Error codes help

[Tezza259]

I would like to know how to fix e-codes... If I just turn the machine on it comes up with e-23 and beeps and if I push the button below the heat and the two arrows and turn the machine back on it come up with e-3 but with either e-codes nothing works,and the lights flash and beeps..

The machine is a C-Flex. Remstar/pro with a smart card
I had it given to me and was told it did work... Can anyone help me,as I've just been diagnosed with severe sleep ap and don't have much money.

[Wulfman...]

I would like to know how to fix e-codes... If I just turn the machine on it comes up with e-23 and beeps and if I push the button below the heat and the two arrows and turn the machine back on it come up with e-3 but with either e-codes nothing works,and the lights flash and beeps..

The machine is a C-Flex. Remstar/pro with a smart card
I had it given to me and was told it did work... Can anyone help me,as I've just been diagnosed with severe sleep ap and don't have much money.

YOU can't fix it.
See the following link to the complete list of error codes which applied to the Pro 2 w/C-Flex and the Auto w/C-Flex.
They MAY apply to your machine but there's no guarantee.

viewtopic/t111196/viewtopic.php?f=1&t=1 ... es#p221849

Contact http://www.acbio.com and see what they have to say.

You probably have a machine that WAS worth about $25 and are looking at $200 or more to fix it.
And, depending on which generation and model it is, it probably isn't data-capable.
If it's one of the following models (check the underside of the machine), then it was the REMstar Pro series that was discontinued in April of 2005 and replaced by the REMstar Pro 2 (which was data-capable).

1005961
1006169
1010220
1013465
1022849
1013518
1014438
1019485
1023101



Den

.

[Tezz259]

Thanx Den.

AU 1006171 it's not on the list you sent me so I have contacted the link you also sent me.
Again thanx
Will let all know the outcome