Mirage Swift Questions

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
swtsassy65
Posts: 77
Joined: Mon Jul 25, 2005 4:40 pm
Location: Coon Rapids, Minnesota
Contact:

Mirage Swift Questions

Post by swtsassy65 » Mon Aug 22, 2005 5:45 pm

Hi. I am trying out my new swift tonight and have a few questions.
The strap that goes along your cheek and attaches to the unit. Should this be flat on your cheek or is it normal to have a small gap on part of it?
Also any advice?/ Would be apprecated.
Thanks


Guest

Post by Guest » Mon Aug 22, 2005 6:56 pm

Should lay flat but because of different face sizes and shapes I can see you may have a gap if your face is thin and not round. I have a round face and it is flat the whole way down. Just make sure the strap is centered between your eyes and ears on each side.
Good luck, I love the mask.. except it leaves marks on my face because I lay on my side. Let me know how you make out.

Steve

Mr Tired
Posts: 11
Joined: Thu Jul 07, 2005 8:09 am

Post by Mr Tired » Mon Aug 22, 2005 7:24 pm

Make sure you use the proper sized nasel things to fit your nose. You should have received three sizes in the case. Also the holes in the pillow should face away from you because air needs to exit continuously from those holes. You can also change the side of the mask that the hose attaches. I sleep on my right side so I like to have the hose attached on the left side. If you want to change it just pull the hose out & pull the plug on the other side & trade sides.
I have found that it helps to put the mask on while standing in front of the mirror. I can check to make sure the nasel pieces are in the proper position. It took me about a week to get used to sleeping with the machine. Just remember if you have any problems, research this web site & you may find the answer. Or just ask your questions & I am sure someone will have an answer. Sweet Dreams.


Mr Tired


snowloft
Posts: 31
Joined: Mon Aug 22, 2005 1:57 pm
Location: New Hampshire
Contact:

Tonight

Post by snowloft » Wed Aug 24, 2005 12:22 pm

The medical equipment technician brought my things today and demonstrated how to use everything. She recommended this nasal mask too, and said she never receives any complaints about it.

Tonight will be my very first night using CPAP.

Snowloft

User avatar
snork1
Posts: 888
Joined: Thu Apr 28, 2005 9:36 pm
Location: Kirkland WA

Re: Tonight

Post by snork1 » Wed Aug 24, 2005 1:37 pm

snowloft wrote:The medical equipment technician brought my things today and demonstrated how to use everything. She recommended this nasal mask too, and said she never receives any complaints about it....

_________________
well that shoots down the credibility of THAT tech!
I haven't heard of an interface yet that gets NO complaints.
And if there was one, we would ALL be using it 100%.

Note I use the Swift and Activa, and would say they work out better than anything else for me, but certainly leave room for improvement and future development of "better" interfaces.

Remember:
What you read above is only one data point based on one person's opinion.
I am not a doctor, nor do I even play one on TV.
Your mileage may vary.
Follow ANY advice or opinions at your own risk.
Not everything you read is true.

wb9tpg
Posts: 27
Joined: Fri Jul 15, 2005 2:39 pm
Location: Versailles, KY

Re: Tonight

Post by wb9tpg » Wed Aug 24, 2005 6:54 pm

snowloft wrote: Tonight will be my very first night using CPAP.
Good Luck - let us know how it went.

Gary

Janelle

Post by Janelle » Thu Aug 25, 2005 1:50 pm

If you position the hose the way the woman laying down in one of the ad photos does, with the elbow pointed away from the face and the hose going out from your face with the hose connected nearly or at the juncture of the headgear, you can sleep on either side without the hose being in your way. You do not need to switch the hose just to sleep on the other side. Even slight modifications of this position work as well. I've tried them.