ResMed apnea type CA/OA recognition problem

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
pcstud
Posts: 38
Joined: Tue Feb 19, 2019 2:40 pm

Re: ResMed apnea type CA/OA recognition problem

Post by pcstud » Sun May 12, 2019 5:14 pm

Jay Aitchsee wrote:
Sun May 12, 2019 5:10 pm
pcstud wrote:
Sun May 12, 2019 5:03 pm
Where can I read more about these arousals?
https://www.bing.com/search?q=sleep+wak ... 92b9a4eea2
great! thank You! :D

_________________
MachineMaskHumidifier

User avatar
katestyles
Posts: 610
Joined: Sun Jan 06, 2019 9:08 am

Re: ResMed apnea type CA/OA recognition problem

Post by katestyles » Sun May 12, 2019 5:15 pm

pcstud wrote:
Sun May 12, 2019 4:57 pm
palerider wrote:
Sun May 12, 2019 4:48 pm
You should be able to see a difference in the corresponding Mask Pressure chart too. they're not huge differences, they're subtle, but they're there.
I know the theory ... but I really do not see the difference on the graph. :roll:
I’m having a hard time seeing the difference too, but I’m nowhere near the expert these others are.

I do know the theory that CA is caused by too much pressure, but it can also be the wrong rot or many other things. If there are obstructive mixed in with the centrals, I’m going to assume a lot of things before I assume my machine is making an error with the FOT.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: Back up mask - anything in the drawer

User avatar
katestyles
Posts: 610
Joined: Sun Jan 06, 2019 9:08 am

Re: ResMed apnea type CA/OA recognition problem

Post by katestyles » Sun May 12, 2019 5:17 pm

katestyles wrote:
Sun May 12, 2019 5:15 pm
pcstud wrote:
Sun May 12, 2019 4:57 pm
palerider wrote:
Sun May 12, 2019 4:48 pm
You should be able to see a difference in the corresponding Mask Pressure chart too. they're not huge differences, they're subtle, but they're there.
I know the theory ... but I really do not see the difference on the graph. :roll:
I’m having a hard time seeing the difference too, but I’m nowhere near the expert these others are.

I do know the theory that CA is caused by too much pressure, but it can also be the wrong epr or many other things. If there are obstructive mixed in with the centrals, I’m going to assume a lot of things before I assume my machine is making an error with the FOT.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: Back up mask - anything in the drawer

User avatar
katestyles
Posts: 610
Joined: Sun Jan 06, 2019 9:08 am

Re: ResMed apnea type CA/OA recognition problem

Post by katestyles » Sun May 12, 2019 5:18 pm

EDIT:Double posted

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: Back up mask - anything in the drawer

pcstud
Posts: 38
Joined: Tue Feb 19, 2019 2:40 pm

Re: ResMed apnea type CA/OA recognition problem

Post by pcstud » Sun May 12, 2019 5:26 pm

I also think that the reason may be a mistake with FOT. I did not know about it. Central always appeared to me mainly in the morning. Now I have to decide whether to reduce the pressure ... or maybe it should be even greater. ;-)

_________________
MachineMaskHumidifier

User avatar
Jay Aitchsee
Posts: 2936
Joined: Sun May 22, 2011 12:47 pm
Location: Southwest Florida

Re: ResMed apnea type CA/OA recognition problem

Post by Jay Aitchsee » Sun May 12, 2019 5:30 pm

pcstud wrote:
Sun May 12, 2019 5:26 pm
I also think that the reason may be a mistake with FOT. I did not know about it. Central always appeared to me mainly in the morning. Now I have to decide whether to reduce the pressure ... or maybe it should be even greater. ;-)
Or, perhaps you should just ignore them. Arousals in the morning and the corresponding CA's attributed to Sleep Wake Junk are NORMAL. SWJ events would not be counted in a lab.

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: S9 Auto, P10 mask, P=7.0, EPR3, ResScan 5.3, SleepyHead V1.B2, Windows 10, ZEO, CMS50F, Infrared Video

User avatar
palerider
Posts: 32299
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: ResMed apnea type CA/OA recognition problem

Post by palerider » Sun May 12, 2019 5:35 pm

pcstud wrote:
Sun May 12, 2019 4:57 pm
:roll:
Well, I'm done with trying to help someone who's rolling their eyes at every comment.

I'll leave that to others.

Cheers and good luck.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

pcstud
Posts: 38
Joined: Tue Feb 19, 2019 2:40 pm

Re: ResMed apnea type CA/OA recognition problem

Post by pcstud » Sun May 12, 2019 5:37 pm

Jay Aitchsee wrote:
Sun May 12, 2019 5:30 pm
pcstud wrote:
Sun May 12, 2019 5:26 pm
I also think that the reason may be a mistake with FOT. I did not know about it. Central always appeared to me mainly in the morning. Now I have to decide whether to reduce the pressure ... or maybe it should be even greater. ;-)
Or, perhaps you should just ignore them. Arousals in the morning and the corresponding CA's attributed to Sleep Wake Junk are NORMAL. SWJ events would not be counted in a lab.
I was scared when I saw the results that night, it's not easy to ignore. :wink: no changes today, we'll see tomorrow. :)

_________________
MachineMaskHumidifier

pcstud
Posts: 38
Joined: Tue Feb 19, 2019 2:40 pm

Re: ResMed apnea type CA/OA recognition problem

Post by pcstud » Sun May 12, 2019 5:40 pm

palerider wrote:
Sun May 12, 2019 5:35 pm

Well, I'm done with trying to help someone who's rolling their eyes at every comment.

