Mirage Quattro Moderated Chat...

WearyOne · Post by **WearyOne** » Mon May 07, 2007 11:49 am

For those of you who might be interested, Talk About Sleep is having a moderate chat tomorrow night on the Quattro. Here is a partial post from the site admin:

"Mirage Quattro™ special event Moderated Chat May 8th from 9-10pm Eastern.

Discussion will focus on ResMed's new Mirage Quattro full face mask. Expert guest speaker is Allen Ehrlich, Director, Product Management, Americas.

5 Mirage Quattro masks will be given away in a drawing during the event. All participants are eligible to win, but you must be present when names are drawn. "

http://www.talkaboutsleep.com/

Pam

Janine · Post by **Janine** » Mon May 07, 2007 12:18 pm

Thank you for the reminder!!!

ddpelp · Post by **ddpelp** » Mon May 07, 2007 1:34 pm

Do you have to do any thing prior to chat such as log in join or??
thanks

WearyOne · Post by **WearyOne** » Mon May 07, 2007 1:41 pm

ddpelp wrote:Do you have to do any thing prior to chat such as log in join or??
thanks

http://www.talkaboutsleep.com/chat/cale ... ate=5/8/07

This link might help. I've never gone to one of their chats, so I'm not exactly sure how it works.

Pam

rested gal · Post by **rested gal** » Fri May 11, 2007 7:17 pm

Clickable link to summary of the chat transcript:

Mirage Quattro Chat Transcript Summary - April 17, 2007

Brian Hinther · Post by **Brian Hinther** » Fri May 11, 2007 8:53 pm

Thanks, Rested Gal, for posting that synopsis. I'm sure it was a lot easier to read than witnessing the event live!

rested gal · Post by **rested gal** » Sat May 12, 2007 12:40 pm

I used to attend (online) the TAS product chats. Won a Breeze at one three years ago. The product chats are
essentially just an infomercial -- you aren't gonna hear any "downside" stuff about a mask from the company representative,
and the questions are submitted through the moderator. But the chance to win a mask just for "being there" is pretty neat.

Next one they have scheduled was announced in a post from Tracy, the woman who runs TalkAboutSleep,
when she recently listed the 5 mask winners from the Quattro chat:

Our next special event chat will take place on June 19th...

Topic will be another exciting new full face mask by ResMed named Mirage Liberty

ddpelp · Post by **ddpelp** » Sat May 12, 2007 12:55 pm

One problem though they said during the chat to get the fitting chart via a pdf file just email them at sales@talkaboutsleep.com

I did that right after and so far no reply, no fitting chart .. oh well guess to be expected..

cwsanfor · Post by **cwsanfor** » Sat May 12, 2007 1:34 pm

Resmed sent me one in a couple of days. PM me.

cwsanfor · Post by **cwsanfor** » Sat May 12, 2007 1:50 pm

Or never mind the PM and see if you can make the image at http://home.earthlink.net/~wallysanford/quattro.jpg work for you.

Cut inside the green outline I drew, and size it so that it is 5 1/8 inches tall.

abysmillard · Post by **abysmillard** » Sat May 12, 2007 3:02 pm

[quote="cwsanfor"]Or never mind the PM and see if you can make the image at http://home.earthlink.net/~wallysanford/quattro.jpg work for you.

Thanks for posting this, cwsanfor!

Guest · Post by **Guest** » Sat May 12, 2007 3:21 pm

Does anyone know is the 5 1/8 from the top of the green line to the bottom or is that from the top of the green line to the chin crease mark?

cwsanfor · Post by **cwsanfor** » Sat May 12, 2007 3:44 pm

The green line is just what I drew because the card didn't show up well on a white background. Upon reflection, I should have placed it on a colored background. Okay, done. refresh your browser.

Open it up in Paint, Fireworks, Photoshop, whatever you use, and scale it so that the whole card is 5 1/8 inches tall. Then cut it out.

Try it now. The height is 5 1/8 inches from the top of the card to the bottom of the card.

cwsanfor · Post by **cwsanfor** » Sat May 12, 2007 4:49 pm

You know, this would be easier to do in Adobe Acrobat.

Go to http://www.uncg.edu/~cwsanfor/quattro.pdf, save the pdf to your computer, or just print it from the browser. Be sure that is is scaled to 100% in Acrobat, and when you go to your printer settings, be sure it is scaled to 100%, not "fit to page" or such. You may need to select "reduce to printer margins".

When you print it, cut the green background off and measure to make sure it is 5 1/8" total height. This way, you won't have to fool with resizing and whatnot.

Mask

Additional Comments: Encore Pro 1.8

Mask

Mask

Additional Comments: Encore Pro 1.8

Mirage Quattro Moderated Chat...

Mirage Quattro Moderated Chat...

Fitting tool