Encore Pro analyzer question

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
jskinner
Posts: 1475
Joined: Sat Aug 26, 2006 9:21 pm
Location: Greenwich, Nova Scotia, Canada
Contact:

Post by jskinner » Sat Apr 14, 2007 2:16 pm

SelfSeeker wrote:Does Encore Pro 1.6.22 work with Vista?
No.
SelfSeeker wrote:Does the current EPA work on Vista?
Yes.
SelfSeeker wrote:Are the upgrades/revision of Encore Pro 1.7 or 1.8 available to people who currently have earlier versions?
Not for free.


SelfSeeker
Posts: 779
Joined: Tue Sep 19, 2006 6:25 pm

Post by SelfSeeker » Sat Apr 14, 2007 3:14 pm

James thank you for you quick responses.

They are greatly appreciated.

How are you feeling by the way. Since I see you posting, I am assuming better then before. I hope you are on the road to recovery.
I can do this, I will do this.

My disclaimer: I'm not a doctor, nor have I ever worked in the health care field Just my personal opinions.

User avatar
jskinner
Posts: 1475
Joined: Sat Aug 26, 2006 9:21 pm
Location: Greenwich, Nova Scotia, Canada
Contact:

Post by jskinner » Sat Apr 14, 2007 4:46 pm

SelfSeeker wrote:How are you feeling by the way. Since I see you posting, I am assuming better then before. I hope you are on the road to recovery.
Still not feeling great. I've stopped using CPAP the last week or so at least my nasal passages aren't getting flared up even more every night. Of course now the untreated apnea is making me very tired. I've moved out of my condo and am living at a friends place temporarily. I'm planning to head to NS to stay with my parent until my surgery in May. At least that way I don't have to deal with the day to day tasks as much when I'm not feeling well.


User avatar
Snoredog
Posts: 6399
Joined: Sun Mar 19, 2006 5:09 pm

Post by Snoredog » Sat Apr 14, 2007 6:43 pm

jskinner wrote:
SelfSeeker wrote:How are you feeling by the way. Since I see you posting, I am assuming better then before. I hope you are on the road to recovery.
Still not feeling great. I've stopped using CPAP the last week or so at least my nasal passages aren't getting flared up even more every night. Of course now the untreated apnea is making me very tired. I've moved out of my condo and am living at a friends place temporarily. I'm planning to head to NS to stay with my parent until my surgery in May. At least that way I don't have to deal with the day to day tasks as much when I'm not feeling well.
someday science will catch up to what I'm saying...

SelfSeeker
Posts: 779
Joined: Tue Sep 19, 2006 6:25 pm

Post by SelfSeeker » Sat Apr 14, 2007 7:09 pm

James,

I wish you the best for a speedy recovery from the surgery and whatever else has taken hold.

I hope you get lots of rest before surgery.

Keep us posted. Sending you good vibes. When is your surgery?

jskinner wrote:
SelfSeeker wrote:How are you feeling by the way. Since I see you posting, I am assuming better then before. I hope you are on the road to recovery.
Still not feeling great. I've stopped using CPAP the last week or so at least my nasal passages aren't getting flared up even more every night. Of course now the untreated apnea is making me very tired. I've moved out of my condo and am living at a friends place temporarily. I'm planning to head to NS to stay with my parent until my surgery in May. At least that way I don't have to deal with the day to day tasks as much when I'm not feeling well.
I can do this, I will do this.

My disclaimer: I'm not a doctor, nor have I ever worked in the health care field Just my personal opinions.

User avatar
jskinner
Posts: 1475
Joined: Sat Aug 26, 2006 9:21 pm
Location: Greenwich, Nova Scotia, Canada
Contact:

Post by jskinner » Sun Apr 15, 2007 8:17 am

SelfSeeker wrote:When is your surgery?
May 10th

wolftracker
Posts: 315
Joined: Sun May 14, 2006 8:20 am

Still looking

Post by wolftracker » Sat Apr 21, 2007 7:17 am

Hi,

Still looking to see if anyone has vista working with EPA on encore 1.8

I know EPA works with vista on earlier versions of encore.

But has anyone been able to get it to work on 1.8

i have laptop, vista, encore pro 1.8 and no EPA ???

miss looking at my charts. and appear to be having some problems
with pressure



wolf


Snorkel
Posts: 74
Joined: Tue Apr 24, 2007 8:17 pm
Location: PNW

Post by Snorkel » Sat May 19, 2007 4:24 pm

I just requested EPA from James, and then noticed he's dealing with some personal issues, therefore don't expect a response from him for a while. Therefore, thought I'd post some points here.

