The "production" of getting ready for bed

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
the_nap_ster
Posts: 210
Joined: Sun Apr 08, 2012 4:15 pm

The "production" of getting ready for bed

Post by the_nap_ster » Thu May 10, 2012 7:29 pm

Hello all,

I just cut a million sheets of moleskin into appropriately sized bits for the bridge of my nose, and it got me thinking

There are a lot of bits and bobs involved for me now in getting ready for bed. The new, OSA-related parts include filling my humidifier tank, applying a fresh piece of moleskin if I'm wearing a FF mask (chin strap and/or tape if I'm wearing my Aloha), putting my hair in a low ponytail to anchor my mask, irrigating my sinuses with a neti squeeze bottle, wiping my skin down with a final toner to make sure everything is oil free, and finally... putting on my mask/turning on my machine and going to sleep.

This routine isn't that shocking for me since, in my pre-PAP days, I still had a ritual involving salt water and tiny bandaids over my piercings, in addition to the normal grooming stuff like tooth-brushing and face-washing. But now that I'm a PAPster, I do have to start the "getting ready" ritual about 15-30 min earlier. I could probably do it in less time if I had to, but rushing makes me more likely to forget steps!

So I'm curious. Do you do extra "getting ready for bed" stuff that you didn't do pre-OSA? Does it take additional time? Or do you just throw your mask on and jump into bed?

_________________
Machine: AirSense 11 Autoset
Mask: Amara View Full Face CPAP Mask with Headgear
Additional Comments: Pressure range 10-14 cmH20

User avatar
Pugsy
Posts: 65011
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: The "production" of getting ready for bed

Post by Pugsy » Thu May 10, 2012 7:41 pm

I try to top off the water earlier in the day so I won't forget. Any washing of the nasal pillows is done during the day and I put a fresh nasal pillow on (I rotate them) as part of cleaning routine. So at bedtime all I do is throw the mask on and jump in bed. I am fortunate that I don't need any chin straps or tape or anything along those lines. Wear my hair short so nothing to do there.
I keep telling people I am a lazy sort...no need to lie about it.
Brush my teeth, wash my face and put on my anti wrinkle cream and that is about it.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

ems
Posts: 2757
Joined: Fri Jul 29, 2011 12:46 am

Re: The "production" of getting ready for bed

Post by ems » Thu May 10, 2012 7:56 pm

And occasionally, I've forgotten the anti-wrinkle cream... I mean... who is gonna see the wrinkles through the mask?
If only the folks with sawdust for brains were as sweet and obliging and innocent as The Scarecrow! ~a friend~

User avatar
squid13
Posts: 2301
Joined: Fri Jul 15, 2011 3:47 pm
Location: Pensacola, FL

Re: The "production" of getting ready for bed

Post by squid13 » Thu May 10, 2012 8:11 pm

It's turned into a regular Hollywood production.

_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier
Mask: Evora Full Face Mask - Fitpack
Additional Comments: AirCurve 10 ASV, Oscar V1.0.1-r-1
US Navy Retired 1973,AirCurve 10 ASV, Mode: ASV Auto, Min EPAP: 7.2, Max EPAP: 15.0, Min PS:4.0, Max PS: 15.0, Mask ResMed Airtouch F20, Backup: (2) AirCurve 10 ASV

User avatar
2 B Sleeping Soundly
Posts: 822
Joined: Sat Nov 05, 2011 2:24 pm
Location: Southern California

Re: The "production" of getting ready for bed

Post by 2 B Sleeping Soundly » Thu May 10, 2012 8:39 pm

I try to get everything that it is possible to do done ahead of time (45 - 60 minutes) before the I go to bed. There is nothing worse for my sleep hygiene then being very sleepy but still having to do a bunch of things before you can go to bed. It always wakes me back up and takes me a little longer to get that nice sleepy feeling back. So with most everything done, when it is finally time to 'hit the sack' it is just some lip balm, my chin strap, connect the hose, and then mask-up and drift off into PAP land! Plus, by doing most of the nightly ritual ahead of time, I can relax a little before going to bed by watching a little TV or coming on our little forum and seeing what is up in the hose head world .

John

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Additional Comments: 11-09-11 Start PAP therapy. Current settings: APAP 13cmH2O - 17cmH2O / Ramp, off / A-Flex, off / Respironics Premium Chin Strap / Sleepyhead Software
One time a cop pulled me over for running a stop sign. He said, "Didn't you see the stop sign?" I said, "Yeah, but I don't believe everything I read." -- Steven Wright

User avatar
chunkyfrog
Posts: 34545
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nowhere special--this year in particular.

