Resmed S9 latest firmware 905

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
latinlover
Posts: 14
Joined: Sat Feb 04, 2012 6:53 pm

Resmed S9 latest firmware 905

Post by latinlover » Sat May 05, 2012 10:39 pm

is there any reason to update the firmware from 903 in my machine, to the latest 905?
is it possible to do it by ourselves or do we have to do it through a DME?
one of my machines I purchaswed not through a DME and i would have a hard time getting a DME to change it.
thank you for your help

_________________
Humidifier

-tim
Posts: 710
Joined: Sat Dec 03, 2011 7:46 pm
Location: Melbourne Australia

Re: Resmed S9 latest firmware 905

Post by -tim » Sun May 06, 2012 4:01 am

All you need is right software on an SD card and plug it in and the machine will do the rest by its self. Only DMEs can get the card (I expect).

If you happened to find a card, I expect the upgrade will destroy all the existing data in the machine and my reset all the settings. There is also the risk that it could destroy the machine if power goes out at the wrong time in the upgrade so make sure its plugged into a UPS or battery that is fully charged. So if you happen to find a card, let me know, I'm up for experimentation.

_________________
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Resmeds overpriced SpO2

latinlover
Posts: 14
Joined: Sat Feb 04, 2012 6:53 pm

Re: Resmed S9 latest firmware 905

Post by latinlover » Sun May 06, 2012 3:22 pm

Thank you. If I find the firmware, I will let you know.

_________________
Humidifier

pinball

Re: Resmed S9 latest firmware 905

Post by pinball » Tue May 08, 2012 12:46 pm

I have a 3 month old S9-VPAP-auto which firmware version is 903, I am trying to upgrade to 905. I ask ResMed support, they're saying I have to get a new machine if you want to get a new firmware version 905. Has anyone has experience of upgrading firmware on a ResMed S9 machine?

User avatar
billbolton
Posts: 2266
Joined: Wed Jun 07, 2006 7:46 pm
Location: Sydney, Australia

Re: Resmed S9 latest firmware 905

Post by billbolton » Tue May 08, 2012 7:37 pm

pinball wrote:they're saying I have to get a new machine if you want to get a new firmware version 905.
Since it is a regulated therapeutic device, not piece of consumer entertainment (etc) electronics,that's a totally anticipatable response

Cheers,

Bill

_________________
MachineMask
Additional Comments: Airmini, Medistrom Pilot 24, CMS 60C Pulse Oximeter, ResScan 6

User avatar
Goofproof
Posts: 16087
Joined: Mon Dec 05, 2005 3:16 pm
Location: Central Indiana, USA

Re: Resmed S9 latest firmware 905

Post by Goofproof » Tue May 08, 2012 7:49 pm

billbolton wrote:
pinball wrote:they're saying I have to get a new machine if you want to get a new firmware version 905.
Since it is a regulated therapeutic device, not piece of consumer entertainment (etc) electronics,that's a totally anticipatable response

Cheers,

Bill
Maybe he's been better off buying a mp3 player to play with, and toast. Jim
Use data to optimize your xPAP treatment!

"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire

StevenXXXX
Posts: 165
Joined: Tue Jan 04, 2011 4:22 pm

Re: Resmed S9 latest firmware 905

Post by StevenXXXX » Wed May 09, 2012 8:04 am

pinball wrote:I have a 3 month old S9-VPAP-auto which firmware version is 903, I am trying to upgrade to 905. I ask ResMed support, they're saying I have to get a new machine if you want to get a new firmware version 905. Has anyone has experience of upgrading firmware on a ResMed S9 machine?
When I got a new S9 AutoSet in late December 2011 with the Version 0602, I demanded that it be exchanged for a more current one when I found out that the newer Version 0903 was out.

The DME provider was told by ResMed that he had to send my machine back to them & they would change the "board" with the newer Version 0903 on it.
Apparently even ResMed cannot or will not just "flash" the upgrade.

I opted instead to get a new machine. By this time it was late January 2012.

At that time ResMed told me & the DME provider that 0903 was the latest Version.
However, based on the timing of when people reported having gotten S9 AutoSets with the Version 0904 & then 0905, I suspect ResMed just flat out lied (more than one person on more than one occassion).

However, since the date of manufacture of the replaced machine was much closer to my original purchase date than the date of manufacture of the 1st machine I was given, I relented & did not pursue it any further.

Edited to add: Does anyone know wheter the newer Versions 0904 & 0905 were specific to a specific coutntry ? countries?

_________________
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: ResMed ResScan Software Version 3.16 Do NOT use either Ramp or EPR

User avatar
chunkyfrog
Posts: 34548
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nowhere special--this year in particular.

