Derek's MyEncore websites

Wulfman · Post by **Wulfman** » Sat Jul 07, 2007 4:49 pm

FYI

For some time, these sites has been unavailable (for whatever reasons).
There were a number of folks who have been reporting that they were trying to access the site and couldn't.
I just happened to try them and it seems they are back up and working again.
The first link is for the "home" site and the second one is for the download of 1.5B7 which works for Encore Pro 1.5i and 1.6i.

http://lewiston.mit.edu/myencore/

http://lewiston.mit.edu/myencore/myencore15b7.msi

Best wishes,

Den

Clarification:

The combination of Encore Pro 1.6i and MyEncore 1.5B7 DOES work with the "Legacy"/"Classic"/"Tank" machines (as does Encore Pro Analyzer). However, Respironics did something different with the data on the M Series machines and consequently MyEncore doesn't report all of the information from those machines.
So, if you have an M Series machine, Encore Pro Analyzer is the way to go.

D

.

Snoredog · Post by **Snoredog** » Sun Jul 08, 2007 7:31 pm

and here is the webpage which shows what you are seeing on MyEncore:

myencore.php

roncron · Post by **roncron** » Mon Jul 09, 2007 10:56 am

Most of you know this already, but for those who don't:

MyEncore doesn't work with the latest version of Encore Pro, and it appears that it is no longer being updated.

However, James Skinner has a similar but newer program that works with the latest version of Encore Pro. It's called Encore Pro Analyzer, and is available here:

http://james.istop.com/EncoreProAnalyzer/

DreamStalker · Post by **DreamStalker** » Mon Jul 09, 2007 11:44 am

roncron wrote:Most of you know this already, but for those who don't:

MyEncore doesn't work with the latest version of Encore Pro, and it appears that it is no longer being updated.

However, James Skinner has a similar but newer program that works with the latest version of Encore Pro. It's called Encore Pro Analyzer, and is available here:

http://james.istop.com/EncoreProAnalyzer/

I don't think his request button is working properly ... I get an error whenever I have tried to request the most current version.

goose · Post by **goose** » Thu Jul 12, 2007 2:46 pm

I got the link to the software, downloaded it and tried to install.....
The install didn't work - no error message or no indication that the install has succeeded or failed.
I'm running the .NET framework 1.1 SP2 and 2.0, but still no luck. (I think Analyzer requires 2.0)
The first time I tried the install it appeared to download lots of files from the web and then went into the install. It had the "Preparing to Install" window up which then just disappeared -- again, no indication of failure....
I emailed James with the info, but haven't heard back yet. -- that was only a day or so ago, so I'm being patient....James has apparently come up with an excellent replacement for MyEncore (Which doesn't work on 1.8i), so I'm not going to get overly impatient -- I'm sure it's a "Side project" and that he has other priorities in life.
I know it works -- I've seen reports from it from others here (socknitster for one)...
If anyone has any ideas -- they'll be welcomed
System= IBM Thinkpad Z60m; Win XP Pro; Encore Pro 1.8i; 1GB RAM, approx 5GB storage avail (yeah I know -- I need to clean it up)...

Thanks for any info
cheers
gg

shippy · Post by **shippy** » Sat Jul 14, 2007 10:18 am

Den

Thanks for providing the links

I downloaded the second one for ver. 1.6 and no problems installing it, but it seems several of the charts are blank (no data available) wondering if since i erased my card recently and started again on July 3rd i have about eleven days on my card if my encore needs more day's to show all the data.
I get no data available on the following charts (and some of them may be for apap)

avg. duration of apneas
seconds in apnea
fraction of time in variable breathing
flow limitaion index
dependence of flow limitation index on pressure
daily mask leakage rate

should the software automatically find this data or do i have to input it ?
all of the other charts are working fine and have data on them.

Dale

shippy · Post by **shippy** » Sat Jul 14, 2007 12:21 pm

Just noticed the clarification i do have an m series machine which explains the no data question. tried downloading pro analyzer but get an error message unable to access my encore data on sql server (or some thing to that affect) so it does'nt work either.

Dale

goose · Post by **goose** » Sat Jul 14, 2007 2:41 pm

Still can't get it to install..
I've tried to download the down rev versions, but the website sends about 60% then goes away.....never finishes and doesn't answer polls or queries....seems to time out
Also haven't heard from James yet on suggestions.
Oh well.....As I said before, I know it works because I've seen others reports based on the product, so........patience goose, patience........

cheers
gg

Derek's MyEncore websites

Derek's MyEncore websites

Encore Pro Analyzer

Re: Encore Pro Analyzer