Re: The "production" of getting ready for bed

Post by chunkyfrog » Thu May 10, 2012 8:41 pm

What wrinkles?

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

User avatar
2 B Sleeping Soundly
Posts: 822
Joined: Sat Nov 05, 2011 2:24 pm
Location: Southern California

Re: The "production" of getting ready for bed

Post by 2 B Sleeping Soundly » Thu May 10, 2012 8:47 pm

chunkyfrog wrote:What wrinkles?
Remember, not everyone can have that nice moist frog skin and beautiful smooth green complexion... some people have to really work at it

John

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Additional Comments: 11-09-11 Start PAP therapy. Current settings: APAP 13cmH2O - 17cmH2O / Ramp, off / A-Flex, off / Respironics Premium Chin Strap / Sleepyhead Software
One time a cop pulled me over for running a stop sign. He said, "Didn't you see the stop sign?" I said, "Yeah, but I don't believe everything I read." -- Steven Wright

the_nap_ster
Posts: 210
Joined: Sun Apr 08, 2012 4:15 pm

Re: The "production" of getting ready for bed

Post by the_nap_ster » Thu May 10, 2012 8:49 pm

Oh! This might be as good a place as any to ask this, so here goes:

For those of you who use wrinkle cream/moisturize/lip balm/etc, do you do anything special to make sure the product residue doesn't touch your mask? Should I worry about shortening the life of my mask by using moisturizers before bed? I've been avoiding them to err on the side of caution, but in a contest between my vanity and my pocketbook (keeping masks good for as long as possible), my vanity often wins.

Is this something I should just not worry about?

_________________
Machine: AirSense 11 Autoset
Mask: Amara View Full Face CPAP Mask with Headgear
Additional Comments: Pressure range 10-14 cmH20

User avatar
Suzjohnson
Posts: 499
Joined: Fri Apr 13, 2012 8:49 am
Location: Dammeron Valley, UT

Re: The "production" of getting ready for bed

Post by Suzjohnson » Thu May 10, 2012 9:14 pm

chunkyfrog wrote:What wrinkles?
I think that's why I was upset over wearing a full face mask before I found liners - couldn't wear my cream. The Aloha mask has solved that problem though.

I usually clean my pillows and empty the water tank in the morning when I make the bed. Then re-fill the water tank late afternoon. Wash my face after dinner and brush teeth before going to bed. Hop into bed and read until my eyes are slamming shut then don the chinstrap, mask, hose (in bed), turn out the light. Actually sometimes I'm so sleepy I forget to turn off the light. Had to stop reading all masked up because I was waking up in the morning with the light blazing and glasses still on and ridiculously askew. Not what you would call a light sleeper.

Suz

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: SleepyHead, CMS 50D+, Deluxe Chinstrap, began CPAP 4/21/2012
"We are what we repeatedly do, so excellence is not an act but a habit". ~ Aristotle

User avatar
BlackSpinner
Posts: 9742
Joined: Sat Apr 25, 2009 5:44 pm
Location: Edmonton Alberta
Contact:

Re: The "production" of getting ready for bed

Post by BlackSpinner » Thu May 10, 2012 9:28 pm

the_nap_ster wrote:Oh! This might be as good a place as any to ask this, so here goes:

For those of you who use wrinkle cream/moisturize/lip balm/etc, do you do anything special to make sure the product residue doesn't touch your mask? Should I worry about shortening the life of my mask by using moisturizers before bed? I've been avoiding them to err on the side of caution, but in a contest between my vanity and my pocketbook (keeping masks good for as long as possible), my vanity often wins.

Is this something I should just not worry about?
Use liners. Not that I use creams. But my skin doesn't always like the silicon.

As far a night time routines - I fill the humidifier. I do the usual night things, get into bed, read a while, put on lip chap and my mask.

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Additional Comments: Quatro mask for colds & flus S8 elite for back up
71. The lame can ride on horseback, the one-handed drive cattle. The deaf, fight and be useful. To be blind is better than to be burnt on the pyre. No one gets good from a corpse. The Havamal

Janknitz
Posts: 8503
Joined: Sat Mar 20, 2010 1:05 pm
Location: Northern California

Re: The "production" of getting ready for bed

Post by Janknitz » Thu May 10, 2012 10:13 pm

You know your adaptation is complete when you realize you got into bed, slapped the mask on your face, and went to sleep. I think that was about 6 months in for me.

