GoodKnight 425 with Silverlining
GoodKnight 425 with Silverlining
Recently purchased and recieved the silverlining software to use with my new 425 after reading the interview above and following the link to the software. After the install I get an error when connecting about it not seeing my machine and something to do with the registry and reinstalling. I have sent an email to cpap.com but thought I might get a quicker response here from some of you guys and gals. I imagine there is an update that I can download does anyone know where on the PB site you can get downloads? The shipped version was 3.3 and I am guesing there is a 3.4 now available. Any help would be apprciated. By the way I really like the machine I first used a vpapII and it was replaced by this one. Very small very quite and so far the sleep has been good. I have a pressure of 14 and 18 the vpapII was more forceful it seems than this one it seems to get on pattern quick and rarely do I fight the machine like before. Anyway new to the board thanks for hearing me out.
Hi Nitroq,
Did you have your virus protection off when you installed the software?
I do believe that version 3.3 is the software that works with the 425. I have 3.2 and that is not that old.
I will check at the office tomorrow and post the answer.
Ted
Did you have your virus protection off when you installed the software?
I do believe that version 3.3 is the software that works with the 425. I have 3.2 and that is not that old.
I will check at the office tomorrow and post the answer.
Ted
_________________
Humidifier: IntelliPAP Integrated Heated Humidifier |
Additional Comments: Patiently waiting for the Intellipap Auto Software |
Titratrator
I didnt but just went back and reinstalled with all that turned off and still no luck. A quick look in the SL3 folder shows exe files for the 418s and 420s but nothing for the 425.
Here is the exact error: Device is not know in registry. Re-Install to register it automatically.
It acts like its reading it on com1 but then fails with that error no errors on the other ports but nothing happens.
I really appreciate your response, thanks Allen
I didnt but just went back and reinstalled with all that turned off and still no luck. A quick look in the SL3 folder shows exe files for the 418s and 420s but nothing for the 425.
Here is the exact error: Device is not know in registry. Re-Install to register it automatically.
It acts like its reading it on com1 but then fails with that error no errors on the other ports but nothing happens.
I really appreciate your response, thanks Allen
The version of Silverlining that will download the Puritan Bennett 425 Bi-Level, is Silverlining version 3.6.
Version 3.6 was reased on December 8, and will be available on Tuesday, December 14.
Regards,
Titrtator
Version 3.6 was reased on December 8, and will be available on Tuesday, December 14.
Regards,
Titrtator
_________________
Humidifier: IntelliPAP Integrated Heated Humidifier |
Additional Comments: Patiently waiting for the Intellipap Auto Software |
Manufactures do not offer upgrade paths from one version to another, you must purchase the software again to get an updated version.
. To use Silverlining software with the 425 bilevel, it must be version 3.6, which wiill be available on Dec. 14.
Titrator
. To use Silverlining software with the 425 bilevel, it must be version 3.6, which wiill be available on Dec. 14.
Titrator
_________________
Humidifier: IntelliPAP Integrated Heated Humidifier |
Additional Comments: Patiently waiting for the Intellipap Auto Software |
DOWNLOAD LATEST VERSION
I have version 3.3, where can I download the latest version?Titrator wrote:The version of Silverlining that will download the Puritan Bennett 425 Bi-Level, is Silverlining version 3.6.
Version 3.6 was reased on December 8, and will be available on Tuesday, December 14.
Regards,
Titrtator
Re: DOWNLOAD LATEST VERSION
Just be sure you don't buy it from cpap.com. I promise you, it won't match up with their description of it, and then they'll refuse to permit you to return it.I have version 3.3, where can I download the latest version?
Silverlining reporting for the 425 (the bi-pap) is far more limited than its reporting for the 420e. Bill, and anyone else with SL3, open one of the 425 demo data files and you'll see that. No apnea's etc reported, and no indexes.
PB sales reps (well, at least one I know of...) seem a bit confused about that, to put it politely, and one of our posters' RT has had a sales rep presenting 420E data as though it belonged to the 425 took a lot of back and forth communitcation to get him to admit his mistake.
If you try to open a 425 manual (also on the ver. 3.6 cd) you will see what looks like an unfinished product.
O.
_________________
CPAPopedia Keywords Contained In This Post (Click For Definition): 420E
PB sales reps (well, at least one I know of...) seem a bit confused about that, to put it politely, and one of our posters' RT has had a sales rep presenting 420E data as though it belonged to the 425 took a lot of back and forth communitcation to get him to admit his mistake.
If you try to open a 425 manual (also on the ver. 3.6 cd) you will see what looks like an unfinished product.
O.
_________________
CPAPopedia Keywords Contained In This Post (Click For Definition): 420E
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Machine: Resmed AirSense10 for Her with Climateline heated hose ; alternating masks. |
And now here is my secret, a very simple secret; it is only with the heart that one can see rightly, what is essential is invisible to the eye.
Antoine de Saint-Exupery
Good advice is compromised by missing data
Forum member Dog Slobber Nov. 2023
Antoine de Saint-Exupery
Good advice is compromised by missing data
Forum member Dog Slobber Nov. 2023