I have Vista running along with Encore 1.8 with no problems. Running in admin mode, and it works fine.

Is there a place to download EPA from besides James' site - since he is recuperating? I'd be happy to try to run it on the Vista/Encore 1.8 combo. I work at MS so might be able to help - I'm not an engineer, however, so promising nothing.

I do know Vista shipped w/ .net 2.0, and there is a chance EPA was written in 1.x, and there are a few routines/calls that existed in 1.x that do not in 2.0, which could cause problems.

thanks
David

User avatar
jskinner
Posts: 1475
Joined: Sat Aug 26, 2006 9:21 pm
Location: Greenwich, Nova Scotia, Canada
Contact:

Post by jskinner » Sat May 19, 2007 4:46 pm

Snorkel wrote:I have Vista running along with Encore 1.8 with no problems. Running in admin mode, and it works fine.


I have EPA working with Vista and 1.8 as well now. The trick for now is to set EPA to run as with admin privilages. I'll have to come up with a better solution long term.
Snorkel wrote:Is there a place to download EPA from besides James' site - since he is recuperating?
I've recently automated the download process so it will work with out my intervention now. This should speed up the process given that I'm not online as much as I normally would be...
Snorkel wrote:I do know Vista shipped w/ .net 2.0, and there is a chance EPA was written in 1.x, and there are a few routines/calls that existed in 1.x that do not in 2.0,
EPA automatically downloads the version of .NET that it needs if its not already installed.

Cheers, -James

Snorkel
Posts: 74
Joined: Tue Apr 24, 2007 8:17 pm
Location: PNW

Post by Snorkel » Tue May 22, 2007 1:39 am

jskinner wrote:
Snorkel wrote:Is there a place to download EPA from besides James' site - since he is recuperating?
I've recently automated the download process so it will work with out my intervention now. This should speed up the process given that I'm not online as much as I normally would be...

I;'ve tried the new download request process w/ four different email addys - from corpnet, to hack1, semi hack, and down hack, and no response the any of them. checked spam filters too.

Any other way/Mirror site?

David

User avatar
blarg
Posts: 1407
Joined: Mon Dec 11, 2006 10:21 pm
Location: Sydney, Australia

Post by blarg » Tue May 22, 2007 2:23 am

http://james.istop.com/EncoreProAnalyzer/

He prefers people register. If you're having a problem with it send him a PM on the board and I'm sure he'll get to you quickly.
Last edited by blarg on Tue May 22, 2007 11:10 pm, edited 1 time in total.
I'm a programmer Jim, not a doctor!

vigna
Posts: 9
Joined: Mon May 15, 2006 4:57 am

how to run EPA with admin privileges

Post by vigna » Tue May 22, 2007 8:14 am

iam planning to upgrade to vista. ihave encorepro 1.8. can someone kindly post how to run encore pro analyzer with admin privileges. so far i have not upgraded to vista mainly as i cannot imagine not using epa. once again three cheers to jskinner and best wishes for his speedy recovery
vigna


User avatar
jskinner
Posts: 1475
Joined: Sat Aug 26, 2006 9:21 pm
Location: Greenwich, Nova Scotia, Canada
Contact:

Re: how to run EPA with admin privileges

Post by jskinner » Tue May 22, 2007 3:24 pm

vigna wrote:iam planning to upgrade to vista. ihave encorepro 1.8. can someone kindly post how to run encore pro analyzer with admin privileges. so far i have not upgraded to vista mainly as i cannot imagine not using epa.
1. Right click on the icon for EPA (not the shortcut but the actual program)
2. Goto the Compatibility tab
3. Under Privilege level, check 'Run this program as an administrator'


vigna
Posts: 9
Joined: Mon May 15, 2006 4:57 am

Post by vigna » Tue May 22, 2007 11:20 pm

when i right click and go to properties i dont see compatibility tab. will i see this only in vista perhaps as i have not installed te vista upgrade yet

User avatar
blarg
Posts: 1407
Joined: Mon Dec 11, 2006 10:21 pm
Location: Sydney, Australia

Post by blarg » Wed May 23, 2007 1:15 am

vigna wrote:when i right click and go to properties i dont see compatibility tab. will i see this only in vista perhaps as i have not installed te vista upgrade yet
Yes, you'll only see that tab in Vista. You'll need to install that update first, and then follow the steps James provided.
I'm a programmer Jim, not a doctor!