ResScan Stats help

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Golden-Alpine
Posts: 18
Joined: Thu May 06, 2010 3:20 am

ResScan Stats help

Post by Golden-Alpine » Wed Jun 02, 2010 5:21 am

Hi,

I am trying to read my stats using ResScan 3.1 stats.

Last night I had the following stats: Apnea index: 3.3, Obstructive 0.1 Central 3.2 Hypopnea index: 0.0 AHI 3.3

What are the different events?

Looking on the Detailed Graphs tab and reading the Events I had quite a few Central Events. There are numbers in the pink boxes are they the seconds the events lasted?
Machine: S9 CPAP Machine
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Humidifier: S9™ Series Humidaire H5i™ Heated Humidifier with Climate Control
Additional Comments: Rescan 3.10, pressure set to 11.

User avatar
sleepmba
Posts: 197
Joined: Fri Jul 18, 2008 12:31 am
Location: Florida
Contact:

Re: ResScan Stats help

Post by sleepmba » Wed Jun 02, 2010 10:40 pm

I'm not sure about the pink boxes, but your stat's look good to me. I'd call that a successful titration in my lab.

However, if you still feel tired and unrefreshed after a couple of weeks or perhaps sooner, you may need to make a change somewhere like: humidification level, mask, or even pressure. Alot of IF's AND's or BUT's here.
For commentary from a 10 year Sleep Technologist visit my blog at: Recent Topics: Picture of the new baby/ Switching to Swift FX
http://www.sleepandcpap.blogspot.com
http://www.cpapmaskreview.blogspot.com
http://www.facebook.com/sleepandcpap

User avatar
oscar98
Posts: 274
Joined: Fri Apr 16, 2010 1:49 pm
Location: TN - USA

Re: ResScan Stats help

Post by oscar98 » Wed Jun 02, 2010 11:48 pm

Yep, the numbers in the pink boxes are the seconds that the event lasted.

How are you feeling? Technically you are under the threshold of an AHI of 5 and that is really good but for me anything above 1 and I feel terrible. Everyone is different.

User avatar
Golden-Alpine
Posts: 18
Joined: Thu May 06, 2010 3:20 am

Re: ResScan Stats help

Post by Golden-Alpine » Thu Jun 03, 2010 3:45 am

I have been feeling a lot less tired then before CPAP thats for sure.

I just wanted to understand what the differences are between the different events.
Machine: S9 CPAP Machine
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Humidifier: S9™ Series Humidaire H5i™ Heated Humidifier with Climate Control
Additional Comments: Rescan 3.10, pressure set to 11.

User avatar
bdp522
Posts: 3378
Joined: Tue Jun 27, 2006 5:13 pm

Re: ResScan Stats help

Post by bdp522 » Thu Jun 03, 2010 5:29 am

obstructive is where the airway closes because something, like the tongue, gets in the way and blocks the air.
central is when the brain doesn't send the signal to breathe
hypopnea is a wannabe apnea, a partial blockage or decrease in air flow
apnea index is the average per hour of all apnea events, obstructive and central
AHI is the average per hour of all events, obstructive and central and hypopnea

Brenda

_________________
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Love my papillow, Aussie heated hose and PAD-A-CHEEKS! Also use Optilife, UMFF(with PADACHEEK gasket), and Headrest masks Pressure; 10.5

User avatar
Nord
Posts: 565
Joined: Sun Mar 07, 2010 4:30 pm
Location: GTA Canada

Re: ResScan Stats help

Post by Nord » Thu Jun 03, 2010 6:50 am

Just to add to the info...

You have lots of data to study and understand...

Obstructive Apnea Index = great
Hypopnea Index = great
Central Apnea Index = most of what you see so it is something to watch.

You need to get 2 to 3 weeks of data to get a pattern and see if that is what the trend is...
Centrals can be triggered by any number of things including leaks which you don't mention...
Did you see your Sleep Study report on "Titration" ??

It's a great start.
Nord

User avatar
Golden-Alpine
Posts: 18
Joined: Thu May 06, 2010 3:20 am

Re: ResScan Stats help

Post by Golden-Alpine » Fri Jun 04, 2010 6:55 pm

The report from my titration said: The patient had an in lab autoset titration. A 95th percentile CPAP pressure of 9.6 cm H2O with a maximum pressure of 10.6 cm H20 resulted in good control of OSA. There were a few central events at the start and towards the end of the study but oxygen saturation remained well maintained.

Looking at my reports since 23rd April my AHI has been pretty good, the majority under 5.0. Probably the average is 3.0.

My main issue does seem to be with the Central Apnea's. Is there anything that can be done to reduce them knowing its a brain signal issue.
Machine: S9 CPAP Machine
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Humidifier: S9™ Series Humidaire H5i™ Heated Humidifier with Climate Control
Additional Comments: Rescan 3.10, pressure set to 11.

User avatar
sleepmba
Posts: 197
Joined: Fri Jul 18, 2008 12:31 am
Location: Florida
Contact:

Re: ResScan Stats help

Post by sleepmba » Fri Jun 04, 2010 8:05 pm

Central apneas are normal to a certain extent. From my experience performing sleep studies and titrations, I'd say the normal range would be 5 to 10 per night (not hour). Central apneas normally occur in transitions from wake to sleep or vice versa on occasion.

Logically, during your sleep study, you were falling asleep at the beginning showing a concentration of centrals. If you were dosing and waking up or even restless, this will make for a higher number. In the end of your study, you may have been waking up or uncomfortable or sick of the wires making you stir and drift back off to sleep causing transitional centrals.

However, there are certain health conditions and/or medications that may cause centrals too. You doctor will probably be the best judge as to what category you fall into.
For commentary from a 10 year Sleep Technologist visit my blog at: Recent Topics: Picture of the new baby/ Switching to Swift FX
http://www.sleepandcpap.blogspot.com
http://www.cpapmaskreview.blogspot.com
http://www.facebook.com/sleepandcpap