SleepyHead Project Takeover Attempt by AB
-
- Posts: 28
- Joined: Sun Mar 11, 2018 1:14 pm
Re: SleepyHead Project Takeover Attempt by AB
What is the point of this thread continuing? Wasn’t it locked?
Re: SleepyHead Project Takeover Attempt by AB
Clearly not.Coffee Man wrote: ↑Tue Feb 12, 2019 6:14 pmWhat is the point of this thread continuing? Wasn’t it locked?
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: SleepyHead Project Takeover Attempt by AB
Threads are rarely locked unless someone causes a problem in it.Coffee Man wrote: ↑Tue Feb 12, 2019 6:14 pmWhat is the point of this thread continuing? Wasn’t it locked?
This thread isn't the one that had problems in it. There hasn't been a reason to lock this one. People are pretty much behaving themselves.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: SleepyHead Project Takeover Attempt by AB
I've been misbehaving the best I can; I'm just not very good at it.
-Jeff (AS10/P30i)
Accounts to put on the foe list: Me. I often post misleading, timewasting stuff.
Accounts to put on the foe list: Me. I often post misleading, timewasting stuff.
Re: SleepyHead Project Takeover Attempt by AB
Do we need to have some more lessons?



Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: SleepyHead Project Takeover Attempt by AB
I refuse to send you one more dime of my money for those lessons, sir.
But is there any way we can get the SS over at AB to come lock this thread for us?
-Jeff (AS10/P30i)
Accounts to put on the foe list: Me. I often post misleading, timewasting stuff.
Accounts to put on the foe list: Me. I often post misleading, timewasting stuff.
Re: SleepyHead Project Takeover Attempt by AB
jnk... wrote: ↑Tue Feb 12, 2019 2:37 pmSpecific clipart that is legally modified for use for a specific application is considered by some to be about as protected as anything else is on this planet.
He knows what a fork is.
Respect is subjective, and perceptions may have a basis that may come to lead to misunderstandings on a grand scale.
He knows what a trademark is.
Look-alike feel-alike can be a respect issue among tech partnerships, especially informal ones.
People who are hurting, for whatever reason, can be quick to lash out, especially when respect has come to be seen as an issue and when outside pressures start to pile up.
Would everyone in this room who has never been irrational or emotional please raise your hand.
The pressure of thousands of PAP users focusing their life-and-death hopes and dreams on one man with time constraints in an ever-changing technology landscape can easily make someone feel the weight of the world upon his shoulders, even when no one purposely set out to make him feel that way. If a person needs peace and quiet to work, he sometimes needs to go dark and can be sent right over the edge if people keep turning on the light and keep constantly tapping on his shoulder all day and night every day and night. It is great when people want to be helpful, but when you are behind the wheel doing your best to drive the 18-wheeler, it's not like you appreciate a cab full of people trying to help you steer and work the pedals.
Just sayin'.
If I were Mark, I probably would have cracked from the pressure a long time ago. Give the man a break, maybe?
I ain't defending anything or anyone, but coins have two sides by their very nature.
I am neutral in this because I don't have the judging expertise to score a boxing match. But I think I know when someone is starting to look and sound beat up, whether the blows are coming from without or within.
[/quot
Last edited by Lucyhere on Tue Feb 12, 2019 7:36 pm, edited 2 times in total.
Resmed AirSense 10 Autoset for her w/humid air/heated Humidifier
Bleep/P10
Bleep/P10
Re: SleepyHead Project Takeover Attempt by AB
But, you were progressing so well!
Is this you: https://www.youtube.com/watch?v=H2IZP1f3rlg aiming to misbehave?
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: SleepyHead Project Takeover Attempt by AB
delete
Resmed AirSense 10 Autoset for her w/humid air/heated Humidifier
Bleep/P10
Bleep/P10
Re: SleepyHead Project Takeover Attempt by AB
No doubt, this thing isn’t worth having up at all...
Re: SleepyHead Project Takeover Attempt by AB
...but Thank God (and Johnny?) for the freedom to choose to just ignore the worthless, right?
Sometimes you can't see where the path is leading ... though definitely not everyone should wander unknown paths.
Don't go chasing waterfalls~~~
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: DreamWear Nasal CPAP Mask with Headgear - Fit Pack (All Cushions Included with Medium Frame) |
Additional Comments: Resmed 10 AirSense |
Began XPAP May 2016. Autoset Pressure min. 8 / max 15. Ramp off. ERP set at 2. No humidity. Sleepyhead software installed and being looked at daily, though only beginning to understand the data.
Re: SleepyHead Project Takeover Attempt by AB
Someone has already contacted *ME* asking for Mark's email address (I don't have it anymore), because Mark put up that notice on the sleepyhead page asking for someone to take over the project, and left no way to contact him! (the contact link goes to "Oops! That page can’t be found.")prodigyplace wrote: ↑Tue Feb 12, 2019 5:40 amMark seems to be in a good place right now but is looking for a project maintainer to look after SleepyHead.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
-
- Posts: 1562
- Joined: Tue May 06, 2008 5:57 pm
- Location: Murrysville, PA
Re: SleepyHead Project Takeover Attempt by AB
Have you looked for the Facebook group? Gone. Mark has erased all of the work done by those of us that collaborated with him to create these releases. While Mark gets credit for the concept and leadership of this software, it was a shared effort that included countless hours by others, and he has erased all of our records, correspondence and files on every internet venue he controlled.prodigyplace wrote: ↑Tue Feb 12, 2019 5:40 amStory, I misread that. I posted 1.0 and, for a while Mark's 1.1 builds. I never posted later ones I had and Mark never gave those out for free. Mark actually thanked me for posting 1.0 separate from his servers to be sure we had it here.
Mark seems to be in a good place right now but is looking for a project maintainer to look after SleepyHead. He still posts occasionally on his SleepyHead Facebook group.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead software. Just changed from PRS1 BiPAP Auto DS760TS |
Re: SleepyHead Project Takeover Attempt by AB
New member here and sad to see this turn of events. Regardless of egos involved, blame placed and insults hurled I urge the folks involved in this kerfuffle to sort it out. For those of us who with serious apnea Sleepyhead is indispensable. It saves lives.
Let's review: Sleepyhead SAVES LIVES.
Please consider this carefully as you slug it out. Real people depend on Sleepyhead and are affected by this recent turn of events.
Let's review: Sleepyhead SAVES LIVES.
Please consider this carefully as you slug it out. Real people depend on Sleepyhead and are affected by this recent turn of events.
Re: SleepyHead Project Takeover Attempt by AB
Hi Sansnap ~~~Sansnap wrote: ↑Tue Feb 12, 2019 11:46 pmNew member here and sad to see this turn of events. Regardless of egos involved, blame placed and insults hurled I urge the folks involved in this kerfuffle to sort it out. For those of us who with serious apnea Sleepyhead is indispensable. It saves lives.
Let's review: Sleepyhead SAVES LIVES.
Please consider this carefully as you slug it out. Real people depend on Sleepyhead and are affected by this recent turn of events.
Welcome to the forum.


_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: DreamWear Nasal CPAP Mask with Headgear - Fit Pack (All Cushions Included with Medium Frame) |
Additional Comments: Resmed 10 AirSense |
Began XPAP May 2016. Autoset Pressure min. 8 / max 15. Ramp off. ERP set at 2. No humidity. Sleepyhead software installed and being looked at daily, though only beginning to understand the data.