I have an old machine that a friend gave me that I am going to keep around in case I need a backup. Can anyone tell me if this machine is data capable?
The pap and humidifier are all one unit, they do not detach. The top of it says Respironics, REMstarPlus M Series and there is a sticker that says C-Flex. On the sticker on the bottom of the unit it lists a model # 1022334 and under the barcode H000005604.
Thanks
Old Machine
Old Machine
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: ResScan and Sleepyhead Software / Pad A Cheek Face Mask Liner |
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Old Machine
The word "Plus" in the name means it is a brick!
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
- Wulfman...
- Posts: 6688
- Joined: Mon Sep 01, 2014 6:41 pm
- Location: Nearest fishing spot
Re: Old Machine
As the frog said, it's a non-data-capable machine. ("brick")PatW wrote:I have an old machine that a friend gave me that I am going to keep around in case I need a backup. Can anyone tell me if this machine is data capable?
The pap and humidifier are all one unit, they do not detach. The top of it says Respironics, REMstarPlus M Series and there is a sticker that says C-Flex. On the sticker on the bottom of the unit it lists a model # 1022334 and under the barcode H000005604.
Thanks
But, as long as it's working, keep it for a backup. The humidifier SHOULD detach, if needed......but, as long as you don't have to, I wouldn't.
Den
.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
Re: Old Machine
Give SecondWindCPAP a call 1-855-263-2727 and see if their still taking that model. I got $75.00 for mine about 6 months ago. They refurbish them & give a warranty, if they still take them. Something is better than nothing, but then at the Wulfman said, it can always serve as a backup.PatW wrote:I have an old machine that a friend gave me that I am going to keep around in case I need a backup. Can anyone tell me if this machine is data capable?
The pap and humidifier are all one unit, they do not detach. The top of it says Respironics, REMstarPlus M Series and there is a sticker that says C-Flex. On the sticker on the bottom of the unit it lists a model # 1022334 and under the barcode H000005604.
Thanks
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: SleepyHead software v0.9.2, ResScan 3.7, & U-Sleep. Back up - ResMed S8 VPAP ST with card reader |
26 year Air Force Vet
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
if it isn't grown, then it's has to be mined - prospector
'If you don't stand for something, you will fall for everything.'
A government big enough to give you everything you want is strong enough to take everything you have!
Re: Old Machine
Thanks everyone. I'm going to keep it as a backup. I'm not sure how many hours use this has but from the short conversation we had I'm assuming this has very few hours on it. I'll plug it in tomorrow and see how it's working.
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: ResScan and Sleepyhead Software / Pad A Cheek Face Mask Liner |
Re: Old Machine
Lift up on the front of the blower unit and it will detach from the humidifier. The blower sits on top of the humidifier. However, before you decide to use it without the humidifier, there's a little adapter you need to snap back on to the blower before the hose will attach. Many people lose this part, assuming the DME didn't lose it for them when they bought it.PatW wrote:I have an old machine that a friend gave me that I am going to keep around in case I need a backup. Can anyone tell me if this machine is data capable?
The pap and humidifier are all one unit, they do not detach. The top of it says Respironics, REMstarPlus M Series and there is a sticker that says C-Flex. On the sticker on the bottom of the unit it lists a model # 1022334 and under the barcode H000005604.
Thanks
Humidifier pic.

_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Also SleepyHead, PRS1 Auto, Respironics Auto M series, Legacy Auto, and Legacy Plus |
Please enter your equipment in your profile so we can help you.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.
Useful Links.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.
Useful Links.