This topic seems to be not active from about a year.
I bought ACR38U-SPC-R from a local dealer, and I downloaded ResScan 3.7, I cut a holder to fit I could not make it work after trials of many things here. I have followings;
- My compter is a desktop computer which Windows XP SP3 (32bit) loaded.
- It does not have any wireless network installed (as default where no wireless device attached ever)
- The device LED responds to the card when inserted (a long green, then turning to flashing after about 5-6 seconds.
- ResScan worked but unable to load data. It does not recognize the card readers wih following cases.
- I first installed dealers driver first, it was CCID USB Driver 1.1.6.4 -> Does not work, uninstalled
- I read this forum and after reading I believed that I have to get rid of the "CCID" thing from the driver.
- Tried to install driver provided with ResScan -> Windows does not recognize any drivers, it is searching "CCID drivers" by the wizard.
- Downloaded 1.1.2.0 from ACS Site (MSI installation), the installed version is still CCID USB Driver -> Does not work, uninstalled (using /X option)
- I have googled for ARC38 driver version 1.1.6.1 (as mentioned 1.1.6.4 is a CCID driver), but no evident sign for the 1.1.6.1, just an X64 version of it.
- Finally I decided to write a comment here since I decided that I need more help.
Question for the ResMed SmartCard Hackers
Re: Question for the ResMed SmartCard Hackers
You need to buy the PC/SC version of the ACR38 card reader. The CCID version which you apparently have will not be recognized by ResScan. See this thread for more info, someone recently found a seller on ebay who is able to obtain the harder to find PC/SC version.bkyavas wrote:- Finally I decided to write a comment here since I decided that I need more help.
viewtopic.php?f=1&t=47816&st=0&sk=t&sd= ... C&start=90
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Re: Question for the ResMed SmartCard Hackers
I bought a Targus High SpeedSD/SDHCMMC MIcro SD /T-F card reader/Writer. It costs $8.00 and I found it at Walmart and have been using it for close to a month. It works great. The card just slides in perfectly and fits exactly.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: Set to Apap 14.00/20. EPR 3, Climate line hose, Oscar for Mac 1.1.0. Betta.1 |
Last edited by Bobby269 on Sun Feb 20, 2011 5:19 pm, edited 2 times in total.
- billbolton
- Posts: 2264
- Joined: Wed Jun 07, 2006 7:46 pm
- Location: Sydney, Australia
Re: Question for the ResMed SmartCard Hackers
This discussion is about card readers for S8 ResScan cards (smartcards) not about the S9 SD cards.Bobby269 wrote:I bought a Targus High SpeedSD/SDHCMMC MIcro SD /T-F card reader/Writer.
Cheers,
Bill
Re: Question for the ResMed SmartCard Hackers
Hi all.. I asked this very question a while back and am still confused about it..LOL. I am wondering if this card reader would work with my machine as well? I know that I would have to make the guide for the card to fit properly..right? Thanks SO Much!!! Terri
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Severe Complex Sleep Apnea New Life Elite Oxygen Concentrator~Pressures 17/30..Contect CMS50F Pulse Oximeter |
TmjTerri
Severe Complex Sleep Apnea
ResMed Vpap Adapt S9 #36007
ResMed H5i Heated Humidifier
NewLife 5 Oxygen Concentrator
Respironics CPAP Nasal Mask with Headgear ComfortGel Blue Size Petite
Pressures 17/30
CMS50F Pulse Oximeter Recordable
Severe Complex Sleep Apnea
ResMed Vpap Adapt S9 #36007
ResMed H5i Heated Humidifier
NewLife 5 Oxygen Concentrator
Respironics CPAP Nasal Mask with Headgear ComfortGel Blue Size Petite
Pressures 17/30
CMS50F Pulse Oximeter Recordable