New full face mask - Quattro Air

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
kong
Posts: 105
Joined: Thu Mar 01, 2012 7:06 pm
Location: Clovis, California

Re: New full face mask - Quattro Air

Post by kong » Sat May 18, 2013 2:59 am

Here is an excerpt from a document ResMed submitted to the FDA:

"The main differences between Quattro Air and the predicate maskMirage Quattro are in the number of components, their geometry and how individual components interface with each other. These technological characteristics do not impact the fundamental operating principle of the device nor its therapeutic effect. Performance data is available to show that no new questions of safety or efficacy have been raised as a result of these differences." (510(k) Summary [http://www.accessdata.fda.gov/cdrh_docs ... 123979.pdf].)

_________________
MachineMask
Additional Comments: ClimateLineAir tube, Oscar software. Tried nasal masks, and nasal pillows, all unsuccessfully.
Resmed Airsense 11 Autoset, Mirage FF Quattro. Severe OSA. Pressure set 8-16.

User avatar
SleepWellCPAP
Posts: 370
Joined: Fri Mar 22, 2013 11:44 am
Location: Naples Florida
Contact:

Re: New full face mask - Quattro Air

Post by SleepWellCPAP » Sat May 18, 2013 5:00 pm

Hello All!

Just a short comment. The idea of losing the seal with the Mir FX seems to be quite common. I had a patient use Lansinoh on the cushion and even with the strap adjusted loosely, the mask stayed in place all night. I know it's preferred for nasal pillow masks, but it seems to work with the Mirage and Quattro Fxs, and probably would work with this one as well.

Jim
Jim Swearingen
Author of the book Sleep Well & Feel Great with CPAP, a definitive guide
For a free copy inquire with your local county librarian
CPAPtalk featured - Also available through Barnes & Noble Booksellers

User avatar
RandyJ
Posts: 1673
Joined: Thu Apr 21, 2011 7:22 pm
Location: Connecticut, USA

Re: New full face mask - Quattro Air

Post by RandyJ » Sat May 18, 2013 5:36 pm

jdm2857 wrote:The headgear attachment has not been a problem during the few nights I've used the Mirage FX;
the mask riding up and irritating the bottom of my nose has been.
+1 (on occasion) By and large I never had a problem with the Mirage FX. Despite chunkyfrog's reservations about the headgear attachment, it never came loose or off during the night on me and I never had seal or leak problems with it.

My first impression is that it will be a big improvement on the current Mirage Quattro.

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Backup & Travel Machines: PR System One Bipap Auto, S9 VPAP Auto, S9 Autoset, Oximeter CMS-50E
Diagnosed March 2011, using APAP 14 - 16.5 cm, AFlex+ 2
Alt masks Swift FX pillows, Mirage FX nasal mask, Mirage Quattro full face mask

User avatar
DoriC
Posts: 5214
Joined: Sat Sep 13, 2008 9:28 pm
Location: NJ

Re: New full face mask - Quattro Air

Post by DoriC » Sat May 18, 2013 8:33 pm

How long does it usually take from submission to the FDA then to approval and then to market?

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: 14/8.4,PS=4, UMFF, 02@2L,
"Do or Do Not-There Is No Try"-"Yoda"
"We are what we repeatedly do,so excellence
is not an act but a habit"-"Aristotle"
DEAR HUBBY BEGAN CPAP 9/2/08

User avatar
mollete
Posts: 1001
Joined: Thu Jan 10, 2013 5:45 am

Re: New full face mask - Quattro Air

Post by mollete » Sun May 19, 2013 2:49 am

According to the above quoted document:

http://www.accessdata.fda.gov/cdrh_docs ... 123979.pdf

looks to be about 6 months.

User avatar
mollete
Posts: 1001
Joined: Thu Jan 10, 2013 5:45 am

Re: New full face mask - Quattro Air

Post by mollete » Sun May 19, 2013 3:24 am

The commercial looks like it was written by the Wachowskis:

http://www.rmdassets.com/masks/quattroa ... oAirLaunch

User avatar
NateS
Posts: 1716
Joined: Wed Dec 14, 2011 8:53 pm
Location: Kaatskill Mts-Washington Irving

Re: New full face mask - Quattro Air

Post by NateS » Sun May 19, 2013 8:50 am

mollete wrote:The commercial looks like it was written by the Wachowskis:

http://www.rmdassets.com/masks/quattroa ... oAirLaunch
Watching the video, I was thinking of The Flying Wallendas!

Regards, Nate

_________________
Mask: DreamWear Nasal CPAP Mask with Headgear
Additional Comments: ResMed AirCurve 10 ASV; Dreamwear Nasal Mask Original; CPAPMax Pillow; ResScan & SleepyHead
Central sleep apnea AHI 62.6 pre-VPAP. Now 0 to 1.3
Present Rx: EPAP: 8; IPAPlo:11; IPAPHi: 23; PSMin: 3; PSMax: 15
"I've had a perfectly wonderful evening, but this wasn't it." —Groucho Marx

DaveL
Posts: 355
Joined: Sun Jan 07, 2007 8:06 pm
Location: Hazeltown, Ontario Canada

Re: New full face mask - Quattro Air

Post by DaveL » Sun May 19, 2013 9:20 pm

SleepWellCPAP wrote:Hello All!

Just a short comment. The idea of losing the seal with the Mir FX seems to be quite common. I had a patient use Lansinoh on the cushion and even with the strap adjusted loosely, the mask stayed in place all night. I know it's preferred for nasal pillow masks, but it seems to work with the Mirage and Quattro Fxs, and probably would work with this one as well.

Jim
Just tried 7 ffm's, one at a time, and I'm a little sensitive to what we all do to get a good seal with our masks/each required 1/2 day vacation time taken, and although service was good that is a very heavy load. (I don't get as many vacation days as I would like.)

I've never heard of Lansinoh. Please elaborate.
Thanks
Dave
Toronto

_________________
Mask: DreamWear Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: S8 Ellite II Cpap Machine as backup
Regards,
DaveL Toronto

User avatar
Jay Aitchsee
Posts: 2936
Joined: Sun May 22, 2011 12:47 pm
Location: Southwest Florida

Re: New full face mask - Quattro Air

Post by Jay Aitchsee » Mon May 20, 2013 5:14 am

DaveL wrote:I've never heard of Lansinoh. Please elaborate.
Here are 23 threads that mention lansinoh in the title:
search.php?st=0&sk=t&sd=d&keywords=%2Bl ... =titleonly

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: S9 Auto, P10 mask, P=7.0, EPR3, ResScan 5.3, SleepyHead V1.B2, Windows 10, ZEO, CMS50F, Infrared Video

DaveL
Posts: 355
Joined: Sun Jan 07, 2007 8:06 pm
Location: Hazeltown, Ontario Canada

Re: New full face mask - Quattro Air

Post by DaveL » Mon May 20, 2013 6:43 am

Jay thank you for posting. (and thanks; I didn't do a search, and should have.)

_________________
Mask: DreamWear Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: S8 Ellite II Cpap Machine as backup
Regards,
DaveL Toronto

DaveL
Posts: 355
Joined: Sun Jan 07, 2007 8:06 pm
Location: Hazeltown, Ontario Canada

Re: New full face mask - Quattro Air

Post by DaveL » Mon May 20, 2013 6:46 am


_________________
Mask: DreamWear Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: S8 Ellite II Cpap Machine as backup
Regards,
DaveL Toronto