While tinkering with my settings in response to some analysis with Oscar, I noticed the hose type was set to SlimLine. I use a ClimateLine hose. Should this be set to standard, or is it considering a version of SlimLine?
Not even sure if this even makes a difference.
ResMed AirSense 10 ClimateLine Hose Setting
3 posts
• Page 1 of 1
-
southerndoc
- Posts: 242
- Joined: Sat Apr 23, 2011 9:32 pm
- Location: Marietta, GA USA
ResMed AirSense 10 ClimateLine Hose Setting
_________________
| Machine: AirSense 11 Autoset |
| Mask: ResMed AirFit N30 Nasal CPAP Mask with Headgear |
| Additional Comments: OSCAR 1.3.1, SleepHQ |
Re: ResMed AirSense 10 ClimateLine Hose Setting
The ClimateLine hose is a slimline hose. When plugged into the cpap machine the machine will automatically set the correct hose.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
-
chunkyfrog
- Posts: 34544
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: ResMed AirSense 10 ClimateLine Hose Setting
The Climateline statement will come up automatically
when the electrical contacts are engaged.
It helps to turn the machine around so you can line everything up correctly
as you insert the hose until it snaps in place.
when the electrical contacts are engaged.
It helps to turn the machine around so you can line everything up correctly
as you insert the hose until it snaps in place.
_________________
| Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Airsense 10 Autoset for Her |
3 posts
• Page 1 of 1