Don't have CSR column in Event Flags graph???

Gabe · Post by **Gabe** » Fri Feb 10, 2012 12:42 pm

Can anyone tell me why CSR does not have a column in my Event Flags graph? I noticed that several that posted their graphs had it.Thanks.

JohnBFisher · Post by **JohnBFisher** » Fri Feb 10, 2012 2:24 pm

Gabe wrote:Can anyone tell me why CSR does not have a column in my Event Flags graph? I noticed that several that posted their graphs had it.Thanks.

There could be several reasons. Your machine might not identify PB/CSR. Your software might not identify it. And you might not have had any events that were flagged as CSR (Cheyne Stokes Respiration). In fact it's a good thing that you don't have this issue.

archangle · Post by **archangle** » Fri Feb 10, 2012 2:57 pm

JohnBFisher wrote:
Gabe wrote:Can anyone tell me why CSR does not have a column in my Event Flags graph? I noticed that several that posted their graphs had it.Thanks.
There could be several reasons. Your machine might not identify PB/CSR. Your software might not identify it. And you might not have had any events that were flagged as CSR (Cheyne Stokes Respiration). In fact it's a good thing that you don't have this issue.

The PRS1 Auto does score PB, at least in the firmware version I have.

Gabe, what software are you using? I think SleepyHead may not display a row for it if you don't have any.

Gabe · Post by **Gabe** » Fri Feb 10, 2012 3:57 pm

I had a PB/CSR of 0.74 last night on Sleepyhead. I have the data on the left, but not on the graph. It looked like Puggseys graphs were from Sleepyhead and had the extra line with CSR. Thanks Fisher and Archangle. I appreciate your input.

BTW, it shows the CSR line in the graph on the tutorial for Sleepyhead.

Pugsy · Post by **Pugsy** » Fri Feb 10, 2012 10:17 pm

PB/CSR in SleepyHead only shows as a little green colored bar on the top graph on the right if there happened to be an episode of Periodic Breathing. No episodes...there won't be anything showing on the graph.

If the Colored bars on the left show a % of time in PB...there should be green marked PB noted in the event graph.
Are you sure that you have the very top of the graph showing? I remember you had an issue with desktop resolution when we were trying Encore and you couldn't see some choices on the bottom because of the desktop resolution. They were off screen. This might be what is happening with the PB green mark. It is at the very top of the graph and it might be off screen due to your screen resolution.

Gabe · Post by **Gabe** » Sat Feb 11, 2012 10:51 am

I get the green on the bottom when I get onto Sleepyhead. The reason I didn't see the green on the bottom when I first put my SD card in, is because it was fast and I missed it. I now get it everytime I go into Sleepyhead. The last bar on the graph is PB. It is fully enclosed with the other data. I think that the enclosure would be broken if a line was missing. Thanks, Brenda. I did get a 0.74% PB/CSR reading, so I would think it should show up in the graph. Should I re-install Sleepyhead?

Pugsy · Post by **Pugsy** » Sat Feb 11, 2012 11:12 am

Can you post an image of the report that shows % of PB in your stats data on the left middle data area but no green mark for the PB in the event flags top graph? Is the missing green area for PB happening on all reports with a % of PB or just one single night?
If it is happening for all nights that have a % of PB showing..then you might reinstall SleepyHead.
If it is happening for just a single night....might just be a messed up file.

The green PB line in the graph will extend down to the flow graph line..
See my screen shot.

Pugsy · Post by **Pugsy** » Sat Feb 11, 2012 11:14 am

BTW you are using the lastest Beta version of SleepyHead aren't you?

Gabe · Post by **Gabe** » Sat Feb 11, 2012 11:54 am

I have the same graph as you have with the green extending to the flow rate. But the other day, you showed a graph the had PB on one line and a separate line for CSR. I have the Beta version. I thought I saw a separate line in the tutorial.

Pugsy · Post by **Pugsy** » Sat Feb 11, 2012 2:10 pm

Gabe wrote:But the other day, you showed a graph the had PB on one line and a separate line for CSR. I have the Beta version. I thought I saw a separate line in the tutorial.

I zoomed in on the PB section of the event graph. That is how I got the separate PB graph.
You can do the same by going to the Events tab (under the colored bars on the left) then clicking in the PB event line....then clicking on the PB scored event (it will have the time next to it) then your flow graph will zoom in on that particular PB flow pattern up close to see a longer PB green line.

The separate CSR line...was a separate image that I pulled off the internet to show what CSR looks like.
This one... it is just an example...from the internet...you won't see it in your SleepyHead reports.

Gabe · Post by **Gabe** » Sat Feb 11, 2012 2:22 pm

Thanks for the information, Brenda. I appreciate it. I tried it and it worked like you said.

Don't have CSR column in Event Flags graph???

Don't have CSR column in Event Flags graph???

Re: Don't have CSR column in Event Flags graph???

Re: Don't have CSR column in Event Flags graph???

Re: Don't have CSR column in Event Flags graph???

Re: Don't have CSR column in Event Flags graph???

Re: Don't have CSR column in Event Flags graph???

Re: Don't have CSR column in Event Flags graph???

Re: Don't have CSR column in Event Flags graph???

Re: Don't have CSR column in Event Flags graph???

Re: Don't have CSR column in Event Flags graph???

Re: Don't have CSR column in Event Flags graph???