Anyone know what material is in heat moisture exchanger?
Anyone know what material is in heat moisture exchanger?
Curious if anyone knows what material they use to capture the moisture?
10 to 15 cm h20
Re: Anyone know what material is in heat moisture exchanger?
I researched this back when I first purchased an AirMini as I was curious what was being used in their HumidX product.
There's not a lot of detail out there, but the best information I could find is that the HME material is usually made of foam or paper (something hygroscopic) that may also be treated with salts. I would presume the salts assist with moisture exchange as they themselves are generally hygroscopic. They may also provide some antimicrobial properties.
There's not a lot of detail out there, but the best information I could find is that the HME material is usually made of foam or paper (something hygroscopic) that may also be treated with salts. I would presume the salts assist with moisture exchange as they themselves are generally hygroscopic. They may also provide some antimicrobial properties.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ N30i Nasal CPAP Mask with Headgear Starter Pack |
Additional Comments: PS 5.8 over 7.6-21.2 |
Re: Anyone know what material is in heat moisture exchanger?
Yeah wondering if maybe it's some sort of floral foam which is what they use and humidifiers in humidors
10 to 15 cm h20
Re: Anyone know what material is in heat moisture exchanger?
The ResMed HumidX product uses a paper-like material. From my experience, something like floral foam is probably too dense of a material, although I've never had hands on that style of HME.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ N30i Nasal CPAP Mask with Headgear Starter Pack |
Additional Comments: PS 5.8 over 7.6-21.2 |
Re: Anyone know what material is in heat moisture exchanger?
I was thinking of making my own, if the floral foam is too dense I could always core out the center so it didn't restrict airflow but probably still moisten air. I would probably pre moisten the foam as well. I would still likely have to use a thin paper filter just to make sure fine particles from the foam didn't break free and going into my lungs.
10 to 15 cm h20
Re: Anyone know what material is in heat moisture exchanger?
Fine particles from the floral foam would be my other concern, but it sounds like you're taking that into consideration already. From experience, it's very "crumbly" for lack of a better description.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ N30i Nasal CPAP Mask with Headgear Starter Pack |
Additional Comments: PS 5.8 over 7.6-21.2 |
- hermeshermes
- Posts: 8
- Joined: Mon Jul 29, 2019 8:50 am
Re: Anyone know what material is in heat moisture exchanger?
Did you get around to this DIY project yet?
_________________
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: also Airfit P10 (travel use) |
This month's avatar is of the type of mask used in the 1964 B & W film Onibaba by Kaneto Shindo
Re: Anyone know what material is in heat moisture exchanger?
No not yet, haven't been feeling well, have been getting lower abdominal pain for last week and a fever starting today. Hopefully in a week I can start but getting married in next couple weeks then honeymoon week after.
10 to 15 cm h20
- Dog Slobber
- Posts: 4220
- Joined: Thu Feb 15, 2018 2:05 pm
- Location: Ontario, Canada
Re: Anyone know what material is in heat moisture exchanger?
Congratulations!
All the best to you and your partner.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: Min EPAP: 8.2, Max IPAP: 25, PS:4 |
Re: Anyone know what material is in heat moisture exchanger?
Thanks!!!!
10 to 15 cm h20
Re: Anyone know what material is in heat moisture exchanger?
mazel tov! yeah, i think you might have other things on your mind.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
Re: Anyone know what material is in heat moisture exchanger?
Yes in ER now lol waiting on CT results for my abdominal pain. Hopefully it's nothing and doesn't effect wedding.
ETA, diverticulitis is the cause no surgery at this time!
ETA, diverticulitis is the cause no surgery at this time!
10 to 15 cm h20