machine being lower than sleeping level?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
cwillis
Posts: 71
Joined: Sun Dec 14, 2014 10:47 pm
Location: SF Bay Area
Contact:

machine being lower than sleeping level?

Post by cwillis » Mon Dec 29, 2014 1:36 am

What is the good answer to why my machine has to be lower than my sleeping position. I'm just starting out (been 3 weeks) I want to learn all of the mechanics?

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: SLEEPY Head/ PR System One BiPap Auto w/Bi-Flex

User avatar
kaiasgram
Posts: 3569
Joined: Sat Jun 02, 2012 2:08 pm
Location: Northern California

Re: machine being lower than sleeping level?

Post by kaiasgram » Mon Dec 29, 2014 1:50 am

cwillis wrote:What is the good answer to why my machine has to be lower than my sleeping position. I'm just starting out (been 3 weeks) I want to learn all of the mechanics?
It doesn't absolutely have to be, but if you use humidification then keeping the machine lower than your head helps prevent rainout (water collecting in the mask) by allowing condensation inside the hose to run back downhill toward the machine instead of your head.

_________________
Machine: AirSense 10 AutoSet with Heated Humidifer + Aifit N30i Nasal Mask Bundle
Additional Comments: SleepyHead-now-OSCAR software on Mac OSX Ventura

Guest1

Re: machine being lower than sleeping level?

Post by Guest1 » Mon Dec 29, 2014 2:05 am

I sleep some nights with machine's level 1.5ft above my head and I have no issues whatsoever. But I run a heated humidifier with a heated hose so I don't get rainout issues and thus I avoid the water condensing and entering my mask via gravity.

User avatar
archangle
Posts: 9293
Joined: Sun Mar 27, 2011 11:55 am

Re: machine being lower than sleeping level?

Post by archangle » Mon Dec 29, 2014 5:05 am

It's not necessary. It will blow air perfectly adequately whatever the level is that it's located at.

If you have a problem with rainout (water condensing in the hose), it will help some if the machine is lower than you are because the water will drain back into the machine instead of coming out of the mask. It's not the only way to deal with rainout, though.

_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Also SleepyHead, PRS1 Auto, Respironics Auto M series, Legacy Auto, and Legacy Plus
Please enter your equipment in your profile so we can help you.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.

Useful Links.

User avatar
Wulfman...
Posts: 6688
Joined: Mon Sep 01, 2014 6:41 pm
Location: Nearest fishing spot

Re: machine being lower than sleeping level?

Post by Wulfman... » Mon Dec 29, 2014 1:40 pm

cwillis wrote:What is the good answer to why my machine has to be lower than my sleeping position. I'm just starting out (been 3 weeks) I want to learn all of the mechanics?
In addition to what the others have said.......mostly "It doesn't have to be.", one of the reasons (in the past) was to get the machine below head level to make it quieter.......the sound would be deadened by the bed/mattress, etc......at least for those people who may have been super sensitive to the sounds from the machine.

The top of my machine is about level with the top of my mattress......but only because it worked out that way because of the height of the bedside table it sits on. I also use old, thick mouse pads under the machine to deaden any possible noise, but mainly to keep it from getting accidentally pulled off the table.


Den

.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

User avatar
cwillis
Posts: 71
Joined: Sun Dec 14, 2014 10:47 pm
Location: SF Bay Area
Contact:

Re: machine being lower than sleeping level?

Post by cwillis » Mon Dec 29, 2014 2:33 pm

Thank you so much for all of your insight, the "rainout" issue makes sense. Also I'm not sure my humidifier is actually functioning properly? Turned up all the way to 5 the water only seems to be luke warm, although it does almost dissipate by the morning. I was expecting it to be warmer by the warnings in manual. The manual recommends a setting of 2, as well as numerous posts I've read here.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: SLEEPY Head/ PR System One BiPap Auto w/Bi-Flex

User avatar
palerider
Posts: 32299
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: machine being lower than sleeping level?

Post by palerider » Mon Dec 29, 2014 3:09 pm

cwillis wrote:Thank you so much for all of your insight, the "rainout" issue makes sense. Also I'm not sure my humidifier is actually functioning properly? Turned up all the way to 5 the water only seems to be luke warm, although it does almost dissipate by the morning. I was expecting it to be warmer by the warnings in manual. The manual recommends a setting of 2, as well as numerous posts I've read here.
you need to set it to whatever you need, different people need different amounts, and it changes as the seasons change.

the warmth varies, as well as the amount used, based on both the setting, as well as the room temp and the humidity in the house (the modern units have humidity sensors in them so they can add just enough extra humidity, not just 'lots'.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.