Pad A Cheek forehead pad and nose bridge pad

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
prefer2breathe
Posts: 64
Joined: Sat Sep 11, 2010 8:16 pm
Location: Minneapolis/St. Paul

Pad A Cheek forehead pad and nose bridge pad

Post by prefer2breathe » Fri Sep 24, 2010 5:00 pm

I was just wondering if any of you have the Pad A Cheek forehead and nose bridge pad combo? I was wondering if the nose bridge protector caused air leaks above your nose? I was also wondering about just getting the forehead pad. I am thinking about ordering either one of these but wanted to see if any of you have preferences of one over the other.

_________________
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Resscan 3.14, Backup S8 AutoSet II for travel. APAP 10.4 - 15, EPR 2. Cpap hose lift system.

User avatar
Kevin in Atlanta
Posts: 8
Joined: Sat Sep 11, 2010 11:37 am

Re: Pad A Cheek forehead pad and nose bridge pad

Post by Kevin in Atlanta » Fri Sep 24, 2010 5:08 pm

I use both. Love it. No leaks and my quattro mask is much more comfortable.
CPAP User since July 2007. Average AHI 1.7 (Formerly Organplayer on this forum)

User avatar
jdm2857
Posts: 2982
Joined: Wed Aug 20, 2008 8:29 pm
Location: South Jersey

Re: Pad A Cheek forehead pad and nose bridge pad

Post by jdm2857 » Fri Sep 24, 2010 6:07 pm

Karen, (username PADACHEEK), is a member of the forum.

If you send her a PM, I'm sure she'll answer any questions you may have. She's very accommodating.
jeff

smith
Posts: 24
Joined: Sun Sep 19, 2010 4:30 pm
Location: Thousand Oaks Ca.

Re: Pad A Cheek forehead pad and nose bridge pad

Post by smith » Fri Sep 24, 2010 6:11 pm

I have the Mirage Quattro and what I do is use corn cushion and stick them up inside around the area that gets affected by my nose. Its not perfect but has helped.

It always cool though rolling into work with strap marks and a bright red nose !

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: NO software yet
Sleepy Smith

User avatar
OutaSync
Posts: 2048
Joined: Sun Sep 23, 2007 8:49 am
Location: Virginia

Re: Pad A Cheek forehead pad and nose bridge pad

Post by OutaSync » Fri Sep 24, 2010 6:23 pm

I've been using the nose bridge protector for over a year, I really can't remember how much longer. It didn't cause leaks, but I still had leaks around the rest of the mask. Now I'm trialing the padacheek liner. It covers the forehead piece and comes down to cover the whole mask area. I think I'm going to like this even more than just the nose protector.

Bev
Diagnosed 9/4/07
Sleep Study Titrated to 19 cm H2O
Rotating between Activa and Softgel
11/2/07 RemStar M Series Auto with AFlex 14-17
10/17/08 BiPAP Auto SV 13/13-23, BPM Auto, AHI avg <1

User avatar
prefer2breathe
Posts: 64
Joined: Sat Sep 11, 2010 8:16 pm
Location: Minneapolis/St. Paul

Re: Pad A Cheek forehead pad and nose bridge pad

Post by prefer2breathe » Fri Sep 24, 2010 6:30 pm

jdm2857 wrote:Karen, (username PADACHEEK), is a member of the forum.

If you send her a PM, I'm sure she'll answer any questions you may have. She's very accommodating.
Oh, cool! Thanks.

_________________
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Resscan 3.14, Backup S8 AutoSet II for travel. APAP 10.4 - 15, EPR 2. Cpap hose lift system.

User avatar
prefer2breathe
Posts: 64
Joined: Sat Sep 11, 2010 8:16 pm
Location: Minneapolis/St. Paul

Re: Pad A Cheek forehead pad and nose bridge pad

Post by prefer2breathe » Fri Sep 24, 2010 6:42 pm

I have a Mirage Softtgel nasal mask and I get terrible imprints on my forehead. I adjust my top straps pretty loose but the bottom of the pads leave an indentation. Why does resmed have a design on the forehead rests anyway?? I have gone to work with these cute little designs with what looks like two chicken pox, one on each side of my forehead. It must be really eye catching because everyone at work asks me whats the deal with my forehead?? I also have a scar on the bridge of my nose thats trying to heal up from a few months ago. I finally got smart and now put a band aid on the bridge of my nose. My nose had developed a callous and its taking its sweet time healing. I'm only 35 and my face looks like a mess!

_________________
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Resscan 3.14, Backup S8 AutoSet II for travel. APAP 10.4 - 15, EPR 2. Cpap hose lift system.

User avatar
LoQ
Posts: 1475
Joined: Sun Apr 06, 2008 1:59 pm
Location: America

Re: Pad A Cheek forehead pad and nose bridge pad

Post by LoQ » Fri Sep 24, 2010 6:49 pm

prefer2breathe wrote:I have a Mirage Softtgel nasal mask and I get terrible imprints on my forehead. I adjust my top straps pretty loose but the bottom of the pads leave an indentation. Why does resmed have a design on the forehead rests anyway?? I have gone to work with these cute little designs with what looks like two chicken pox, one on each side of my forehead. It must be really eye catching because everyone at work asks me whats the deal with my forehead?? I also have a scar on the bridge of my nose thats trying to heal up from a few months ago. I finally got smart and now put a band aid on the bridge of my nose. My nose had developed a callous and its taking its sweet time healing. I'm only 35 and my face looks like a mess!
Isn't there a dial adjustment on the forehead piece? You may want to experiment with that.

I've said this before, I use a cosmetic buff pad that I wrap with a tissue. I place a pair of these under the forehead pads. There is never a mark under these contraptions, and they are very comfortable.

