Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Sleepyhead only shows 3hrs 45min when I slept 8hrs.
What happened?
What happened?
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Pictures of what you are seeing on the detailed report please.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Can you do another screen shot please?
This time the entire detailed report so it looks like this one below?
Don't zoom in on anything.
Did you wake during the night? Turn machine off for a little while?

This time the entire detailed report so it looks like this one below?
Don't zoom in on anything.
Did you wake during the night? Turn machine off for a little while?

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
http://s1262.photobucket.com/user/fastf ... 2.png.html
I do not know how to scroll down when copying the page hope this helps.
I do not know how to scroll down when copying the page hope this helps.
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Did you wake up at 3:26 AM by chance? Turn off the machine? Have a power outage?
I assume the machine was still blowing as usual when you turned it off at 8 AM?
Try this..
put the SD card back into the PR S1 and let it write to the SD card...and then remove it and import/download the data again and see if the time that you ended the night changes. It only takes a minute or so to finish writing anything it has stored to the SD card.
Also...on the left side of the report there is a little slider bar just to the right of the pie chart. Click and drag it down to the very bottom until you see sessions with a little green/black box. How many sessions is it showing?
I assume the machine was still blowing as usual when you turned it off at 8 AM?
Try this..
put the SD card back into the PR S1 and let it write to the SD card...and then remove it and import/download the data again and see if the time that you ended the night changes. It only takes a minute or so to finish writing anything it has stored to the SD card.
Also...on the left side of the report there is a little slider bar just to the right of the pie chart. Click and drag it down to the very bottom until you see sessions with a little green/black box. How many sessions is it showing?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
http://s1262.photobucket.com/user/fastf ... 3.png.html
Yes I got up one time and rite back in bed and did turn it off for that, I'd forgot that I did that.
It shows 2 sessions
Yes I got up one time and rite back in bed and did turn it off for that, I'd forgot that I did that.
It shows 2 sessions
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Looks like the report is now showing the correct time slept as I see it ending at around 8 AM.
What did you do? Reinsert the SD card in the machine and try again?
The session thing...they should be green...when they are red that session is turned off but it would have be something I doubt you would have done because you probably didn't even know about it.
Anytime the machine is turned off and then back on again it will start a new session. SleepyHead normally combines the sessions unless the session is extremely brief.
I was just asking in case it only showed one session.
The machine stores almost all the data from the night on its internal memory for a period of time so inserting the SD card back in the machine will allow the machine to write any missing data to the SD card. For some reason the machine didn't do it at 8 AM when it should have...did you maybe pull the SD card out really quick when you woke up?
Anyway...it's fixed for now.
How are you doing otherwise with the mask and machine?
What did you do? Reinsert the SD card in the machine and try again?
The session thing...they should be green...when they are red that session is turned off but it would have be something I doubt you would have done because you probably didn't even know about it.
Anytime the machine is turned off and then back on again it will start a new session. SleepyHead normally combines the sessions unless the session is extremely brief.
I was just asking in case it only showed one session.
The machine stores almost all the data from the night on its internal memory for a period of time so inserting the SD card back in the machine will allow the machine to write any missing data to the SD card. For some reason the machine didn't do it at 8 AM when it should have...did you maybe pull the SD card out really quick when you woke up?
Anyway...it's fixed for now.
How are you doing otherwise with the mask and machine?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Yes I pulled the card out within 1 minute of shutting it off.
I was wanting to see the data because it was the first full night I had slept with CPAP.
Is stopping breathing for 20-30 seconds unusual?
I was wanting to see the data because it was the first full night I had slept with CPAP.
Is stopping breathing for 20-30 seconds unusual?
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
That explains it..you just pulled the SD card out a little too soon. It didn't have enough time to finalize things.tired57 wrote:Yes I pulled the card out within 1 minute of shutting it off.
I was wanting to see the data because it was the first full night I had slept with CPAP.
Is stopping breathing for 20-30 seconds unusual?
When you turn it off you can watch it do its thing to make sure it gets done or just wait 3 or 4 minutes...doesn't really take that long but gives you a little cushion so this doesn't happen again.
Stopping breathing for 20 to 30 seconds..not unusual..that's why they call it sleep apnea. I have seen some 45 to 60 second duration events but most are around 10 to 20 seconds.
You might want to increase that minimum pressure 0.5 cm if your reports still show some snores and Flow limitations like this one last night did.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
-
- Posts: 748
- Joined: Sun Jun 24, 2012 12:39 pm
- Location: Cochise County AZ
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Glad your getting it figured out Dave!
Have you gotten the O2 reports to down load yet?
Have you gotten the O2 reports to down load yet?
"I am a man of peace, but if war comes to my door it will find me home." - Winston Churchill
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Igave up trying the get the 02 thing to work, I may got look for a better one cus I'd really like to my lowest 02 for a night.
Do you know of a GOOD 02 meter?
Do you know of a GOOD 02 meter?
123.Shawn T.W. wrote:Glad your getting it figured out Dave!
Have you gotten the O2 reports to down load yet?
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Didn't you have some weird brand pulse oximeter?
I had good luck with the CMS 50-D Plus myself.
http://www.pulseoxstore.com/Downloadable-Pulse-Ox.html
I had good luck with the CMS 50-D Plus myself.
http://www.pulseoxstore.com/Downloadable-Pulse-Ox.html
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Pugsy wrote:Didn't you have some weird brand pulse oximeter?
I had good luck with the CMS 50-D Plus myself.
http://www.pulseoxstore.com/Downloadable-Pulse-Ox.html
Do you know if that one can be purchased in a store not online?
Re: Sleepyhead only shows 3hrs 45min when I slept 8hrs.
Not these that I know of.tired57 wrote: Do you know if that one can be purchased in a store not online?
Are you talking about a DME type of store?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.