software to read respironics series M smartcard?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
georgepds
Posts: 145
Joined: Fri Nov 21, 2008 4:43 pm

software to read respironics series M smartcard?

Post by georgepds » Mon Nov 21, 2016 12:27 pm

I use an older machine, M Series Bipap Auto with a smart card

Way back when I started using a bipap, I had a smart card reader, and some software that could crack the data on the card an produce reports on a windows machine ( probably XP) . After a while, I just used the cpap, and stopped reading the reports

I’d like to look at the data again ( now using windows 7) .. Anyone have a clue what software to use
TIA

--G
Top
User avatar
palerider
Posts: 32308
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: software to read respironics series M smartcard?

Post by palerider » Mon Nov 21, 2016 12:38 pm

encore is the only thing that reads it, basic, pro, viewer, depending on which version you find.

there's links over on apneaboard for it.
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Top
Woody
Posts: 591
Joined: Sat Mar 10, 2007 7:59 pm

Re: software to read respironics series M smartcard?

Post by Woody » Mon Nov 21, 2016 4:38 pm

Were you using Encore Basic with your Windows Xp machine ? I upgraded my Windows Xp to
windows 7 and Encore Basic still works fine for me. I have Windows 10 on another machine
but just haven't gotten around to trying Encore Basic on it.
Top
xyz
Posts: 407
Joined: Fri Dec 07, 2007 1:38 pm

Re: software to read respironics series M smartcard?

Post by xyz » Mon Nov 21, 2016 4:41 pm

Be sure to get the free EncoreBasic version.
It works on Win 7.
I made the mistake of buying the higher version.
It's not any more useful than EncoreBasic.
Top
User avatar
Pugsy
Posts: 65426
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: software to read respironics series M smartcard?

Post by Pugsy » Mon Nov 21, 2016 6:02 pm

Encore Basic seems to work fine on my Windows 10 laptop that I upgraded last year from Win 7 to Win 10.
I may have to RISE but I refuse to SHINE.
Top
User avatar
6PtStar
Posts: 2659
Joined: Mon Jun 18, 2007 1:58 pm
Location: Texas, Is there any other place?

Re: software to read respironics series M smartcard?

Post by 6PtStar » Mon Nov 21, 2016 11:32 pm

Pugsy wrote:Encore Basic seems to work fine on my Windows 10 laptop that I upgraded last year from Win 7 to Win 10.
What version Encore Basic are you running on Windows 10. I have version 2.1 on my Windows 7 machine but I think Windows 10 may be in my near future.

Jerry
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting: "Wow what a ride!"
I still play Cowboys and Bad Guys but now I use real bullets. CAS
Top
Woody
Posts: 591
Joined: Sat Mar 10, 2007 7:59 pm

Re: software to read respironics series M smartcard?

Post by Woody » Tue Nov 22, 2016 12:39 am

I am running encore basic 2.4
Top
User avatar
Pugsy
Posts: 65426
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: software to read respironics series M smartcard?

Post by Pugsy » Tue Nov 22, 2016 7:36 am

6PtStar wrote: What version Encore Basic are you running on Windows 10. I have version 2.1 on my Windows 7 machine but I think Windows 10 may be in my near future.
Encore 2.4xx
it's the latest version I have been able to find.
There could be a newer version but I haven't seen it or heard.
I may have to RISE but I refuse to SHINE.
Top
User avatar
georgepds
Posts: 145
Joined: Fri Nov 21, 2008 4:43 pm

Re: software to read respironics series M smartcard?

Post by georgepds » Tue Nov 22, 2016 12:42 pm

Thanks for the response

But.. i can't seem to find a place to downlord or buy Encore basic.

can someone point me in the right direction?
Top
User avatar
OkyDoky
Posts: 2869
Joined: Mon Aug 25, 2014 5:18 pm

Re: software to read respironics series M smartcard?

Post by OkyDoky » Tue Nov 22, 2016 12:57 pm

I sent you a PM.
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
Top
User avatar
6PtStar
Posts: 2659
Joined: Mon Jun 18, 2007 1:58 pm
Location: Texas, Is there any other place?

Re: software to read respironics series M smartcard?

Post by 6PtStar » Tue Nov 22, 2016 1:36 pm

Pugsy wrote:
6PtStar wrote: What version Encore Basic are you running on Windows 10. I have version 2.1 on my Windows 7 machine but I think Windows 10 may be in my near future.
Encore 2.4xx
it's the latest version I have been able to find.
There could be a newer version but I haven't seen it or heard.
Thanks, I think I know where I can find a copy. As long as it works don't need a newer version.

Jerry
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting: "Wow what a ride!"
I still play Cowboys and Bad Guys but now I use real bullets. CAS
Top
User avatar
OkyDoky
Posts: 2869
Joined: Mon Aug 25, 2014 5:18 pm

Re: software to read respironics series M smartcard?

Post by OkyDoky » Tue Nov 22, 2016 2:32 pm

georgepds wrote:Thanks for the response

But.. i can't seem to find a place to downlord or buy Encore basic.

can someone point me in the right direction?
Georgepds, I sent you a Private Message. Look at the top left of the screen where it says User Control Panel and click on the new messages.
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
Top
User avatar
georgepds
Posts: 145
Joined: Fri Nov 21, 2008 4:43 pm

Re: software to read respironics series M smartcard?

Post by georgepds » Wed Nov 23, 2016 3:33 pm

OkyDoky

A public thanks for your help

--G
Top


Return to “CPAP and Sleep Apnea Message Board”