SleepyHead 0.9.8-1 Testing Builds

[Krelvin]

PDF output from the new 0.98-1 Sleephead. Just pulled new data from the card tonight.

https://www.dropbox.com/s/ywexrjscgkadh ... 2.pdf?dl=0

[jedimark]

PDF output from the new 0.98-1 Sleephead. Just pulled new data from the card tonight.

https://www.dropbox.com/s/ywexrjscgkadh ... 2.pdf?dl=0

Doh! It's not using the new pressure string functions...

It was supposed to be uniform everywhere, but I have forgotten to to fix it in the reports

I'll add this to my list of things to do for 0.9.8-2

[pbriggs]

okay - I could not resist so loaded the new version today (win64). It imported the data from version 0.9.6 (win32) and crashed as it looked like it was finishing the import. Open software again and it shows the user as already open. Rebooted computer and it still shows user as open. Bypassed message and went in and software crashed on opening user (started loading data and it did not look like it even got to 1% when it crashed). Tried it a few times with same results. The 0.9.6 data had been imported from V0.9.3-0 and had the following: 660P, Spo2, bookmarks for 400 and some odd days. The import into V0.9.6 did not report any errors and was working fine.

Created a new profile in V0.9.8-1 and imported data from card, software crashed on finishing import (no specific error given). restarted software and it had imported the data, well 206 days worth which is all that is active on my current card anyway. Going back to 0.9.6 had no data, so the data was moved to the new version, but crashes in the new software as I try to open that profile, as noted above.

Comparing the summary data reported on the left side to the summary data from v0.9.3-0 to the summary data on V0.9.8-1
Minute Ventilation (L/min) Max 17.88 vs 69.5 (verions 0.9.3-0 shown first in all lines)
Respiratory Rate (breaths/min) Max 25 vs 27.73
Inspiratory Time (seconds) Min 0.26 vs 0.4
Inspiratory Time (seconds) Max 3.26 vs 6.64
Expiratory Time (seconds) some rounding differences in x.x# otherwise Max 2.72 vs 4.64
Tidal Volume (ml) m=ax 980 vs 3580
otherwise same

I will pay more later today and report back - perhaps I will try importing into v0.9.6 again and see what happens

[Pirate]

With the preferences set to backup SD card on import; where does the SD card backup go?

[archangle]

With the preferences set to backup SD card on import; where does the SD card backup go?

Click on file - change user. Make a not of the "folder" on the bottom line.

Start with that folder. Underneath that will be "Profiles." Under Profiles will be a directory with your profile/user name. Under profile name will be a machine directory with something like ResMed1234567. Under that will be a bunch of data including a "Backups" directory.

[Sclark08]

I downloaded worked perfect. Thanks

[Pirate]

With the preferences set to backup SD card on import; where does the SD card backup go?

Click on file - change user. Make a not of the "folder" on the bottom line.

Start with that folder. Underneath that will be "Profiles." Under Profiles will be a directory with your profile/user name. Under profile name will be a machine directory with something like ResMed1234567. Under that will be a bunch of data including a "Backups" directory.

Thank you.

[OldLincoln]

I first start the pgm and the overview and statistics windows fit correctly in full size. However Daily and Overview stretch the window to the right past the viewing area. I tried manipulating the right border but it refuses to budge.

Still having a few problems with this on WinXP with smaller resolution screens, there is a Qt bug that affects widget resizing that I can't figure a workaround for.

It resized properly on 0.9.6.1 so I s'pose that part changed. My 0.9.3.0 still works well so not a big deal, but I do like what I saw in 9.8.1 although it still won't take my CMS50F New Version. I can wait patiently though.

[palerider]

but I do like what I saw in 9.8.1 although it still won't take my CMS50F New Version. I can wait patiently though.

you have to go into the oximeter upload screen and select the new style cms50f, (3.7+ I think).

as noted, SH does work great with *both* the F, as well as the H and I units, though you do have to tell it which style you have (there were massive changes between the old and new F as far as how it talks to the computer.)

[OldLincoln]

Thanks, Palerider. I had the wrong CMS50f selected. It read the device well but the screen went wide again and I haven't imported past data. I saw the data in the statistics and wonder if there will be a graph for it sometime. Again, I'm not dying here so not a big deal. I like playing with stuff and figuring out what;s going on is all.

[SleepyToo2]

Great work, Mark! Fantastic, even! I love the TTIA graph on the Overview page - I am sure that has some relationship to how good or bad you feel when you wake up, but I have no evidence to prove it. The first machine I had did tell me TTIA, but I have been hoping for it to reappear ever since. Now it has, so thank you!

I am running the Broken GL 64-bit version. Apart from needing 7-Zip to extract it, and an updated version of Visual C++ redistributed, it installed perfectly. The issues I was having in version 0.9.6 with ridiculous readings for a couple of items have gone away, so that's good news.

Couple of observations:

1. Statistics - the lowest and highest AHI sessions are highlighted, including one of each that were only 2 days long. Is that the new normal?

2. Leak Rate - no way to add average lines to the overview chart? I figured them out for the daily charts.

3, Some explanation of the averages above the chart on the Overview page would be helpful. Mine has AHI 0.29 / 6.43 /1.59, etc. MIn and max are fine - but the 6.43 doesn't make sense over the last 2 weeks.

Thanks again for the time and effort put into making this program as great as it is. Docs should want to see the outputs so they can help their patients do better! By using this software I have worked out that I don't need so much pressure as the doc thought I did, I don't need C-Flex at all, but I do need some humidity.

[calusa]

The latest Sleepyhead release is great!

A couple of questions, if anyone knows the answers . . .

I really like being able to set the Y-axis on the graphs, instead of the software constantly resetting it every day. Can I make my Y-axis choices stick so they'll be the same every time I open the software?

Also, on the daily graphs, I can reorder the graphs by dragging them up on or down so that the ones I care about most are on top -- but that order now disappears when I close the software. I'd like it to stay the same every day.

[palerider]

Thanks, Palerider. I had the wrong CMS50f selected. It read the device well but the screen went wide again and I haven't imported past data. I saw the data in the statistics and wonder if there will be a graph for it sometime. Again, I'm not dying here so not a big deal. I like playing with stuff and figuring out what;s going on is all.

there should be a graph for both spo2 and pulse rate, they show up below the rest of the graphs by default.

they only show up on th days where there's data.

[palerider]

The latest Sleepyhead release is great!

A couple of questions, if anyone knows the answers . . .

I really like being able to set the Y-axis on the graphs, instead of the software constantly resetting it every day. Can I make my Y-axis choices stick so they'll be the same every time I open the software?

Also, on the daily graphs, I can reorder the graphs by dragging them up on or down so that the ones I care about most are on top -- but that order now disappears when I close the software. I'd like it to stay the same every day.

both of those are persistent between runs normally.

what os, version, and everything else are you using?

[calusa]

I've been running Sleepyhead for about two months; just installed the latest version (0.9.8-1) yesterday.

I didn't have a problem before keeping the graphs I wanted on top stable between sessions.

I running Windows 7 Pro on a fairly powerful homebrew machine.