EPR. to use or not to use?
EPR. to use or not to use?
I've had my epr setting at 3 since I started treatment about 6 weeks ago.... My ahi is around 7 or 8...can the epr setting affect your AHI or is it merely just a tool for more comfortable and tolerable therapy?
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
| Additional Comments: Pressure settings 13/20 |
- chunkyfrog
- Posts: 34544
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: EPR. to use or not to use?
Whether or not it affects therapy significantly is still open to debate, even among experts.
It is a feature intended to allow an easier transition to therapy.
Since everyone is different, you may try different settings, for a few nights at a time.
Your are free to choose what is most comfortable.
Only your results should determine your choice.
It is a feature intended to allow an easier transition to therapy.
Since everyone is different, you may try different settings, for a few nights at a time.
Your are free to choose what is most comfortable.
Only your results should determine your choice.
_________________
| Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Airsense 10 Autoset for Her |
Re: EPR. to use or not to use?
It's a comfort tool. If it makes your breathing easier...use it. It has very little effect on AHI..if any. Everyone is different. I have used EPR 2 for a long time. On a few occasions I tried EPR 1 and EPR off. In both occasions , my breathing was uncomfortable and my AHI went up (From the breathing issues). If the machine listed in your profile is correct, it supplies no meaningful data. I would try increasing your pressure to see if the AHI comes down. \
NOTE...If your pressure is 8/15, you have an Autoset and the machine you listed is incorrect. If this is the case..increase your minimum pressure a bit.
NOTE...If your pressure is 8/15, you have an Autoset and the machine you listed is incorrect. If this is the case..increase your minimum pressure a bit.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
| Additional Comments: Back up is a new AS10. |
Re: EPR. to use or not to use?
Whether EPR affects your therapy may depend on what kind of apnea you have. For some people, EPR can increase treatment emergent central apneas.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: DreamWear Nasal CPAP Mask with Headgear - Fit Pack (All Cushions Included with Medium Frame) |
| Additional Comments: APAP 6-12. EPR 2. Sleepyhead. |
Official Foe™ on @Palerider's public list of foes. 
Rules to live by: Be wary of anyone boasting their behavior is like that of a fictional sociopath.
Rules to live by: Be wary of anyone boasting their behavior is like that of a fictional sociopath.
Re: EPR. to use or not to use?
I'm not sure about Auto sets or type of machine. It's a ResMed airsense 10 set to APAP... So does that mean I have an autoset machine like you said? Also tell me why you think raising the lower pressure would be helpful as opposed to raising the higher pressure..LSAT wrote: ↑Mon Oct 29, 2018 3:42 pmIt's a comfort tool. If it makes your breathing easier...use it. It has very little effect on AHI..if any. Everyone is different. I have used EPR 2 for a long time. On a few occasions I tried EPR 1 and EPR off. In both occasions , my breathing was uncomfortable and my AHI went up (From the breathing issues). If the machine listed in your profile is correct, it supplies no meaningful data. I would try increasing your pressure to see if the AHI comes down. \
NOTE...If your pressure is 8/15, you have an Autoset and the machine you listed is incorrect. If this is the case..increase your minimum pressure a bit.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
| Additional Comments: Pressure settings 13/20 |
Re: EPR. to use or not to use?
I wouldn't go increasing any pressure until I knew exactly what that AHI is composed of if it were me.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: EPR. to use or not to use?
I've definitely had an emerging Central apneas but I've heard that this is common and overtime dissipates... I do have obstructive sleep apnea...
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
| Additional Comments: Pressure settings 13/20 |
Re: EPR. to use or not to use?
Typically my AHi is around 7... Approximately three out of seven obstructive three out of Seven Central and 1 out of 7 hypopnea
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
| Additional Comments: Pressure settings 13/20 |
Re: EPR. to use or not to use?
More pressure won't fix the centrals.
Small chance more pressure might make the centrals worse.
Before advising anything I prefer to see the actual detailed graphs so I know exactly what is going on.
Need to use the software to see the details.
For all we know the majority of the flagged events are right smack after a known awake event and not even real.
Small chance more pressure might make the centrals worse.
Before advising anything I prefer to see the actual detailed graphs so I know exactly what is going on.
Need to use the software to see the details.
For all we know the majority of the flagged events are right smack after a known awake event and not even real.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: EPR. to use or not to use?
Yes I'm trying to fix the obstructive not the centrals...I will do my best to post a few nights of sleepyhead day to here shortly and appreciate any feedbackPugsy wrote: ↑Mon Oct 29, 2018 6:14 pmMore pressure won't fix the centrals.
Small chance more pressure might make the centrals worse.
Before advising anything I prefer to see the actual detailed graphs so I know exactly what is going on.
Need to use the software to see the details.
For all we know the majority of the flagged events are right smack after a known awake event and not even real.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
| Additional Comments: Pressure settings 13/20 |
Re: EPR. to use or not to use?
Yes, it absolutely can, because EPR drops the pressure, and if it drops it too much, you'll have obstructive events.
EPR also increases ventilation, and if you're sensitive to that, it can cause central events.
Post some charts.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: EPR. to use or not to use?
I'm having trouble figuring out how to get the charts posted
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
| Additional Comments: Pressure settings 13/20 |
Re: EPR. to use or not to use?
okay this is strange I toggled my keyboard in the sleepyhead software and now I can't seem to close out of the sleepyhead software or do anything in it. It's like a jammed up my computer or something anybody going to know what's going on?
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
| Additional Comments: Pressure settings 13/20 |
Re: EPR. to use or not to use?
Try hitting F11JBarizona wrote: ↑Mon Oct 29, 2018 6:47 pmokay this is strange I toggled my keyboard in the sleepyhead software and now I can't seem to close out of the sleepyhead software or do anything in it. It's like a jammed up my computer or something anybody going to know what's going on?
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: EPR. to use or not to use?
That didn't work. I can navigate on the charts but up at the top where there's file and View and data I can't do anything with it and I can't close down the program without restarting my computer and then when I restart it again the same thing happens. This is messed uppalerider wrote: ↑Mon Oct 29, 2018 6:49 pmTry hitting F11JBarizona wrote: ↑Mon Oct 29, 2018 6:47 pmokay this is strange I toggled my keyboard in the sleepyhead software and now I can't seem to close out of the sleepyhead software or do anything in it. It's like a jammed up my computer or something anybody going to know what's going on?
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
| Additional Comments: Pressure settings 13/20 |

