How to turn off Remote monitoring
How to turn off Remote monitoring
I have a Resmed AirCurve 10. The MyAir remote monitoring is on. How do I turn it off? I know how to get into the Clinical Menu but can not find where to turn off the auto reporting to MtAir.
Thank You for any help
Thank You for any help
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: S9 VPAP Auto Bilevel Machine |
Re: How to turn off Remote monitoring
Only easy option would be to use airplane mode. The cellular part of the machine is not designed to be turned off permanently, unless you open up the machine and disconnect the comm board. That may cause compliance issues if your insurance company is paying for the machine, and will also likely void your warranty.
I just leave mine in airplane mode all the time, but I paid out of pocket so no issues for me.
I just leave mine in airplane mode all the time, but I paid out of pocket so no issues for me.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear |
MacbookAir (Intel) macOS Monterey (12.6.8)
OSCAR 1.5.1
Resmed S10 Autoset w/heated hose
F30 Mask
Pressure 9-14
OSCAR Team
OSCAR 1.5.1
Resmed S10 Autoset w/heated hose
F30 Mask
Pressure 9-14
OSCAR Team
- Dog Slobber
- Posts: 4159
- Joined: Thu Feb 15, 2018 2:05 pm
- Location: Ontario, Canada
Re: How to turn off Remote monitoring
You can't just turn off reporting to MyAir or ResMed.
Your options are:
Your options are:
- Put it in AirPlane mode, but risk it uploading everything should you turn it off, without deleting the data.
- Disconnect the Modem, not difficult, open it up and pull the modem connector.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: Min EPAP: 8.2, Max IPAP: 25, PS:4 |
Re: How to turn off Remote monitoring
If you have had the machine more than 3 months, chances are no one is monitoring. The purpose of monitoring is basically for insurance compliance purposes. That extends for the first 90 days. Doctors and DMEs still could look at your data, but it's unlikely unless you called with a problem.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
Re: How to turn off Remote monitoring
Thanks to all for responding. I have had my machine for over 2 years now. I only need to report my date once a year to the sleep centers" doctor to renew my prescription for my supplies, which I get through Medicare. I only knew my data was being sent to MyAir because when I went in today for my appointment they already had my data.
It's not just that I don not want them reading my data, I also don't want the data being transmitted next to my head. Airplane mode is fine but I don't know how to get it in Airplane mode. I have played around with the knobs but I don't see an option for putting it in Airplane Mode. I feel a little stupid here, but HELP
Thanks
It's not just that I don not want them reading my data, I also don't want the data being transmitted next to my head. Airplane mode is fine but I don't know how to get it in Airplane mode. I have played around with the knobs but I don't see an option for putting it in Airplane Mode. I feel a little stupid here, but HELP
Thanks
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: S9 VPAP Auto Bilevel Machine |
- loggerhead12
- Posts: 584
- Joined: Fri Sep 01, 2017 4:00 pm
Re: How to turn off Remote monitoring
Thank you Loggerhead12
Now I really do feel stupid....that was so easy. I got into My Options but did not scroll down...duh
Now I really do feel stupid....that was so easy. I got into My Options but did not scroll down...duh

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: S9 VPAP Auto Bilevel Machine |
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: How to turn off Remote monitoring
It can happen to anyone . . .
And does.
And does.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: How to turn off Remote monitoring
Do you talk on a cell phone?lilly747 wrote: ↑Mon Nov 29, 2021 6:41 pmThanks to all for responding. I have had my machine for over 2 years now. I only need to report my date once a year to the sleep centers" doctor to renew my prescription for my supplies, which I get through Medicare. I only knew my data was being sent to MyAir because when I went in today for my appointment they already had my data.
