I got my second hand RemStar Pro 2 today!

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
dieselgal
Posts: 976
Joined: Thu Mar 08, 2007 4:08 pm

I got my second hand RemStar Pro 2 today!

Post by dieselgal » Tue May 22, 2007 5:38 pm

When I got home today I had the package on my porch and I got all excited. I purchased from someone online and I have to say I was worried about whether I would actually receive it as described. Anyway I am pretty happy with it. Seems to be in very good condition, and has the user's manual and extra filters. It does have the heated humidifier as well.
Of course I haven't used it yet with a mask but I did check to see if it actually came on and off. I intend to wait until this weekend and clean everything myself (because I purchased from someone I don't know) and I will probably set it up and try it this weekend.
NOW...for my questions.
Of course the users manual doesn't tell me how to change the pressure and I need to change it to my pressure. Can someone give me the details on how this is done in english? Also what is the best way to clean the humidifier. Should I use bleach, vinegar or what?
I paid 250.00 for the whole setup and he even included a couple of masks.
A swift and comfortlite 2 so i think I got a pretty good deal.
Thanks in advance for any help

Donna


_________________
Mask

User avatar
cpapernewbie
Posts: 685
Joined: Fri Oct 13, 2006 5:53 pm

Post by cpapernewbie » Tue May 22, 2007 6:43 pm

Donna

you can find setup doc for Remstar Plus in:
http://www.cpap-supply.com/cpap-machine ... 0Guide.pdf

Push the RAMP and Pressure ON/OFF button at the same

Probably Pro 2 setup buttons are the same


_________________
Machine: DreamStation Auto CPAP Machine
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Humidifier: DreamStation Heated Humidifier
Additional Comments: CPAP history: dumb tank, auto, PR M, PR System 1, PR BIPAP, PR System 1 model 60, Resmed S9, Resmed S10, Dreamstation

User avatar
Wulfman
Posts: 12317
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Post by Wulfman » Tue May 22, 2007 7:10 pm

Or....you can use these instructions. Copy them to a file on your computer.

Den


REMstar Pro 2 Setup

When in the Setup Menu, the humidifier ^ and ramp v buttons operate as up and down keys to change the settings, the left/right user buttons < > allow you to go to the previous/next question or setting, and the pressure start/stop button is used to exit the Setup Menu. Holding the humidifier or ramp buttons down will cause the values to change more quickly.

To enter the Therapy Setup Menu, hold the two top user buttons < > down while plugging in the power cord.
Continue holding the buttons down until the REMstar Pro 2 with C-Flex beeps twice.

Note: The word "setup" will appear on all of the screens indicating that you are in the Therapy Setup Menu.
If you press the Pressure start/stop button, you will exit the Setup Menu.

a. Compliance hours/nights: (recommend leaving alone, but CAN be cleared at this point)
Select next setting with >

b. Therapy mode: (CPAP or CFLE) select with ^ or v
Select next setting with >

c. CPAP or CFLE pressure setting: Select with ^ or v
Select next setting with >

d. C-Flex mode (if you chose CFLE mode): Select setting 1, 2 or 3 with ^
Select next setting with >

e: Ramp time setting: Select with ^ or v
(ramp time will be turned off with a setting of 0)
Select next setting with >

f. Ramp pressure setting: Select with ^ or v
Select next setting with >

g. Patient disconnect setting: 1 = on 0 = off Select with ^ or v
Select next setting with >

h. Buttons lights setting: 1 = on 0 = off Select with ^ or v

(Last setting. Use On/Off button to exit Setup)

(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

User avatar
dieselgal
Posts: 976
Joined: Thu Mar 08, 2007 4:08 pm

Post by dieselgal » Tue May 22, 2007 9:04 pm

Thank you both, I can't wait to try this thing out this weekend. What about the best way to clean the humidifier.


_________________
Mask

Guest

Post by Guest » Tue May 22, 2007 9:26 pm

Donna....where did you find it?...PM me if you don't want to make it public....thanks...track.

User avatar
cpapernewbie
Posts: 685
Joined: Fri Oct 13, 2006 5:53 pm

Post by cpapernewbie » Tue May 22, 2007 9:55 pm

hi Guest:

Check your local Craigslist, I just found out lightly used Remstars for $100 and BIPAP for 500

DieselGal

Tillymarigold is the expert on cleaning
If I remember correctly, use 3 part water and 1 part white vinegar and keep this for 15 minutes or so

I use tap tap water and wash weekly using the above solution


_________________
Machine: DreamStation Auto CPAP Machine
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Humidifier: DreamStation Heated Humidifier
Additional Comments: CPAP history: dumb tank, auto, PR M, PR System 1, PR BIPAP, PR System 1 model 60, Resmed S9, Resmed S10, Dreamstation

User avatar
dieselgal
Posts: 976
Joined: Thu Mar 08, 2007 4:08 pm

Post by dieselgal » Wed May 23, 2007 2:03 pm

Anonymous wrote:Donna....where did you find it?...PM me if you don't want to make it public....thanks...track.
I found mine on Yahoo auctions and since it had the humidifier with it I decided to go for it. I felt a little leary about sending that kind of money to a stranger but I took my chances and it worked out. I also paid using paypal and American Express and hoped that if I got shafted I could raise some stink. Fortunately that didn't happen. I can't wait to get it all hooked up and use it this weekend and see which machine I like the best.

PS. Remember yahoo auctions will be going away in mid June so if you are looking there you better be quick.

_________________

CPAPopedia Keywords Contained In This Post (Click For Definition): humidifier


_________________
Mask