Sleep Master vs FlashPap???

[Jas_williams]

A few things


The Flashair card only works on 2.4ghz networks it does not work on 5ghz I use flashpap to copy my data

Pop the SD card in your laptop there is a hidden folder called SD_WLAN in there is a file called CONFIG edit that in a text editor


mine contains the following lines the password gets replaced with *********** the first time the card boots replace it with your wifi password if you make any manual changes

[Vendor]

CIPATH=/DCIM/100__TSB/FA000001.JPG
APPMODE=5
APPNETWORKKEY=MyWifiPassword
VERSION=FA9CAW3AW3.00.01
CID=02544d535733324740e7b26979011301
PRODUCT=FlashAir
VENDOR=TOSHIBA
MASTERCODE=0123456789AB
LOCK=1
APPSSID=MYWifiSSID
WEBDAV=2

[KobeT]

A few things


The Flashair card only works on 2.4ghz networks it does not work on 5ghz I use flashpap to copy my data

Pop the SD card in your laptop there is a hidden folder called SD_WLAN in there is a file called CONFIG edit that in a text editor


mine contains the following lines the password gets replaced with *********** the first time the card boots replace it with your wifi password if you make any manual changes

[Vendor]

CIPATH=/DCIM/100__TSB/FA000001.JPG
APPMODE=5
APPNETWORKKEY=MyWifiPassword
VERSION=FA9CAW3AW3.00.01
CID=02544d535733324740e7b26979011301
PRODUCT=FlashAir
VENDOR=TOSHIBA
MASTERCODE=0123456789AB
LOCK=1
APPSSID=MYWifiSSID
WEBDAV=2

How did you come up with the CID? Does that automatically get put in?

[Jas_williams]

A few things


The Flashair card only works on 2.4ghz networks it does not work on 5ghz I use flashpap to copy my data

Pop the SD card in your laptop there is a hidden folder called SD_WLAN in there is a file called CONFIG edit that in a text editor


mine contains the following lines the password gets replaced with *********** the first time the card boots replace it with your wifi password if you make any manual changes

[Vendor]

CIPATH=/DCIM/100__TSB/FA000001.JPG
APPMODE=5
APPNETWORKKEY=MyWifiPassword
VERSION=FA9CAW3AW3.00.01
CID=02544d535733324740e7b26979011301
PRODUCT=FlashAir
VENDOR=TOSHIBA
MASTERCODE=0123456789AB
LOCK=1
APPSSID=MYWifiSSID
WEBDAV=2

How did you come up with the CID? Does that automatically get put in?

Full disclosure I use an S9 so the card gets erased every time i put it in the machine so i connect to the local card wifi and then use my web browser to configure the card, I point my browser at the two following URLS it then resets and joins my wifi network the file I just posted is what is auto generated


Set the Security/Master Code


Http://flashair/config.cgi?MASTERCODE=0123456789AB

Setup my Home Network

Http://flashair/config.cgi?MASTERCODE=0123456789AB&APPSSID=MYWIFISSID&APPNETWORKKEY=MYWIFIKEY&WEBDAV=2&UPLOAD=1

[Clerc03]

Which program is easier to use: Sleep Master or FlashPap?

Okay, getting the Toshiba wi-fi card working with Resmed Airsense 10 Autoset seems to be more difficult than I thought it would be...

I'd sure appreciate a link to some easy instructions on getting the Toshiba wi-fi card to work. Btw, I had already intalled Sleep Master (at least I thought I did) but I can't seem to get it to open and be readable. obtenir crédit Btw, I have that app saved in Documents folder.

I also installed the Toshiba Flash Air Tool... And along the way, I installed the Java app that's required for all these apps...

As much as I'm somewhat tech savy, I can't figure this out. Thanks for any help!!!

Flashpap without doubt

[Okie bipap]

Send me a PM with your email address and I will send you the instructions I downloaded a couple years ago. It is too lengthy to put here.

[Okie bipap]

DELETE. DUPLICATE OF PREVIOUS POST.

[Dog Slobber]

I like Sleep Master

Some tips:

• Set a static IP and ensure it's not within your routers DHCP scope. This way when testing the IP will always be the same and easy to remember.
• Make sure the device is within range of the router
• Use Station Mode
• Set Station retry count to 0 (STA_RETRY_CT=0) unlimited retries.
• Enable Noise Cancel (NOISE_CANCEL=2)
• If using WebDav, make sure it's not attached when running SleepyHead, SleepyHead might use the remote WebDav directory as the default directory and it will be intolerably slow
• When testing, always test from a laptop/computer very close to your router
• Learn how to use the ping command. - ping ip_address_of_flashair
• Sleep Master can create the CONFIG file for you
• Documentation for CONFIG file -https://www.flashair-developers.com/en/ ... pi/config/
• Don't feed your dog chicken bones