Resmed Software?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
amosalonzo
Posts: 7
Joined: Fri Oct 31, 2008 8:16 am

Resmed Software?

Post by amosalonzo » Fri Oct 31, 2008 12:31 pm

I have been browsing the forums here looking for info about a card reader and software that will work with a Resmed VPAP Auto 25, and so far haven't found it.

Is the software that you guys refer to usable with a wide variety of machines, or must one buy reader/software from the manufacturer of their device?
Top
User avatar
txnative
Posts: 74
Joined: Wed Jul 30, 2008 4:37 pm
Location: Central Texas

Re: Resmed Software?

Post by txnative » Fri Oct 31, 2008 12:53 pm

The software is specific to the machine. AutoScan will work with some ResMed machines, but for the latest machines (S8 II series) you need the ResScan 3.4 or 3.5.
Also, ResScan 3.4 will not run on Vista, while 3.5 will run on both XP and Vista.
PB uses different software for the 420E than they use for the Sandman.
Once you settle on which machine you want, then look for the specific software that is used with that machine.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: ResScan 3.7 Software and ResLink. Also have PB 420E with software for travel.
Began CPAP on Jul 22, 2008. Split Night Study failed to get a good titration pressure. Titrated (2 week home APAP) at 10. Currently using APAP at 13-15. Not using Humidifier. Even with SA under control, still can't sleep all night!
Top
amosalonzo
Posts: 7
Joined: Fri Oct 31, 2008 8:16 am

Re: Resmed Software?

Post by amosalonzo » Fri Oct 31, 2008 10:36 pm

Where can I buy the ResScan 3.4 or 3.5 software and the card reader?
Top
User avatar
txnative
Posts: 74
Joined: Wed Jul 30, 2008 4:37 pm
Location: Central Texas

Re: Resmed Software?

Post by txnative » Sat Nov 01, 2008 7:42 am

amosalonzo wrote:Where can I buy the ResScan 3.4 or 3.5 software and the card reader?
Check your PM.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: ResScan 3.7 Software and ResLink. Also have PB 420E with software for travel.
Began CPAP on Jul 22, 2008. Split Night Study failed to get a good titration pressure. Titrated (2 week home APAP) at 10. Currently using APAP at 13-15. Not using Humidifier. Even with SA under control, still can't sleep all night!
Top
amosalonzo
Posts: 7
Joined: Fri Oct 31, 2008 8:16 am

Re: Resmed Software?

Post by amosalonzo » Sun Nov 02, 2008 10:32 am

Thank you very much.
Top


Return to “CPAP and Sleep Apnea Message Board”