Which hose hanger should I buy?
Which hose hanger should I buy?
I've recently had to change from being a stomach sleeper to a back sleeper due to some medical issues so I've had to change mask and head gear.
If I can get used to this it can be a blessing because there are a lot of better mask options out there for me. I'm now using an Air fit P10 but
I'm having trouble with the hose and need to get a hanger.
What hose hanger would you suggest I purchase?
Bryan
If I can get used to this it can be a blessing because there are a lot of better mask options out there for me. I'm now using an Air fit P10 but
I'm having trouble with the hose and need to get a hanger.
What hose hanger would you suggest I purchase?
Bryan
bryansong
Re: Which hose hanger should I buy?
Check out Sears parts: Washer Drain Hose Retainer Part #: WH41X10133bryansong wrote: What hose hanger would you suggest I purchase?
http://www.searspartsdirect.com/part-nu ... 6/363.html
This is the hanger that comes with a new washing machine and provides support to the drain hose. In my application it hangs from the bed's steel headboard frame (held with a magnet attached to the hose hanger with a bolt & Nut). In another setup I attached the hanger to the wall with a screw & anchor. This hanger is exactly the right dimensions for the xPAP hose (22mm, 15mm, or heated) and allows smooth movement when adjustment in length of the hose is needed; the ends of the support channel are designed to allow easy removal and replacement of the hose when cleaning or when travelling.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Brevida™ Nasal Pillow CPAP Mask with Headgear |
Additional Comments: BU Mach AirSense 10 AutoSet - Mask = F&P Brevida BU ResMed P10 - Pressure = 10-17 On CPAP since 12/05/2008 Prior ID on CPAPTalk.com = JimW203 |
Last edited by JimW159 on Sat Oct 29, 2016 3:20 pm, edited 1 time in total.
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Which hose hanger should I buy?
Cpap.com has several hose hangers.
I would suggest any one.
I would suggest any one.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Which hose hanger should I buy?
I have a home-made contraption consisting of a swivel plant hanger, section of fishing rod, and hair scrunchies.
When we travel, I take scrunchies and duck tape or clothes pins.
Nothing fancy, just odds and ends for an impromptu "invention".
When we travel, I take scrunchies and duck tape or clothes pins.
Nothing fancy, just odds and ends for an impromptu "invention".
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: Which hose hanger should I buy?
I use the hose boss type that goes between the mattress and box spring....love it. Prior to that one I had a swivel plant hanger screwed to the headboard.... if my husband had been alive to see that.. I would be the deceased one.. "WHAT!! YOU PUT SCREWS IN OUR SOLID OAK HEADBOARD!!!!!!!!!!" tee hee
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Started cpap in 2010.. still at it with great results.
Re: Which hose hanger should I buy?
duct tape fixes everything
I always take some when travelling and staying in hotels.
I always take some when travelling and staying in hotels.
- DanceDiva26
- Posts: 79
- Joined: Fri Oct 14, 2016 2:33 pm
Re: Which hose hanger should I buy?
<hair scrunchies>
This made me literally laugh out loud, ChunkyFrog. Very inventive and one can coordinate with the current bedding of the day/night!
I like jerry-rigging things too tho' my instruments of choice tend to be stuff I crocheted, beading wire, and various cable ties. Ya' ought to see the walkers I've decked out for use after surgery. But I refuse to use gray duct tape...got to at least be the clear tape.
This made me literally laugh out loud, ChunkyFrog. Very inventive and one can coordinate with the current bedding of the day/night!
I like jerry-rigging things too tho' my instruments of choice tend to be stuff I crocheted, beading wire, and various cable ties. Ya' ought to see the walkers I've decked out for use after surgery. But I refuse to use gray duct tape...got to at least be the clear tape.
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Resmed S9 |
Re: Which hose hanger should I buy?
I have a old fashion bed with a headboard I just hang the hose over the top (about 2.5 ft above the matress.) the wall holds it in the middle of the bed. Jim
Use data to optimize your xPAP treatment!
"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire
"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire
Re: Which hose hanger should I buy?
Thanks for the replies.
I don't have a head board and I do have a 12" mattress so I should try to get one of the taller models.
I don't have a head board and I do have a 12" mattress so I should try to get one of the taller models.
bryansong
Re: Which hose hanger should I buy?
The Cozy Hoze Boss works real good. Use it with Scotch 3M wall attachment strips.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: CPAP 10 cmH20., User since 1/1/15. |
Re: Which hose hanger should I buy?
Been using this one for years with no problems. https://www.cpap.com/productpage/HoseBu ... ystem.html
_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier |
Mask: Evora Full Face Mask - Fitpack |
Additional Comments: AirCurve 10 ASV, Oscar V1.0.1-r-1 |
US Navy Retired 1973,AirCurve 10 ASV, Mode: ASV Auto, Min EPAP: 7.2, Max EPAP: 15.0, Min PS:4.0, Max PS: 15.0, Mask ResMed Airtouch F20, Backup: (2) AirCurve 10 ASV
Re: Which hose hanger should I buy?
a 3m command hook stuck to the wall over the head of the bed works great, and can be removed without tearing up the wall.bryansong wrote:Thanks for the replies.
I don't have a head board and I do have a 12" mattress so I should try to get one of the taller models.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Which hose hanger should I buy?
I used 3M's Command Cord Bundler - two of them on my headboard, but they would work fine on the wall too:
https://www.amazon.com/Command-Bundlers ... cable+clip
https://www.amazon.com/Command-Bundlers ... cable+clip
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: Pressure 13-20, EPR 3 |
Re: Which hose hanger should I buy?
Bryan, I use this one:

Its $18.99 in Amazon.
So you are from Independence MO? If you go there to Harry Truman library you could see this piece of paper that president Truman signed "by the way" and thus recognizing the state of Israel (where I was born):
http://www.trumanlibrary.org/exhibit_do ... ROIexhibit

Its $18.99 in Amazon.
So you are from Independence MO? If you go there to Harry Truman library you could see this piece of paper that president Truman signed "by the way" and thus recognizing the state of Israel (where I was born):
http://www.trumanlibrary.org/exhibit_do ... ROIexhibit
_________________
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: S9 Autoset machine; Ruby chinstrap under the mask straps; ResScan 5.6 |
Last edited by avi123 on Sat Oct 29, 2016 7:59 pm, edited 1 time in total.
- Okie bipap
- Posts: 3566
- Joined: Thu Oct 15, 2015 4:14 pm
- Location: Central Oklahoma
Re: Which hose hanger should I buy?
When I travel, I use the Cozy Hose Boss to control my hose. I just hook it to the wall higher than where my head will be when I am in bed. When I am at home, I simply run it up over the the headboard of my bed which keeps it out of my way. I am a back sleeper. At home, I use an adjustable bed, and when traveling, I use two foam wedge pillows to keep my head elevated which takes pressure off my back so my arthritis doesn't bother me at night.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Evora Full Face Mask - Fitpack |
Additional Comments: IPAP 20-25, ps 4, OSCAR software |
Growing old is mandatory, but growing up is optional.