Please update your equipment profile.
You won't find a "leaksense" setting, you will find a "leak alarm".
Please update your equipment profile.
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Simplus Full Face CPAP Mask with Headgear |
Additional Comments: Pressure is set to 10 cmH2O. |
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
good job!walshdr1 wrote: ↑Tue May 24, 2022 4:24 pmI have same cpap. Set 5-20 by doctor. My cpap was (for last 2 years) auto shutting off within seconds of taking off my mask. Few days ago I noticed it was not shutting off at all.
Reading some of this forum someone mentioned swapping out hose. Just did that and problem is fixed. Thanks for who ever gave that recommendation. I hadn’t swapped the hose w my replacement parts.
Out!
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Machine: AirStart™ 10 Auto CPAP with HumidAir™ Heated Humidifier |
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
The machine has a leak threshold which sets when it thinks you've taken off the mask. The small tube allows enough back pressure so that the machine does not feel you've taken off the mask.
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: I use O2Ring, Oscar, SleepHQ, and Cover Roll Stretch mouth tape. |
Given that millions of ResMeds with SmartStart are used every night, and only a few report problems, I fail to see how feel they are more trouble then they are worth.vandownbytheriver wrote: ↑Thu May 16, 2024 9:04 pm
These start/stop features cause more problems than they're worth I feel... just turn them off and use the button, what's so hard?
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: Min EPAP: 8.2, Max IPAP: 25, PS:4 |
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear |
Additional Comments: OSCAR - Linux - Debian 12 with KDE Plasma Desktop |