It's not just that I don not want them reading my data, I also don't want the data being transmitted next to my head. Airplane mode is fine but I don't know how to get it in Airplane mode. I have played around with the knobs but I don't see an option for putting it in Airplane Mode. I feel a little stupid here, but HELP
Thanks
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
Re: How to turn off Remote monitoring
You want to turn this feature off because "I also don't want the data being transmitted next to my head."? What are you worried about? How close is your machine to your head while in use?lilly747 wrote: ↑Mon Nov 29, 2021 6:41 pmThanks to all for responding. I have had my machine for over 2 years now. I only need to report my date once a year to the sleep centers" doctor to renew my prescription for my supplies, which I get through Medicare. I only knew my data was being sent to MyAir because when I went in today for my appointment they already had my data.
It's not just that I don not want them reading my data, I also don't want the data being transmitted next to my head. Airplane mode is fine but I don't know how to get it in Airplane mode. I have played around with the knobs but I don't see an option for putting it in Airplane Mode. I feel a little stupid here, but HELP
Thanks
Just curious, do you use a cell phone?
Edit to add...
Not that it makes any real difference but MyAir is a phone app that works over Bluetooth while the data collected by clinicians uses cellular for data transfer.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Last edited by Conrad on Wed Dec 01, 2021 7:18 am, edited 2 times in total.
ResMed AirCurve 10 Vauto Swift FX
Do not regret growing older. It is a privilege denied to many...
Do not regret growing older. It is a privilege denied to many...
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: How to turn off Remote monitoring
Radio waves from a cell phone is exactly the same strength as that emitted by your cpap..
The FCC sets acceptable SAFE levels for both, and enforces both stringently.
Now if your bed were resting in the radar antenna at an airbase--
THAT might mess you up some.
The FCC sets acceptable SAFE levels for both, and enforces both stringently.
Now if your bed were resting in the radar antenna at an airbase--
THAT might mess you up some.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
- babydinosnoreless
- Posts: 2355
- Joined: Fri Nov 02, 2018 2:53 pm
Re: How to turn off Remote monitoring
I've had mine for a couple if years. Every few months my machine sends me a message I'm due for supplies then the dme starts calling me. I've switched insurance companies but the dmeLSAT wrote: ↑Mon Nov 29, 2021 4:47 pmIf you have had the machine more than 3 months, chances are no one is monitoring. The purpose of monitoring is basically for insurance compliance purposes. That extends for the first 90 days. Doctors and DMEs still could look at your data, but it's unlikely unless you called with a problem.
always knows who my insurance is and that I'm in compliance. On the good side they have always managed to get all the paperwork through before they even start calling me. They are still monitoring mine.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Re: How to turn off Remote monitoring
Maybe not monitoring you but instead have software that kicks out reminders at just about the same time as the machine's reminders.
I got phone calls like that from the DME I used for masks only since I have never used my insurance for a machine so no one has ever even known what machine I am currently using and no way for them to "monitor" my usage.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
- babydinosnoreless
- Posts: 2355
- Joined: Fri Nov 02, 2018 2:53 pm
Re: How to turn off Remote monitoring
I would agree with you except I've changed the frequency of the reminders multiple times and still like clockwork every three months I get the message then the phone calls start. Maybe / probably they have some kind of software that does it for them?Pugsy wrote: ↑Wed Dec 01, 2021 8:13 amMaybe not monitoring you but instead have software that kicks out reminders at just about the same time as the machine's reminders.
I got phone calls like that from the DME I used for masks only since I have never used my insurance for a machine so no one has ever even known what machine I am currently using and no way for them to "monitor" my usage.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Re: How to turn off Remote monitoring
babydinosnoreless wrote: ↑Wed Dec 01, 2021 9:01 amI would agree with you except I've changed the frequency of the reminders multiple times and still like clockwork every three months I get the message then the phone calls start. Maybe / probably they have some kind of software that does it for them?Pugsy wrote: ↑Wed Dec 01, 2021 8:13 amMaybe not monitoring you but instead have software that kicks out reminders at just about the same time as the machine's reminders.
I got phone calls like that from the DME I used for masks only since I have never used my insurance for a machine so no one has ever even known what machine I am currently using and no way for them to "monitor" my usage.
How about turning off the reminders on your machine and see if they stop calling or not.
I am betting they don't.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.