Error Code 45

[CharlesG1962]

E-45 ERR_VBULK_FAILURE •Defective power supply •Replace Main PCA
I have had this error code for some time now. Does this code make a difference. Can someone tell me what it means what is Main PCA. Thanks for much sorry if this has been asked again.

[Bill44133]

E-45 ERR_VBULK_FAILURE •Defective power supply •Replace Main PCA
I have had this error code for some time now. Does this code make a difference. Can someone tell me what it means what is Main PCA. Thanks for much sorry if this has been asked again.

I found this topping from 2008 that lists the error codes.
viewtopic/t27643/Does-anyone-know-the-e ... R-Pro.html

I hope this helps.. I would contact whoever(DME) sold you the machine and see if they can get your machine fixed for you. Maybe it is still under some type of warranty.

Good Luck!

[CharlesG1962]

thanks so much I go to the VA in Jackson MS. I have told them this machine has never worked or made me feel better. I will try next week and see if they will help me. I also now have a error code for the micro disk. I wish I could find out what the Power Supply does or will it make the machine not work right.

[Sludge]

OK, I have bafflement. If you have a PRS1, then E45 Error Code should be ERR_NV_CALLBACK_NULL. Where are you seeing ERR_VBULK_FAILURE •Defective power supply •Replace Main PCA?

[CharlesG1962]

Under Compliance VIC, Check Code 45.
Philips Respironics Remstar pro C flex +

Thanks for all the help everyone

[CharlesG1962]

I have listed what type machine I have but it doesn't show up from what I see.

[Sludge]

Under Compliance VIC, Check Code 45.
Philips Respironics Remstar pro C flex +

OK, but if you got the code explanation from that old thread, that won't help. Those codes are 2 generations old (the thing before M-Series):



and they change between generations. Actual code for your machine is what I have listed above.

[CharlesG1962]

Thanks a ton. I have a hard time understanding all this stuff. So the code I have is it something to worry about? Again thanks so much. I have had this machine since 2010 and have never seen and improvement.

[Sludge]

So the code I have is it something to worry about?

E-45 is a REBOOT error (the machine simply fires up again), so I do not know (vs. the machine is definitely faulty). The best answer is to take it somewhere where they can clear the Error Log and see if it reappears.

[CharlesG1962]

thanks so much.