APAP M Series/ nightly stats?

[AMANN]

Hello can anyone tell me if there is a way to check your average AHI and mask leak for the night, instead of the 7 day average?

Thanks,

[bap40]

This is an easy one to do.. unplug the power cord from the back of the machine. Lift the display window. Hold down the 2 buttons on the top of the screen and plug back in at the same time. You will hear 2 little beeps. When the screen shows it is unlocked you can get into the therapy mode or the set-up mode. When it shows the therapy screen hold down the minus button for about 5 secs and the screen will change back to 0 data. You can do this daily and have each days info. You can also change settings in the set-up mode if you desire.

Hope it doesn't sound too confusing. It is really simple to do.

[Wulfman]

==========Resetting LCD Display Data====================

To reset LCD Therapy data (does NOT erase any data from SmartCard):

1. Hold down the (<-) (->) buttons while plugging in the power on the back,
wait for 2 beeps or 5 seconds, release buttons.
2. Press the (->) key and navigate to Therapy screen.
3. Press and HOLD down the (-) minus key for 5 seconds and/or until therapy data is reset to Zero.
4. Press the (->) key to scroll back to main menu, press (+) key to enter Setup or
On/Off button to exit.

[AMANN]

Thanks I will try this, it does seem simple.

==========Resetting LCD Display Data====================

To reset LCD Therapy data (does NOT erase any data from SmartCard):

1. Hold down the (<-) (->) buttons while plugging in the power on the back,
wait for 2 beeps or 5 seconds, release buttons.
2. Press the (->) key and navigate to Therapy screen.
3. Press and HOLD down the (-) minus key for 5 seconds and/or until therapy data is reset to Zero.
4. Press the (->) key to scroll back to main menu, press (+) key to enter Setup or
On/Off button to exit.

[Hawthorne]

You might also purchase the software and reader. Costs a bit but well worth it!