User avatar
prefer2breathe
Posts: 64
Joined: Sat Sep 11, 2010 8:16 pm
Location: Minneapolis/St. Paul

Re: Pad A Cheek forehead pad and nose bridge pad

Post by prefer2breathe » Fri Sep 24, 2010 7:00 pm

LoQ wrote:
prefer2breathe wrote:I have a Mirage Softtgel nasal mask and I get terrible imprints on my forehead. I adjust my top straps pretty loose but the bottom of the pads leave an indentation. Why does resmed have a design on the forehead rests anyway?? I have gone to work with these cute little designs with what looks like two chicken pox, one on each side of my forehead. It must be really eye catching because everyone at work asks me whats the deal with my forehead?? I also have a scar on the bridge of my nose thats trying to heal up from a few months ago. I finally got smart and now put a band aid on the bridge of my nose. My nose had developed a callous and its taking its sweet time healing. I'm only 35 and my face looks like a mess!
Isn't there a dial adjustment on the forehead piece? You may want to experiment with that.

I've said this before, I use a cosmetic buff pad that I wrap with a tissue. I place a pair of these under the forehead pads. There is never a mark under these contraptions, and they are very comfortable.
I have tried adjusting the dial and found that 12 is the best for me. Any less and the bridge of my nose really hurts. Any more and I have air going in my eyes. I actually just placed an order from Padacheek and will see if this does the trick. Thanks for your suggestion on the cosmetic buff pad and tissue. If this thing doesn't pan out, I'll have to try your idea. I just thought that the less I have to fiddle around before bed the better and figured the PAC requires no extra effort on my part.

_________________
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Resscan 3.14, Backup S8 AutoSet II for travel. APAP 10.4 - 15, EPR 2. Cpap hose lift system.

FerrisWheel

Re: Pad A Cheek forehead pad and nose bridge pad

Post by FerrisWheel » Fri Feb 18, 2011 8:25 pm

prefer2breathe wrote:
LoQ wrote:
prefer2breathe wrote:I have a Mirage Softtgel nasal mask and I get terrible imprints on my forehead. I adjust my top straps pretty loose but the bottom of the pads leave an indentation. Why does resmed have a design on the forehead rests anyway?? I have gone to work with these cute little designs with what looks like two chicken pox, one on each side of my forehead. It must be really eye catching because everyone at work asks me whats the deal with my forehead?? I also have a scar on the bridge of my nose thats trying to heal up from a few months ago. I finally got smart and now put a band aid on the bridge of my nose. My nose had developed a callous and its taking its sweet time healing. I'm only 35 and my face looks like a mess!
Isn't there a dial adjustment on the forehead piece? You may want to experiment with that.

I've said this before, I use a cosmetic buff pad that I wrap with a tissue. I place a pair of these under the forehead pads. There is never a mark under these contraptions, and they are very comfortable.
I have tried adjusting the dial and found that 12 is the best for me. Any less and the bridge of my nose really hurts. Any more and I have air going in my eyes. I actually just placed an order from Padacheek and will see if this does the trick. Thanks for your suggestion on the cosmetic buff pad and tissue. If this thing doesn't pan out, I'll have to try your idea. I just thought that the less I have to fiddle around before bed the better and figured the PAC requires no extra effort on my part.

Hi,

How did the Padacheek pan out? I have a Mirage Quattro and the forehead piece is really getting to me.

Ciao,
Ferris

User avatar
bayourest
Posts: 389
Joined: Wed Dec 01, 2010 9:16 am
Location: Connecticut

Re: Pad A Cheek forehead pad and nose bridge pad

Post by bayourest » Sat Feb 19, 2011 8:00 am

i had a lot of nose bridge soreness problems when I started (in Nov.) I got a gel pad nose protector from the DME. That helped. Then I got a padacheek mask liner and have never used the nose pad again. the liner makes it all so much more comfortable. just be sure not to cut the hole too big when you enlarge it (see directions with liner)

User avatar
prefer2breathe
Posts: 64
Joined: Sat Sep 11, 2010 8:16 pm
Location: Minneapolis/St. Paul

Re: Pad A Cheek forehead pad and nose bridge pad

Post by prefer2breathe » Sat Feb 19, 2011 8:44 am

FerrisWheel wrote:

Hi,

How did the Padacheek pan out? I have a Mirage Quattro and the forehead piece is really getting to me.

Ciao,
Ferris
I personally didn't care for the nose bridge protector. I was getting leaks on my nosebridge from it. So what I did, was cut that part off and just use the forehead pad. I love the forehead pad!! It works great and no more imprints on my forehead. For my nose, I found those little bandaide dots to put on. They're just the small little square ones. Our walmart doesn't carry them but either Walgreens or Target carries them. These are the best I found for my nose bridge.

_________________
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Resscan 3.14, Backup S8 AutoSet II for travel. APAP 10.4 - 15, EPR 2. Cpap hose lift system.

User avatar
Bobby269
Posts: 803
Joined: Sat Nov 27, 2010 11:12 am
Location: San Antonio Texas

Re: Pad A Cheek forehead pad and nose bridge pad

Post by Bobby269 » Sat Feb 19, 2011 11:53 am

I have been using the Padacheek forehead bridge with the nose piece for my Mirage Quatro ff mask. After one day the marks on my forehead were lighter and after 3 days they were gone. I use the single layer for the nose bridge and it gave me the same results.
It took a little adjusting but I have a flat line on my leak chart. It's a very good product.

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: Set to Apap 14.00/20. EPR 3, Climate line hose, Oscar for Mac 1.1.0. Betta.1