You may be able to find inexpensive and small makeup brushes that will do much the same as paintbrushes. Look in dollar or discount stores for all of these type brushes and/ or disposable makeup applicators (small sponge-tipped) that will likely work in small crevices.jmw wrote:I use a small paint brush (artist) and it gets into all of those little corners.
How to clean System One humidifier tank?
- SleepyEyes21
- Posts: 465
- Joined: Thu Aug 07, 2014 9:28 pm
- Location: Central Florida
Re: How to clean System One humidifier tank?
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Additional Comments: viewtopic/t114176/OT-Time-out-andor-Duke-it-out-thread.html |
SleepyEyes21
Re: How to clean System One humidifier tank?
I have always been lazzzy when it comes to washing my PAP gear.
On my old S9 Autoset I dumped the water maybe 3 or 4 times in 2 years and rinsed it with tap water. When I replaced it at about 2 years I could not tel the difference between the old and the new.
My PR is now 1 year old and I decided to rinse it out. That didn't help so I ran it through the dishwasher twice. That got the scum but not the mineral buildup, I think it needs a jack hammer for that.
I may just wait for my next tank replacement.
On my old S9 Autoset I dumped the water maybe 3 or 4 times in 2 years and rinsed it with tap water. When I replaced it at about 2 years I could not tel the difference between the old and the new.
My PR is now 1 year old and I decided to rinse it out. That didn't help so I ran it through the dishwasher twice. That got the scum but not the mineral buildup, I think it needs a jack hammer for that.
I may just wait for my next tank replacement.
_________________
Mask: SleepWeaver 3D Soft Cloth Nasal CPAP Mask with Headgear |
Additional Comments: AurCurve 10 ASV Also using Sleaplyhead 1.1, ResScan 6 and CMS50i |
Re: How to clean System One humidifier tank?
Try a 1 part vinegar 10 part water solution on the minerals.bwexler wrote:I have always been lazzzy when it comes to washing my PAP gear.
On my old S9 Autoset I dumped the water maybe 3 or 4 times in 2 years and rinsed it with tap water. When I replaced it at about 2 years I could not tel the difference between the old and the new.
My PR is now 1 year old and I decided to rinse it out. That didn't help so I ran it through the dishwasher twice. That got the scum but not the mineral buildup, I think it needs a jack hammer for that.
I may just wait for my next tank replacement.
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Also SleepyHead, PRS1 Auto, Respironics Auto M series, Legacy Auto, and Legacy Plus |
Please enter your equipment in your profile so we can help you.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.
Useful Links.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.
Useful Links.
Re: How to clean System One humidifier tank?
This works miracles on mineral/crud build up.Try a 1 part vinegar 10 part water solution on the minerals.
A while back I got a machine that was donated and the tank was NASTY looking from the mineral build up...
I used straight vinegar on it and then rinsed the devil out of it (I hate vinegar stink ) and the tank looked 99% new.
Wasn't perfect but close enough. It was an old, old machine with lots of hours on it so I know that tank was probably the original and it was a M series water chamber which weren't as easy to clean anyway.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: How to clean System One humidifier tank?
I have used a nipple brush to clean the tank, but it's not a perfect solution. It is really difficult to clean around those plastic ribs. Eventually, I realized that our esteemed host, CPAP.com, sells a replacement tank pretty cheaply, like about $26.00. Eventually, I just gave up and got a replacement tank, and it works wonderfully.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Using OSCAR |
Resmed Airsense Autoset 10
Resmed Airfit F20 Mask
Resmed Airfit F20 Mask
Re: How to clean System One humidifier tank?
*mumbles* another plus for resmed.. easyclean tank. no inconvenient ridges all over the place.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- Sir NoddinOff
- Posts: 4190
- Joined: Mon May 14, 2012 5:30 pm
- Location: California
Re: How to clean System One humidifier tank?
I made an earlier entry to this thread when I was using ResMed machines and, yes, those simple tanks are soooo easy to clean. Now that I'm using PR machines it's a whole lot simpler to throw the whole tank bottom and lid onto the upper rack of the dishwasher every couple of weeks. Works like a charm and I've been doing it for a long time. I haven't noticed it harming the tank or its seals at all, plus no mold has appeared.
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2. |
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.
Re: How to clean System One humidifier tank?
Two questions come to mind about use of the dishwasher. 1) do you remove the rubber seal from the tank before washing the tank? and 2) do you run the dishwasher with just the tank in it, or do you just put the tank in with a load of dishes?Sir NoddinOff wrote:I made an earlier entry to this thread when I was using ResMed machines and, yes, those simple tanks are soooo easy to clean. Now that I'm using PR machines it's a whole lot simpler to throw the whole tank bottom and lid onto the upper rack of the dishwasher every couple of weeks. Works like a charm and I've been doing it for a long time. I haven't noticed it harming the tank or its seals at all, plus no mold has appeared.
I'm workin' on it.
- Sir NoddinOff
- Posts: 4190
- Joined: Mon May 14, 2012 5:30 pm
- Location: California
Re: How to clean System One humidifier tank?
<sigh> No I don't futz with the silicone seal at all, I simply take the tank lid off and put the whole assembly in the dishwasher. Also I put it in with a regular load of dishes... I mean, you're gonna eat off the dishes anyway. How dirty is the tank going to be?Hose_Head wrote:Two questions come to mind about use of the dishwasher. 1) do you remove the rubber seal from the tank before washing the tank? and 2) do you run the dishwasher with just the tank in it, or do you just put the tank in with a load of dishes?
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2. |
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.