Looking for a shorter hose.

[cdestuck]

I have a Resmed Airsense 10 autoset with the slimline hose. The hose is 6' I believe an really could do with one 3-4' long. Have looked for a shorter one without success. Would anyone know of a source? Tks

[OkyDoky]

Our host has one. Non-heated of course. https://www.cpap.com/productpage/4-foot ... cuffs.html
Just be careful not to pull your machine off the bed side table.

[LSAT]

I agree with OD......It's easy to roll over and pull the machine over. Once the water from the humidifier gets into the machine it may stop working.

[cdestuck]

Tks guys. Did order the one from here. 6' is just way to long and 4' will be plenty. My machine is literally at edge of bed and especially as I just went to a top of the head Dreamware I can do with less tuning.

[JimW159]

...4' will be plenty. ...just went to a top of the head Dreamware I can do with less tuning.

That is, if the swivel at the top moves freely. In my brief experience with this mask, I found the swivel to often be restricted by the pillow.

[palerider]

6 feet is too long?

hell, 6 feet is too short, my 10 foot hose is my friend.

came in handy when I took the cpap down to the big scary radiology operating room to have this catheter placed under local.. from listening to 'em talking, they were grateful there was a long hose on the cpap so they could get it plugged in, and placed out of the way.

[chunkyfrog]

I had considered a shorter hose for travel, but since I have gotten pretty good at packing it . . . Never mind.