Re: Resmed S9 latest firmware 905

Post by chunkyfrog » Wed May 09, 2012 9:29 am

Do the upgrades actually represent enhanced programming, bug fixes, or what?
This is ResMed, after all. Can we expect good from them?
Edit: Specifically, will newer firmware still run on Sleepyhead?

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

StevenXXXX
Posts: 165
Joined: Tue Jan 04, 2011 4:22 pm

Re: Resmed S9 latest firmware 905

Post by StevenXXXX » Wed May 09, 2012 12:18 pm

chunkyfrog wrote:Do the upgrades actually represent enhanced programming, bug fixes, or what?
IMHO, all of the above.
But, since what exactly is changed or added is such a guarded secret, no one knows for sure.

I have been told (but have been unable to independently verify this) that the Version 0904 was a major revision. 0905 came soon thereafter & not that much of a change.
Edit: Specifically, will newer firmware still run on Sleepyhead?
I don't use Sleepyhead, so I can't even attempt to guess.

_________________
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: ResMed ResScan Software Version 3.16 Do NOT use either Ramp or EPR

jaybee72
Posts: 155
Joined: Fri Aug 31, 2007 6:06 pm
Location: Atlanta area

Re: Resmed S9 latest firmware 905

Post by jaybee72 » Wed May 09, 2012 12:27 pm

The S9 Auto I got new this week is 905. SH works fine with it...

_________________
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Haven't used humidifier in at least 5 years! On the hose since Sept 2007 with less than 10 missed nights

-tim
Posts: 710
Joined: Sat Dec 03, 2011 7:46 pm
Location: Melbourne Australia

Re: Resmed S9 latest firmware 905

Post by -tim » Thu May 10, 2012 5:59 am

StevenXXXX wrote:
pinball wrote:I have a 3 month old S9-VPAP-auto which firmware version is 903, I am trying to upgrade to 905. I ask ResMed support, they're saying I have to get a new machine if you want to get a new firmware version 905. Has anyone has experience of upgrading firmware on a ResMed S9 machine?
Apparently even ResMed cannot or will not just "flash" the upgrade.
I know one DME who has flashed them in the past.

Edited to add: Does anyone know wheter the newer Versions 0904 & 0905 were specific to a specific coutntry ? countries?
Thats a good question.

_________________
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Resmeds overpriced SpO2

alir
Posts: 1
Joined: Wed May 22, 2013 7:04 am

Re: Resmed S9 latest firmware 905

Post by alir » Wed May 22, 2013 7:30 am

Everybody is good, I am in Beijing in China, I need S9 AUTOSET firmware 0907 or 0905 version, if you have please send me email: vpap@qq.com, I thank you very much, you get to Beijing, I ask you to drink!

User avatar
StuUnderPressure
Posts: 1378
Joined: Mon Jun 18, 2012 10:34 am
Location: USA

Re: Resmed S9 latest firmware 905

Post by StuUnderPressure » Wed May 22, 2013 8:26 am

alir wrote:Everybody is good, I am in Beijing in China, I need S9 AUTOSET firmware 0907 or 0905 version, if you have please send me email: vpap@qq.com, I thank you very much, you get to Beijing, I ask you to drink!
Have you seen a Resmed S9 AutoSet with the Version 0907 internal software?

If yes, could you please post a picture of the screen showing that Version.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02

SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html

User avatar
STL Mark
Posts: 950
Joined: Thu May 06, 2010 1:37 pm
Location: St. Louis, MO - USA

Re: Resmed S9 latest firmware 905

Post by STL Mark » Wed May 22, 2013 9:10 am

I've sold two with that level. They were 2313x serial numbers from Singapore.
(Click image for high Rez)

Image

The very first models with the 0602 firmware had a problem called "data skew". After that, I have seen no issues.

Image

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Machine: S9 VPAP Adapt (eASV) 36037

Mode: ASVAuto, Min EPAP: 4, Max EPAP: 15, Min PS: 3, Max PS: 15, Ramp: Off - Original Titration: 18

User avatar
StuUnderPressure
Posts: 1378
Joined: Mon Jun 18, 2012 10:34 am
Location: USA

Re: Resmed S9 latest firmware 905

Post by StuUnderPressure » Wed May 22, 2013 10:16 am

Thanks, that is great information.

Do you have any idea what the manufacture dates were of the 1st machines to have the 0907 Version in them?

Formatting the SD card at least every 2 weeks was a way to keep the "skew" from growing.

Since I format my SD card every week after I download the data to ResScan, I never had a problem with "skew". But, I have the 0903 Version, so I assume I would not have a "skew" problem anyway.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02

SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html