How to Remove EncorePro?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
plr66
Posts: 1339
Joined: Sun Sep 07, 2008 6:33 pm

How to Remove EncorePro?

Post by plr66 » Sun Apr 12, 2009 11:30 am

Can sometone tell me how to remove EncorePro MSSQL Server from my startup tray? I have gone into Add/Remove Programs and taken out EncoreViewer and the EV Drivers...don't see anything else immediately related to the Encore programs there, but it is still running in the tray.
DeVilbiss IntelliPap Std Plus with Smartflex; Transcend miniCPAP & Everest2 w/humidifier & batt for travel. UltraMirage FFM; PadACheeks; PaPillow. Using straight CPAP at 13.0/passover humidifier. AHI consistently < 1.5. Began CPAP 9/4/08.

User avatar
Wulfman
Posts: 12317
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Re: How to Remove EncorePro?

Post by Wulfman » Sun Apr 12, 2009 11:41 am

plr66 wrote:Can sometone tell me how to remove EncorePro MSSQL Server from my startup tray? I have gone into Add/Remove Programs and taken out EncoreViewer and the EV Drivers...don't see anything else immediately related to the Encore programs there, but it is still running in the tray.
Is this XP?
If it's in the "Programs\Startup", you could right-click on it and drag it out to the Desktop and "move" it there. From the very beginning, I've always pulled those programs (and every other one) out of the Startup group so I can start them when I want them to run. I have separate icons on my desktop for the SQL Server, Service Manager, Infineer Reader Utility and Encore Pro programs......and that's the order I start them up. I shut them down in reverse order and stop the Service Manager before doing an Exit on that program. Then, I reboot my computer so I know the SQL Server isn't running

Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

User avatar
DreamDiver
Posts: 3082
Joined: Thu Oct 04, 2007 11:19 am

Re: How to Remove EncorePro?

Post by DreamDiver » Sun Apr 12, 2009 11:48 am

plr66 wrote:Can sometone tell me how to remove EncorePro MSSQL Server from my startup tray? I have gone into Add/Remove Programs and taken out EncoreViewer and the EV Drivers...don't see anything else immediately related to the Encore programs there, but it is still running in the tray.
MSSQL is actually part of Windows. It can be installed or uninstalled. If you have other programs that are using MSSQL, you may not want to uninstall it. Instead, you could just stop it from running and starting up automatically.

Here's what I would:
A. Double click on the icon in the systray. This will bring up the 'SQL Service Manager'.
B. Uncheck 'Auto-start service when OS starts.
C. Click 'Stop'. This will stop the service and stop it from starting up automatically when you reboot.
D. Close the SQL Service Manager.
E. Right click the item on the systray and click 'Exit'.
F. Check your startup menu from the Windows start menu. If you see the SQL Service Manager icon there, you could delete it or put it in another part of the menu (not the startup menu) so you can access it at your discretion for other programs that might be using it.

This way, your data is available later if you want to access it manually or view it with James Skinner's Encore Pro Analyzer some time in the future. Just turn MSSQL on again, and turn on the EPA, and you're ready to compare data from your old machine with your new machine.

_________________
Mask: ResMed AirFit™ F20 Mask with Headgear + 2 Replacement Cushions
Additional Comments: Pressure: APAP 10.4 | 11.8 | Also Quattro FX FF, Simplus FF

User avatar
plr66
Posts: 1339
Joined: Sun Sep 07, 2008 6:33 pm

Re: How to Remove EncorePro?

Post by plr66 » Sun Apr 12, 2009 11:55 am

Wulfman wrote: Is this XP?
If it's in the "Programs\Startup", you could right-click on it and drag it out to the Desktop and "move" it there. Den
I do have XP, Den, and am unable to right-click-and-drag anything in my tray out to the Desktop. I just get a popup menu. Clicking "Exit" on this menu of course is just a temporary removal of the icon from the tray. I went to my Start button and cannot locate this gizmo there either.
Last edited by plr66 on Sun Apr 12, 2009 12:16 pm, edited 1 time in total.
DeVilbiss IntelliPap Std Plus with Smartflex; Transcend miniCPAP & Everest2 w/humidifier & batt for travel. UltraMirage FFM; PadACheeks; PaPillow. Using straight CPAP at 13.0/passover humidifier. AHI consistently < 1.5. Began CPAP 9/4/08.

User avatar
Wulfman
Posts: 12317
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Re: How to Remove EncorePro?

Post by Wulfman » Sun Apr 12, 2009 12:10 pm

Additionally, in the Control Panel/Administrative Tools/Services I have all of the "services" that begin with "MSSQL" and "SQL" set to "Manual". That way they don't start up when the computer is started......only when I want them to.


Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

User avatar
plr66
Posts: 1339
Joined: Sun Sep 07, 2008 6:33 pm

Re: How to Remove EncorePro?

Post by plr66 » Sun Apr 12, 2009 12:56 pm

Okay, Den, I just figured out that your first post meant to R-click on the Start/Programs/Startup icon to move it to Desktop. I confused that and thought you meant to move it from the systray. Thanks. I'm a little leary of doing this, however, since I will undoubtedly forget what the heck the thing is on my Desktop in another 6 months, and delete it.

Thanks also to DD--I went ahead with the first part of your instructions, and sure nuf had initially missed that little box to check in the SQL service manager. I rebooted to be sure, and it is remaining on "Stopped" mode. But I just don't get why the darned icon in the systray (which is labeled "EncorePro MSSQL server") does not go away permanently now that I have removed the EncorePro program and drivers via my Control Panel.
DeVilbiss IntelliPap Std Plus with Smartflex; Transcend miniCPAP & Everest2 w/humidifier & batt for travel. UltraMirage FFM; PadACheeks; PaPillow. Using straight CPAP at 13.0/passover humidifier. AHI consistently < 1.5. Began CPAP 9/4/08.

User avatar
Wulfman
Posts: 12317
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Re: How to Remove EncorePro?

Post by Wulfman » Sun Apr 12, 2009 2:02 pm

plr66 wrote:Okay, Den, I just figured out that your first post meant to R-click on the Start/Programs/Startup icon to move it to Desktop. I confused that and thought you meant to move it from the systray. Thanks. I'm a little leary of doing this, however, since I will undoubtedly forget what the heck the thing is on my Desktop in another 6 months, and delete it.

Thanks also to DD--I went ahead with the first part of your instructions, and sure nuf had initially missed that little box to check in the SQL service manager. I rebooted to be sure, and it is remaining on "Stopped" mode. But I just don't get why the darned icon in the systray (which is labeled "EncorePro MSSQL server") does not go away permanently now that I have removed the EncorePro program and drivers via my Control Panel.
Well, I meant to go into the Startup and right-click on the programs that are in there (like SQL-related and Service Manager) and drag (move) them to the desktop. That way they shouldn't be in there and auto-starting when XP starts. By going into the Administrative Tools/Services in the Control Panel, you can also control whether those programs auto-start of will be manually started.

Also, have you rebooted your computer during all this?

Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

User avatar
plr66
Posts: 1339
Joined: Sun Sep 07, 2008 6:33 pm

Re: How to Remove EncorePro?

Post by plr66 » Sun Apr 12, 2009 2:15 pm

plr66 wrote:Okay, Den, I just figured out that your first post meant to R-click on the Start/Programs/Startup icon to move it to Desktop.....

....I rebooted to be sure, and it is remaining on "Stopped" mode. But I just don't get why the darned icon in the systray (which is labeled "EncorePro MSSQL server") does not go away permanently now that I have removed the EncorePro program and drivers via my Control Panel..
Wulfman wrote:Well, I meant to go into the Startup and right-click on the programs that are in there (like SQL-related and Service Manager) and drag (move) them to the desktop. That way they shouldn't be in there and auto-starting when XP starts. By going into the Administrative Tools/Services in the Control Panel, you can also control whether those programs auto-start of will be manually started.

Also, have you rebooted your computer during all this?
Den
Boy I sure don't seem to be communicating computer-stuff very well today! Den, I gotcha. I meant to say that I figured out what you re-stated here. Just reluctant to move that to Desktop. I did check the Administrative Tools/Services in the Control Panel, and all were already set to "manual."

So why won't the icon go away in the systray?
DeVilbiss IntelliPap Std Plus with Smartflex; Transcend miniCPAP & Everest2 w/humidifier & batt for travel. UltraMirage FFM; PadACheeks; PaPillow. Using straight CPAP at 13.0/passover humidifier. AHI consistently < 1.5. Began CPAP 9/4/08.

User avatar
Wulfman
Posts: 12317
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Re: How to Remove EncorePro?

Post by Wulfman » Sun Apr 12, 2009 2:17 pm

I dunno.

Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

User avatar
Goofproof
Posts: 16087
Joined: Mon Dec 05, 2005 3:16 pm
Location: Central Indiana, USA

Re: How to Remove EncorePro?

Post by Goofproof » Sun Apr 12, 2009 9:07 pm

The icon is thew server manager, you have to right click on it and exit it. but you also need to go into the startmenu in windows and remove it from startup. Also you probably have many places trying to restart it and other removed programs. Lots of pieces are left behind after add/remove gets done. I use Tuneup Utilities 2009, to clean out my reg files, it also provides a nice way to control programs that load at startup. You would be supprised at how that trash can slow down your computer. Jim
Use data to optimize your xPAP treatment!

"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire