Actually unless I see a real pressing need for an auto range of pressures I would suggest that a newbie use a small range to start with. Mainly because when we are so new to this therapy sometimes the least little thing just adds more sleep disruptions into the mix. Sometimes the machine goes chasing those snores to the point of being annoying.
APAP mode and pressure variations associated with it can sometimes disturb sleep...and we don't want anything to disturb our sleep because it is already pretty fragile and especially when just starting out on this therapy.
Some people find that even very minor pressure changes cause awakenings.
Now me....I use a wide open range because I have discovered with some experimentation that I sometimes need a lot more pressure and I can sleep through changes from my 10 minimum (when I was using APAP) and my max was 20 cm and I would on occasion get real close to that maximum.
But even I started out with a tight range till I figured out where I needed to go. See this old thread of mine to get an idea what and why I did what I did.
viewtopic.php?f=1&t=42302&p=372692#p372692
So actually for a newbie I would suggest a rather tight range to start with just to get the feel of where the pressure is wanting to go and see if pressure changes were maybe a disruptive factor to sleep in general. Your 8 cm pressure is real close to probably being an ideal pressure anyway.
I would suggest a tight range like 8 to 10 to start with. If you happen to have some clusters of hyponeas at the 10 maximum then we could maybe open it up a little to see where it wants to go. If your snores are still numerous with 8 to 10 range..maybe a little more minimum pressure to do a better job of holding the airway open and preventing the collapse rather than trying to play catch up after the fact.
I may have to RISE but I refuse to SHINE.