So I got a Delta 2 from Ecoflow. I also got a 220w bifacial solar panel.
Because the solar was coming in today, I wanted to run the battery down a bit last night. I decided to see how the cpap would perform on it and plugged in to the regular AC jack.
A little under 2 hours later I woke up to the whole thing turned off. I didn’t think to check to see if there were any warning, lights or anything on the front because it was dark and I just wanted to go back to sleep. So I plugged it into the wall and caught a few hours. I got up around 6 AM and decided to plug it back into the wall, but basically didn’t really fall back to sleep at that point while it was running.
I called ecoflow today to ask about this and she was escalating the issue. She mentioned it could be a warranty issue.
I’m just wondering though if it’s possible that it causes it to tripped circuit breaker inside or something like that.
Could the whole 12v/24v nature of the AS11 be creating a conflict on the machine?
And if so, wasn’t there talk of an alternate cord to run out of the DC port of the delta 2?
Specs are there:
https://manuals.plus/ecoflow/delta-2-po ... ifications
Output Ports
AC (x4) Pure Sine Wave, 1800W total (surge 2700W), 230V~ (50Hz/60Hz)
Max Device(s) Power Supported by X-Boost 2400W
USB-A (x2) 5V 2.4A, 12W Max per port, total 24W
USB-A Fast Charge (x2) 5V 2.4A 9V 2A 12V 1.5A, 18W Max per port, total 36W
USB-C (x2) 5/9/12/15/20V 5A, 100W Max per port, total 200W
Car Charger 12.6V 10A, 126W Max
DC5521 Output (x2) 12.6V 3A, 38W Max per port
Thanks for any wisdom.
Beware the schoolyard bullies, mean girls, and fragile male egos. Move along if you can’t be kind.