I'll leave that to others.

Cheers and good luck.
I'm sorry, I didn't mean to offend you. I probably mistakenly used this emotion. It was supposed to mean that I was wondering about...

_________________
MachineMaskHumidifier

pcstud
Posts: 38
Joined: Tue Feb 19, 2019 2:40 pm

Re: ResMed apnea type CA/OA recognition problem

Post by pcstud » Sun May 12, 2019 5:51 pm

Jay Aitchsee wrote:
Sun May 12, 2019 5:08 pm
If the scale if decreased to enlarge the FOT wave and then The FOT from the Flow rate graph is compared to the corresponding FOT from the Mask Pressure graph, there is usually a phase shift apparent with one type of apnea and not the other. I forget which now.
I checked it out... and you're right! higher flow and phase shift in CA
I didn't know that.

_________________
MachineMaskHumidifier

User avatar
Jay Aitchsee
Posts: 2936
Joined: Sun May 22, 2011 12:47 pm
Location: Southwest Florida

Re: ResMed apnea type CA/OA recognition problem

Post by Jay Aitchsee » Sun May 12, 2019 6:01 pm

pcstud wrote:
Sun May 12, 2019 5:37 pm
I was scared when I saw the results that night, it's not easy to ignore
Many people are scared when they CA's. I guess it's something about it being "central" which seemingly implies there is something wrong with the brain, I guess. In reality, most centrals we see here are post arousal and are just the voluntary holding of breath after a movement, or sigh, or deep breath, or the like. Usually nothing to be concerned about.

Given the time of morning yours occurred, I wouldn't doubt you were lying there awake or semi awake and therefore, as previously stated, they don't count.

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: S9 Auto, P10 mask, P=7.0, EPR3, ResScan 5.3, SleepyHead V1.B2, Windows 10, ZEO, CMS50F, Infrared Video
Last edited by Jay Aitchsee on Sun May 12, 2019 6:07 pm, edited 1 time in total.

pcstud
Posts: 38
Joined: Tue Feb 19, 2019 2:40 pm

Re: ResMed apnea type CA/OA recognition problem

Post by pcstud » Sun May 12, 2019 6:06 pm

Jay Aitchsee wrote:
Sun May 12, 2019 6:01 pm
pcstud wrote:
Sun May 12, 2019 5:37 pm
I was scared when I saw the results that night, it's not easy to ignore
Many people are scared when they CA's. I guess it's something about it being "central" which seemingly implies there is something wrong with the brain, I guess. In reality, most centrals we see here are post arousal and are just the voluntary holding of breath after a movement, or sigh, or deep breath, or the like. Usually nothing to be concerned about.
I need to verify my knowledge. Until now, I have linked my CA's to too high a IPAP pressure, which results in reduced CO2 saturation. I think there's nothing wrong with the brain. 8)

_________________
MachineMaskHumidifier

User avatar
palerider
Posts: 32299
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: ResMed apnea type CA/OA recognition problem

Post by palerider » Sun May 12, 2019 7:07 pm

pcstud wrote:
Sun May 12, 2019 5:40 pm
palerider wrote:
Sun May 12, 2019 5:35 pm

Well, I'm done with trying to help someone who's rolling their eyes at every comment.

I'll leave that to others.

Cheers and good luck.
I'm sorry, I didn't mean to offend you. I probably mistakenly used this emotion. It was supposed to mean that I was wondering about...
Eyerolls are typically used to convey "what is this stupidity I'm hearing?" or something to that effect.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
palerider
Posts: 32299
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: ResMed apnea type CA/OA recognition problem

Post by palerider » Sun May 12, 2019 7:10 pm

pcstud wrote:
Sun May 12, 2019 5:51 pm
Jay Aitchsee wrote:
Sun May 12, 2019 5:08 pm
If the scale if decreased to enlarge the FOT wave and then The FOT from the Flow rate graph is compared to the corresponding FOT from the Mask Pressure graph, there is usually a phase shift apparent with one type of apnea and not the other. I forget which now.
I checked it out... and you're right! higher flow and phase shift in CA
I didn't know that.
How the Autoset FOT detection works:

https://www.youtube.com/watch?v=4GW97Xk06N8

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
katestyles
Posts: 610
Joined: Sun Jan 06, 2019 9:08 am

Re: ResMed apnea type CA/OA recognition problem

Post by katestyles » Sun May 12, 2019 7:49 pm

palerider wrote:
Sun May 12, 2019 7:07 pm
pcstud wrote:
Sun May 12, 2019 5:40 pm
palerider wrote:
Sun May 12, 2019 5:35 pm

Well, I'm done with trying to help someone who's rolling their eyes at every comment.

I'll leave that to others.

Cheers and good luck.
I'm sorry, I didn't mean to offend you. I probably mistakenly used this emotion. It was supposed to mean that I was wondering about...
Eyerolls are typically used to convey "what is this stupidity I'm hearing?" or something to that effect.
I generally avoid emoticons because I don't know what they mean. :oops: :? :evil:

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: Back up mask - anything in the drawer