I am so excited! I just got a call today and I am picking up my machine next week, a day before my titration. And the doctor requested the Resmed s9 (the good one with the full data) which was the machine I was going to request anyway. And my insurance is paying for all of it.
SO SO EXCITED!!! Ready to start sleeping!
Machine coming NEXT WEEK!
- chunkyfrog
- Posts: 34544
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Machine coming NEXT WEEK!
Just a reminder: full data is on the Elite and Autoset; anything that says "Escape" does NOT.
Look for yourself; it's the only way to be sure.
And welcome to the forum.
Look for yourself; it's the only way to be sure.
And welcome to the forum.
_________________
| Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Airsense 10 Autoset for Her |
- StuUnderPressure
- Posts: 1378
- Joined: Mon Jun 18, 2012 10:34 am
- Location: USA
Re: Machine coming NEXT WEEK!
And learn how to check the "Run" Hours - to make sure it is NOT a used machine.
Also find out what the latest internal software version is.
Make sure you get a machine with that version.
Also find out what the latest internal software version is.
Make sure you get a machine with that version.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap |
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
Re: Machine coming NEXT WEEK!
ChunkyFrog: I asked them about that, to make sure it does the full data thing and she said it does. "It has a card slot and everything" she said. The Escape models don't have a card slot do they?
How likely is it that I would get a used machine from the hospital? And how hard is it to update the software on these things?
How likely is it that I would get a used machine from the hospital? And how hard is it to update the software on these things?
Re: Machine coming NEXT WEEK!
The card slot means nothing...all the Escape models have a card slot and a SD card but the problem is they only gather hours of use..for compliance requirements.Starpilot wrote: The Escape models don't have a card slot do they?
The Escape Auto...barely better...give the overall AHI...no event category breakdown, no leak, nothing else that is really useful.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
- chunkyfrog
- Posts: 34544
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Machine coming NEXT WEEK!
You need them to plug in the machine and show you the run hours.
If they "can't", they are hiding something!
If they "can't", they are hiding something!
_________________
| Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Airsense 10 Autoset for Her |
Re: Machine coming NEXT WEEK!
I don't think that the firmware on one of these machines is user upgradeable. So it is in your interest to make sure that you get the latest machine with the latest firmware. You can verify the firmware version, it is available via the LCD display in the menus there...I can't help you with that, though, since my cpap is almost 2 years old now. Also, I"d be surprised if each model of the cpap didn't have it's own version of firmware. They could be using one master version with conditional compiles in it, but I'd be surprised if that were the case.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit N30 Nasal CPAP Mask with Headgear |
- StuUnderPressure
- Posts: 1378
- Joined: Mon Jun 18, 2012 10:34 am
- Location: USA
Re: Machine coming NEXT WEEK!
It is VERY highly likely that anyone who thinks they can get away with it WOULD try to foist a USED machine on you. It happens every day.Starpilot wrote:How likely is it that I would get a used machine from the hospital?
The internal software on the S9 Series of machines CAN be upgraded - but I have never heard of anyone being successful in having that done.Starpilot wrote:And how hard is it to update the software on these things?
That is because doing so is very costly.
Your DME would have to ship it directly to ResMed where ResMed will just swap out the entire internal board. They either can not or just will not just update the internal software.
You would have to pay for the DME shipping (both ways) & ResMed's charge for swapping out the entire board.
I was never given the actual cost to do that, but my DME said it was cheaper for them to just give me another machine with the updated software already in it.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap |
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html





