AirBreak resmed S10 Airsense Elite to S10 autoset Hello all forum members, please help me

[rowareza]

I would like someone to help me with explanations on how to put a Resmed S10 Airsense AUTOSET software and hardware on a Resmed airsense 10 ELITE, I have an ST-Link/V2 STM32 programmer and a TC2050-IDC-NL cable, I made a dump, but I didn't succeed and I already broke a Resmed Elite s10 that only starts, I have a few more Resmed elite devices, but no autoset, so I can do more tests, Thanks in advance to anyone who has the opportunity to help me. Thanks in advance

[LSAT]

The Elite is a fixed pressure machine. It cannot be set to Autoset mode.

[Dog Slobber]

The Elite is a fixed pressure machine. It cannot be set to Autoset mode.

He's not asking how to simply set an Elite to Auto. He's asking how to firmware upgrade a ResMed Elite, effectively turning it into an AutoSet.

Because, all the Air10 devices are the same hardware, this can be done using a technique called AirBreak. Which is not trivial, nor supported.

I would like someone to help me with explanations on how to put a Resmed S10 Airsense AUTOSET software and hardware on a Resmed airsense 10 ELITE

This really isn't a practical request.

You're effectively asking somebody to take the content of https://airbreak.dev/ and rewrite it, in simple terms for you.

There are somethings that fit in the category of; if you have to ask how, you shouldn't be doing it.

There has never been much support for airbreaking on the two CPAP forums. Your best bet is to search reddit

[Dog Slobber]

My name is CEZAR and I am from Bucharest, Romania, my country is very poor, just one example... a pensioner has a 300 euro pension per month and this device is not covered by the state, the mask costs a lot, the hose costs a lot, the water tank the same, the device the same, but you already know that, probably in Canada things are different.... and here in Romania we try to solve some problems alone. My mother is 82 years old and she needs this device, she needs the Autoset S10, not another model, but I only have 7 Elite S10 devices that have 22,000 operating hours and someone from England who found them at a scrapyard sent them to me, I found a new motor for $15 on a Chinese site for a resmed 10 autoset. Do you think I don't know that it is not ethical and moral to ask something like this? Do you think I don't know that RESMED has invested a lot of money in these software? What I know is that the hardware of the devices is identical, I found out extremely much about apnea in 6 months, and I will find out more in the future, only that I do not know how to program, I am a beginner but also damn stubborn, I bought a stm 32 programmer and a cable and I have to be patient, there are many things that I do not know, but I hope to find out if someone will be kind.... When you have money or insurance pays you everything is simple, when you do not have money and you are desperate, ethics and morals no longer have a place, I hope with God's help I can solve what I set out to do, even if ethics is illegal, he will forgive me at the last judgment...Now I see that the cpaptalk have banned my IP, I probably bothered , but I entered with TOR Browser and I only managed to see 2 messages from the person in front, and your message that calls for advanced ethics and morals, thank you for the response and for your time... I wish you a pleasant day

The guy responded to me via PM, with the above rant.

And as predicted, he simply doesn't have the capacity to AirBreak a ResMed.

Of course, the impracticably of his request was completely lost on him, and he completely misunderstood my statement:
"if you have to ask how, you shouldn't be doing it."

He interpreted it as a a commentary on the ethics of AirBreaking, when the only reasonable interpretation is, a commentary on his potential ability.

I have no idea if his IP was banned because of his post, but should anyone want to "work" with him. Read his rant and then decide if you want to brick more devices with him.

[rowareza]

My name is CEZAR and I am from Bucharest, Romania, my country is very poor, just one example... a pensioner has a 300 euro pension per month and this device is not covered by the state, the mask costs a lot, the hose costs a lot, the water tank the same, the device the same, but you already know that, probably in Canada things are different.... and here in Romania we try to solve some problems alone. My mother is 82 years old and she needs this device, she needs the Autoset S10, not another model, but I only have 7 Elite S10 devices that have 22,000 operating hours and someone from England who found them at a scrapyard sent them to me, I found a new motor for $15 on a Chinese site for a resmed 10 autoset. Do you think I don't know that it is not ethical and moral to ask something like this? Do you think I don't know that RESMED has invested a lot of money in these software? What I know is that the hardware of the devices is identical, I found out extremely much about apnea in 6 months, and I will find out more in the future, only that I do not know how to program, I am a beginner but also damn stubborn, I bought a stm 32 programmer and a cable and I have to be patient, there are many things that I do not know, but I hope to find out if someone will be kind.... When you have money or insurance pays you everything is simple, when you do not have money and you are desperate, ethics and morals no longer have a place, I hope with God's help I can solve what I set out to do, even if ethics is illegal, he will forgive me at the last judgment...Now I see that the cpaptalk have banned my IP, I probably bothered , but I entered with TOR Browser and I only managed to see 2 messages from the person in front, and your message that calls for advanced ethics and morals, thank you for the response and for your time... I wish you a pleasant day

The guy responded to me via PM, with the above rant.

And as predicted, he simply doesn't have the capacity to AirBreak a ResMed.

Of course, the impracticably of his request was completely lost on him, and he completely misunderstood my statement:
"if you have to ask how, you shouldn't be doing it."

He interpreted it as a a commentary on the ethics of AirBreaking, when the only reasonable interpretation is, a commentary on his potential ability.

I have no idea if his IP was banned because of his post, but should anyone want to "work" with him. Read his rant and then decide if you want to brick more devices with him.

This is the last time I enter this forum, I found out everything I was interested in on Reddit, now I have the firmware from the Resmed Airsense 10 Auto set and 5 or 6 firmware from ASV, I managed to Jailbreak, so any Resmed s10, elite, autoset device can be transformed into ASV or any model you want, the procedure is simple, you only need a cable and a programmer, I found exceptional people on Reddit who helped me succeed on the first try, this account was banned on my IP, only through torbrowser I managed to enter my account, probably this forum is sponsored by RESMED, and then I understand why I was banned, I am happy now, if there are others from really poor countries, let them have good hope

[Pugsy]

this account was banned on my IP, only through torbrowser I managed to enter my account, probably this forum is sponsored by RESMED, and then I understand why I was banned,

Wrong on both accounts.
ResMed has absolutely nothing to do with this forum and your account IP address was never banned here.
Now it might have been a victim of the unknown IP address banning but it was never banned because of your request here.
See this thread...you aren't alone.
viewtopic/t189303/Mysterious-banning-fo ... again.html
and you aren't alone in having to use a different IP addy.

Good luck to you and I am glad you found what you needed to do what you wanted to do.

Have a nice day.

[ozij]

For anyone else looking for instructions, look at who pointed the OP to Reddit.

There has never been much support for airbreaking on the two CPAP forums. Your best bet is to search reddit

(says ozij, using a vpn because something called Imperva say it banned her IP address)