How to change the pressure on system 1

[Day_Dreamer]

A friend just got the system 1 from reporonics

how does he make changes to the pressure setting via the physicians menu

did a search but to no avail

THANKS

[Pugsy]

Philips-Respironics PR System One (REMstar Auto, REMstar DS150, BiPAP ST, BiPAP AVAPS, BiPAP Auto with Bi-Flex, BiPAP Pro with Bi-Flex, REMstar Pro with C-Flex & REMstar Plus): Supply power to the device: first, plug the socket end of the AC power cord into the power supply. Then plug the pronged end of the AC power cord into an electrical outlet that is not controlled by a wall switch. Finally, plug the power supply cord's connector into the power inlet on the back of the device. Once the device is powered, the home screen appears (it is a large box on the screen with four little boxes you can select by turning the control wheel). Turn the wheel to toggle between the 4 options and highlight "setup". Once setup is highlighted press and hold both the control wheel and ramp button on the device for at least 5 seconds. You will hear a double beep and the provider mode screen will appear. Also, you should remove the smart card prior to making adjustments, otherwise it will revert to the previous settings.

Once in the provider menu toggle to setup again and scroll through the options and pressure settings should be a choice in the menu.

[Day_Dreamer]

found it

never mind

thanks

[Day_Dreamer]

Thanks pugsy

that is much more concise

[palerider]

viewtopic.php?f=1&t=106794&hilit=+CPAP+Basics+re%3A