Hello, I'm a "veteran" of a whole 2 months of CPAP use; started off looking at lots of YouTube videos, also ended up at the SleepHQ site, but didn't care for the 'Paid" model. Even so, after a disastrous first day, (almost threw the machine in the trash!), I got into the "clinical" settings menu and started tweaking things, allowing me (thankfully) to start to live with it.
I look at the Resmed "My Air" results every morning, it's kinda "basic" but better than nothing, But looking at the OSCAR results is a whole 'nother level! Very confusing (so far), will need to get some "hand-holding" to learn how to read it.
But, what prompted me to join here today and make my first post is something that has me very concerned, specifically regarding CA events.
When I was looking at the comprehensive SleepHQ results during the "trial" period, I first noticed a large number of CA events (very few Apneas, more Hypopneas) and wondered if using a CPAP machine was effective for CA events, considering they're "brain" triggered, not airway obstructions. AND, if I have FEW apneas, then using a CPAP machine might not be the best thing!
My initial AHI result from the "Home" sleep study was 25. Now, using the machine, I've had a few sub 5 event nights, but they've sorta been all over the place between 5 and 10, with a couple spiking up to 13 events.
But here's the strange one (to me, anyway):
Last night, I was awakened at 3 a.m. (wife had set an alarm wrong), she went right back to sleep, but I spent the next half hour unable to fall back asleep, till I took the mask off and shut the machine off.
When I first awoke, I checked the screen and it said 5 "events" for the previous 3 hours - That's an hourly "average", correct? . But then, after not falling asleep at all for the next half hour, I looked at the screen and it said 9 events!
How did I accumulate 4 more "events" if I wasn't even asleep??? And looking later at the OSCAR data, it said that during that same half hour period, there were 17 CA events! (Again, not even asleep during that time)
I've been under the impression that the machine only senses (and reports) Apneas/events during SLEEP, so I'm a bit confused.
If anyone has any thoughts on this, I'd appreciate hearing them.
Lastly, if anyone is able to help me decipher all the OSCAR data so far, I'd appreciate that as well. I just need to be pointed to a help page to explain how to upload and post the results.
Regards, Larry
Newbie-almost 2 months along, managing ok, (sorta), but CA questions.
Re: Newbie-almost 2 months along, managing ok, (sorta), but CA questions.
These machines can NOT even tell if you are asleep or awake. They have zero way to know if anything it flags is awake/arousal related or sleep related. Where did you get the idea the machine could tell if you were asleep or not?
See this thread.
viewtopic.php?f=1&t=187767&p=1451526#p1451526
The machine can only measure air flow (your breathing) and the normal irregular breathing can and will confuse the machine into issuing a flag on some irregular breathing. The machine is easily fooled....I do it fairly regularly when I am bored.LBGEE wrote: ↑Mon Jul 14, 2025 2:49 pmWhen I first awoke, I checked the screen and it said 5 "events" for the previous 3 hours - That's an hourly "average", correct? . But then, after not falling asleep at all for the next half hour, I looked at the screen and it said 9 events!
How did I accumulate 4 more "events" if I wasn't even asleep???
See all these CAs/centrals??? I was playing around holding my breath just to see what happened. I NEVER went to sleep until after that second and larger cluster of centrals you see. I had a visit from the insomnia monster that night. None of them were real and they don't matter at all except that I had some trouble falling asleep.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Newbie-almost 2 months along, managing ok, (sorta), but CA questions.
Hello, and thank you for your reply, I appreciate your comments.
To answer your question:
Key features
Detects sleep onset. AutoRamp™ with sleep onset detection starts by delivering low pressure for greater comfort. Then, after detecting that you’ve fallen asleep, it gradually increases the pressure to the prescribed level.
https://shop.resmed.com.au/products/air ... 8549450050
To answer your question:
I got that "idea" from Resmed, where it shows information regarding the machine I'm using (Airset 10 Autoset), as copied below:Where did you get the idea the machine could tell if you were asleep or not?
Key features
Detects sleep onset. AutoRamp™ with sleep onset detection starts by delivering low pressure for greater comfort. Then, after detecting that you’ve fallen asleep, it gradually increases the pressure to the prescribed level.
https://shop.resmed.com.au/products/air ... 8549450050
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: DreamWear Nasal CPAP Mask with Headgear |
Re: Newbie-almost 2 months along, managing ok, (sorta), but CA questions.
LBGEE wrote: ↑Tue Jul 15, 2025 11:30 amI got that "idea" from Resmed, where it shows information regarding the machine I'm using (Airset 10 Autoset), as copied below:
Key features
Detects sleep onset. AutoRamp™ with sleep onset detection starts by delivering low pressure for greater comfort. Then, after detecting that you’ve fallen asleep, it gradually increases the pressure to the prescribed level.
https://shop.resmed.com.au/products/air ... 8549450050
Ahh...I was wondering if you had stumbled across autoramp promises.
Find me where ResMed says that if it flags a central apnea then you MUST be asleep and never makes mistakes.
Once autoramp is out of the picture (either after the 30 minutes or the machine thinks you are asleep" then we have to rely on the regular auto adjusting and flagging algorithms.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Newbie-almost 2 months along, managing ok, (sorta), but CA questions.
Ok, Thank you.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: DreamWear Nasal CPAP Mask with Headgear |
Re: Newbie-almost 2 months along, managing ok, (sorta), but CA questions.
Here is the OSCAR report for the night I had what seemed like a lot of CA events when I was awake, from approx. 3 to 3 a.m. at which point I took off the mask.
And below it is the following night, where I had an unusually long usage of the CPAP, due to only getting about 4 hours sleep the night before. It seems like they show that I have very few OA events as well.
Any comments on the data would be appreciated. Thank you.
And below it is the following night, where I had an unusually long usage of the CPAP, due to only getting about 4 hours sleep the night before. It seems like they show that I have very few OA events as well.
Any comments on the data would be appreciated. Thank you.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: DreamWear Nasal CPAP Mask with Headgear |
- Attachments
-
- Screenshot 2025-07-16 082825.jpg (642.1 KiB) Viewed 299 times
-
- Screenshot 2025-07-16 084759.png (131.43 KiB) Viewed 299 times
Re: Newbie-almost 2 months along, managing ok, (sorta), but CA questions.
I'll second the point that the machine has no idea whether you're awake or asleep: it's a CPAP, not an EEG. All it can do is guess, based on your breathing. Mine is a cheaper one, that doesn't even try.
But I'm clueless about CA-flagged events. I can generate an "apnea" with every breath for as long as I feel like, but I've never seen a single "clear airway" event. I can stop breathing for the ten-seconds-plus that it takes to count as an "apnea", keeping my mouth open the whole time (or anything else I feel like trying), and it never says "clear airway".
But I'm clueless about CA-flagged events. I can generate an "apnea" with every breath for as long as I feel like, but I've never seen a single "clear airway" event. I can stop breathing for the ten-seconds-plus that it takes to count as an "apnea", keeping my mouth open the whole time (or anything else I feel like trying), and it never says "clear airway".
_________________
Mask: ResMed AirTouch™ F20 Mask with Headgear + 2 Replacement Cushions Bundle |
Additional Comments: I don't see Resvent ibreeze on the list. Its data isn't compatible with OSCAR, so I use its imatrix software. |