AlI do these days is blow my nose, check the water level, strap it on and sleep.
What you need to know before you meet your DME http://tinyurl.com/2arffqx
Taming the Mirage Quattro http://tinyurl.com/2ft3lh8
Swift FX Fitting Guide http://tinyurl.com/22ur9ts
Don't Pay that Upcharge! http://tinyurl.com/2ck48rm

User avatar
Starlette
Posts: 1728
Joined: Mon Feb 08, 2010 9:30 pm
Location: Denver, CO

Re: The "production" of getting ready for bed

Post by Starlette » Thu May 10, 2012 10:38 pm

squid13 wrote:It's turned into a regular Hollywood production.
Good thing I had an empty bladder when I read your post Squid, absolutely too funny! Unfortunately, VERY true!
Agreed, now it takes me about 30 minutes to get ready for bed. Pisses me off to no end that Hubbs just waltzes into the bedroom takes off his glasses and glides into bed for the night. Normally, he'll wait for my "production" to end, then I call him up to bed unless he's really tired.

@the_nap_ster - RE: Moisturizers. No matter what the mask of choice is for the night (atm it's Aloha), I've never worried about it. I've used Olay Night Moisturizer like forever. I'm not going to stop using it due to a mask. I've changed enough due to this disorder, I'll continue to use what makes me feel comfy and clean for bed. Not giving that up.
2 B Sleeping Soundly wrote:
chunkyfrog wrote:What wrinkles?
Remember, not everyone can have that nice moist frog skin and beautiful smooth green complexion... some people have to really work at it

John
What John said

Starlette

_________________
MachineMask
Additional Comments: Silent Nite Dental Appliance

User avatar
Kody
Posts: 336
Joined: Mon Sep 05, 2011 5:18 pm
Contact:

Re: The "production" of getting ready for bed

Post by Kody » Thu May 10, 2012 11:31 pm

This is the only part that annoys me a little. After 10 months finally getting it streamlined, but still kind of a hassle. I've broken the process into two stages, the morning and the evening parts.
When I first wake up turn off the machine, pull the hose off and remove the humidifier, wipe down mask and put it in a large plastic zip baggy too keep it somewhat dog hair free... Then pull the data card for viewing over a cup of coffee. Empty the humidifier and let dry all day. Night time refill the humidifier and put back in machine, shove data card back in, and reconnect hose.

lately I have been having trouble with the humidifier flapper part and I don't find out if it's working correctly until I mask up and turn it on. If it's screwing up, since the wife is already asleep, I have to become Macgyver in the dark. Shove a mini flashlight in my mouth pointed at the flapper and disconnect and reconnect. Usually I end up getting frustrated and swearing at it, so she wakes up anyway! Now I have been "testing" everything before hand in the light to avoid fumbling around in total darkness.
Complex Sleep Apnea

CatButler
Posts: 17
Joined: Tue May 08, 2012 7:22 am

Re: The "production" of getting ready for bed

Post by CatButler » Fri May 11, 2012 6:20 am

I've joked with my wife about all the "gear" I have to put on and the order I put it on. Getting the humidity chamber ready, then reassembly the mask if I have taken it apart to clean it. I usually now wash my face at night because I feel the mask works better. Then I strap on a night time wrist brace I use for hand problems. Flatten out and arrange my pillow. God forbid I do things in the wrong order. I thought about a Zeo, but it would just be one more piece of gear to keep up with. There's no more I'm just tired and flop in bed

_________________
Mask

User avatar
JohnBFisher
Posts: 3821
Joined: Wed Oct 14, 2009 6:33 am

Re: The "production" of getting ready for bed

Post by JohnBFisher » Fri May 11, 2012 6:55 am

It used to be a production .. but I'll be honest .. after the first couple of years, I decided that I did not need to go through all the rigmarole .. I just get in bed, put on the mask and fall asleep. Why make life more complicated that it has to be? 22 or 23 years later that's all I do ... it works. It continues to work.

_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Additional Comments: User of xPAP therapy for over 20 yrs. Resmed & Respironics ASV units with EEP=9cm-14cm H2O; PSmin=4cm H2O; PSmax=15cm H2O; Max=25cm H2O
"I get up. I walk. I fall down. Meanwhile, I keep dancing” from Rabbi Hillel
"I wish to paint in such a manner as if I were photographing dreams." from Zdzisław Beksiński