High elevation and cpap
High elevation and cpap
Does anyone know if or how using a cpap at high elevation is different from using one at sea level? Does the pressure need to be increased to be an effective throat opening stent?
Re: High elevation and cpap
Most newer models (last 10 years or so) have an automatic elevation adjustment within the machine and we don't need to do anything.
You would have to look at the specifications for your brand/model machine to find the limitations but most are up to 8500 or 9000 feet.
Though some years back I went to the mountains and was up around 12K feet...and I had no problems at all.
I didn't try to change the pressures and my current pressures did the same good job they always did. No change in results.
You would have to look at the specifications for your brand/model machine to find the limitations but most are up to 8500 or 9000 feet.
Though some years back I went to the mountains and was up around 12K feet...and I had no problems at all.
I didn't try to change the pressures and my current pressures did the same good job they always did. No change in results.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: High elevation and cpap
No, because 15cmh2o over ambient is 15cmh2o over ambient no matter what the ambient pressure is (well, at least where you can breathe and survive).
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- ChicagoGranny
- Posts: 15086
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: High elevation and cpap
Most (all?) CPAP machines made now have automatic altitude adjustment, generally until about 8000 ft (2400 meters). They're not certified for higher than that, although I was advised that they'll work for somewhat higher. I guess you could go high enough to hit the capacity of the motor (especially if your prescription is high).
- ChicagoGranny
- Posts: 15086
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: High elevation and cpap
The Resmed Autoset adjusts automatically to altitude. Thus the CPAP pressure readings, in terms of absolute cm of water pressure at a particular altitude, are correct. The company guarantees validity to 8000 ft (2438 m). Since some of our patients live above that altitude, we evaluated its altitude adjustment at higher levels. With the unit set at a fixed pressure of 10 cm H2O, with the mask occluded, the output was checked at 4 elevations during a single drive, 4,600 ft (1400 m), 6200 ft (1890 m), 8700 ft (2650 m) and 10,200 ft (3115 m) by water manometry. The Autoset produced precisely 10.0 cm H2O at each elevation.
https://www.ncbi.nlm.nih.gov/pmc/articl ... %20correct.
Re: High elevation and cpap
My daughter currently lives in Albuquerque, NM. When I went with her to find a place to live, we stayed at an AirBnB up above the city itself. The official elevation of AlBQ is 5,312, and this was higher, probably around 5,600. I had no problems with CPAP and my oxygenation throughout the night was really good.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: DreamWear Nasal CPAP Mask with Headgear |
What you need to know before you meet your DME http://tinyurl.com/2arffqx
Taming the Mirage Quattro http://tinyurl.com/2ft3lh8
Swift FX Fitting Guide http://tinyurl.com/22ur9ts
Don't Pay that Upcharge! http://tinyurl.com/2ck48rm
Taming the Mirage Quattro http://tinyurl.com/2ft3lh8
Swift FX Fitting Guide http://tinyurl.com/22ur9ts
Don't Pay that Upcharge! http://tinyurl.com/2ck48rm