Sleep style 200

[Josesgirl#60]

Does anyone know how to set the pressure on the Sleep style 200?

[morrigan]

If you hold down the top and bottom buttons (CMH20 and arrow) for a few seconds, you can access the admin menu that will allow you to change the pressure.

Once you get in there, you can use the arrow button to forward through the fields and the up and down buttons to adjust your pressure.

[Wulfman...]

Does anyone know how to set the pressure on the Sleep style 200?

Which specific model do you have?
If you go up to the Search line and type in "Sleepstyle 200 pressure change" there are some posts that describe how.

Here are some instructions for an HC234:

- Turn on the HC234.

- Enter programming mode by holding down the "RAMP" (top) button and the "Next" (Right arrow/bottom button) for three seconds.

- The first screen will allow you to set adjust altitude, which is indicated by a drawing of a mountain range on the screen. You can change this to "m" for meters or "ft" for feet by pressing the Up or Down keys. Press the Right Arrow key to allow changing the altitude setting.

- Press the "NEXT" (Right arrow/bottom button) to advance to pressure setting which will be indicated by the characters "cm h20 " on the screen. Use the Up and Down keys to change the pressure setting.

- Lastly, push that bottom button again to exit programming mode.


Den

.