Resmed airsense 10 error 007

[rabbithunter22]

Anybody having this problem. Thanks

[Jas_williams]

Anybody having this problem. Thanks

Take it back to your supplier for repair

[Becca8104]

I read the users manual for this machine as I have the same model, and while it does not list what the specific error code numbers mean, the users manual states that any error code should be reported to the manufacturer. How old is your machine? if it is over 5 years, I would get it replaced rather than repaired. If the machine is new, you should be able to get it replaced under warranty.

[zonker]

Anybody having this problem. Thanks

don't have a clue. but you may want to contact these guys-

https://acbio.com/cpap-repair/

while i haven't dealt with them, they get good reviews from folks here you have used them.

good luck!

[Wulfman...]

Anybody having this problem. Thanks

Never heard of anyone with that one. No real sources for finding the Service Manuals for ResMed machines (EVER).
So, it's highly unlikely that anyone on this forum can offer any info.
But, use the link that "Zonker" gave you and find out. Many on this forum have used them and they're great.


Den

.

[Goofproof]

Does it mean it's license to Kill has expired. I hope mine has, Jim







'

[Becca8104]

when searching for error code 007 for the Airsense machine, I did find out that error code 007 on a dreamstation means that there is no internet communication, possible IP conflict. I realize that Airsense 10 & dreamstation are two different machines/brands, so error code 007 may not mean the same thing for a Resmed machine, but I do know that My Air was down for maintenance this weekend & had intermittant outages. My Air is back up now, so are you still getting the error code 007 error?

[Becca8104]

if so, you can try "rebooting" your machine by unplugging it & plugging it back in. If still having the error, contact your DME for repair/replacement. If you don't use a DME, then contact the company you bought it from for possible repair/replacement.

[WRX03]

"Motor hardware out of bounds" (service manual). Replace blower.

[zonker]

"Motor hardware out of bounds" (service manual). Replace blower.

while the op hasn't come back, that's still good to know.

at least it's now searchable should the question come up again.