General Discussion on any topic relating to CPAP and/or Sleep Apnea.
-
FoxNewsFan
- Posts: 223
- Joined: Thu Jun 19, 2008 2:31 pm
Post
by FoxNewsFan » Sat Aug 30, 2008 9:26 am
billbolton wrote:Remember that the ResScan card has to be inserted in to the ACR-38 reader with the with contacts facing up.
This is the opposite way up to which the card has to be inserted into the flow generator.
The reader is designed to take full sized Smartcards which have the contacts on their top surface (which is the "normal" orientation for a full size Smartcard).
Cheers,
Bill
Bill,
This is a great comment. To bad the computer gurus didn't make the card and reader so it would only fit in the correct way. I have now written READER on one side of the card and VPAP on the other. Thanks.
Ed
ResMed Airsense 10 Autoset APAP
ResMed Mirage Quattro FFM
Backup ResMed S9
-
Engransan
- Posts: 70
- Joined: Sat May 24, 2008 10:36 am
- Location: Southeast USA
Post
by Engransan » Sat Aug 30, 2008 9:35 am
Thanks Anne. Does your Rescan software on the desktop PC recognize the card reader without a data card plugged in? I was just thinking how amazing this is to have people from around the world helping one another.
Engransan
"OLD AGE AIN'T NO PLACE FOR SISSIES"
-
txnative
- Posts: 74
- Joined: Wed Jul 30, 2008 4:37 pm
- Location: Central Texas
Post
by txnative » Sat Aug 30, 2008 10:41 am
A question was asked earlier: "Is the ResScan 3.5 software compatible with XP? "
All I can say is I am running ResScan 3.5 on my WinXP computer. No problems.
Also, the computer sees the reader when plugged in without the data card.
However, ResScan only responds if there is a data card inserted.
Began CPAP on Jul 22, 2008. Split Night Study failed to get a good titration pressure. Titrated (2 week home APAP) at 10. Currently using APAP at 13-15. Not using Humidifier. Even with SA under control, still can't sleep all night!
-
billbolton
- Posts: 2264
- Joined: Wed Jun 07, 2006 7:46 pm
- Location: Sydney, Australia
Post
by billbolton » Sat Aug 30, 2008 8:05 pm
Engransan wrote:Does your Rescan software on the desktop PC recognize the card reader without a data card plugged in?
If reader is installed corrcetly but there is no card inserted in the reader, ResScan 3.5 displays.....
There are no devices available for downloading data
Connect a flow generator or data card and try again
Cheers,
Bill
_________________
| Machine | Mask | |
 |  |
| Additional Comments: Airmini, Medistrom Pilot 24, CMS 60C Pulse Oximeter, ResScan 6 |
-
bigk
- Posts: 608
- Joined: Tue Jan 22, 2008 5:35 pm
- Location: Central Coast near Sydney Australia
Post
by bigk » Sun Aug 31, 2008 8:16 pm
OK. If you have a wireless adaptor on your computer try disabling it. I couldn't get Resscan to work with the card reader either until I did that. There does seem to be an incompatibility (or a resource clash) with a wireless card and the Resscad card reader.
Disable it and it will probably work.
_________________
| Mask | Humidifier | |
 |  |
| Additional Comments: S9 Autoset, H5i, Resmed Swift FX, Resscan 3.10 |
Resmed AutoSet Spirit II flow generator (Backup)
Resmed H3i Humidifier
Swift FX
Mirage Swift LT Nasal Pillows
Activa Nasal Mask
Resscan Software with USB + Data Card
SPO 7500 Pulse-Ox
MedicMon Blood Pressure Monitor
Aussie Heated Hose
-
PaulyWally
- Posts: 18
- Joined: Sat Aug 23, 2008 7:09 am
- Location: Waterloo, Ontario, Canada
Post
by PaulyWally » Mon Sep 08, 2008 1:33 pm
pianomagoo wrote:
I just thought of something but don't know if it matters or not. Is the ResScan 3.5 software compatible with XP? I guess it is if you had no problem installing it.
Anne
ResScan 3.5 is definitely compatible with XP.
_________________
| Machine | Mask | |
 | |
