M-Series CPAP Programming

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
rkknz
Posts: 3
Joined: Wed Nov 18, 2009 2:35 pm

M-Series CPAP Programming

Post by rkknz » Wed Nov 25, 2009 1:10 pm

Can anyone out there tell me how to program (setup) a Respironic's M-Series machine? I want to tweak the present settings and don't know to access the setup code. I programmed my former RemStar w/C-Flex for years and wish to continue with the recently aquired M-Series machine. Please someone help me. I'm using an M-Series Plus with A-Flex machine w/heated humidifier and A Resmed Swift LT mask.

RKK
Top
User avatar
Watts
Posts: 31
Joined: Thu Jul 16, 2009 8:45 am
Location: Elmira, NY

Re: M-Series CPAP Programming

Post by Watts » Wed Nov 25, 2009 1:19 pm

I don't have my machine handy but you hold down the upper right and left button simultaineously while plugging in the power cord. Wait till you hear two beeps and your in.
Top
User avatar
DoriC
Posts: 5214
Joined: Sat Sep 13, 2008 9:28 pm
Location: NJ

Re: M-Series CPAP Programming

Post by DoriC » Wed Nov 25, 2009 4:28 pm

I don't think the Plus comes with AFlex, it's only offered with an auto.
"Do or Do Not-There Is No Try"-"Yoda"
"We are what we repeatedly do,so excellence
is not an act but a habit"-"Aristotle"
DEAR HUBBY BEGAN CPAP 9/2/08
Top
flylow
Posts: 136
Joined: Tue Jul 24, 2007 7:15 pm
Location: New Jersey

Re: M-Series CPAP Programming

Post by flylow » Wed Nov 25, 2009 4:52 pm

the plus does not have detailed data. What is your basis for tweaking without that information. Kind of like flying in the clouds with no gyro instruments.
Top
JZ
Posts: 360
Joined: Mon Feb 05, 2007 9:25 pm
Location: Texas

Re: M-Series CPAP Programming

Post by JZ » Wed Nov 25, 2009 11:20 pm

Web site with clinician manual information:

http://www.apneaboard.com/CPAP%20Adjustment.htm
Top
rkknz
Posts: 3
Joined: Wed Nov 18, 2009 2:35 pm

Re: M-Series CPAP Programming

Post by rkknz » Thu Nov 26, 2009 8:31 am

flylow wrote:the plus does not have detailed data. What is your basis for tweaking without that information. Kind of like flying in the clouds with no gyro instruments.
My error, I have a Remstar Auto M with A-Flex and thank you for your interest and comment. rkk
Top
rkknz
Posts: 3
Joined: Wed Nov 18, 2009 2:35 pm

Re: M-Series CPAP Programming

Post by rkknz » Thu Nov 26, 2009 9:40 am

rkknz wrote:Can anyone out there tell me how to program (setup) a Respironic's M-Series machine? I want to tweak the present settings and don't know to access the setup code. I programmed my former RemStar w/C-Flex for years and wish to continue with the recently aquired M-Series machine. Please someone help me. I'm using an M-Series Plus with A-Flex machine w/heated humidifier and A Resmed Swift LT mask.

RKK
My machine is a Remstar Auto M with A-Flex, I listed it as as an M Series Plus by mistake. Thank you all for your help, it was greatly appreciated. rkk
Top


Return to “CPAP and Sleep Apnea Message Board”