Acceptable Leak for Resmed Air fit P 10

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
deerslayer
Posts: 1195
Joined: Tue Dec 11, 2007 10:46 am
Location: Mid Tn

Acceptable Leak for Resmed Air fit P 10

Post by deerslayer » Tue Jul 17, 2018 6:15 am

Consistently get round 26-28 Leak Along With a Smiley Face .
Anyone Have any Input ?
I Guess at my age working full time that I shouldn’t expect to wake up and feel like a 30 year old after 7.5 -8 hrs. Just want to Optimize the sleep I do get. Feel Blest to do what I can do !
Total Scores generally read 0.6-1.6@11.5 pressure
In week I go to a new Respironics machine after putting 17,000hrs on current *
Thanks
Tim

_________________
MachineMask
Additional Comments: straight cpap 12.20 AHI avg.0.79
RESMED AUTOSET 11/ P 10 NASAL PILLOWS /straight cpap 11.50/ AHI 1.0 per hr

Feeling Blessed & firmly believe in The Holy Trinity 🙏

User avatar
Pugsy
Posts: 65115
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Acceptable Leak for Resmed Air fit P 10

Post by Pugsy » Tue Jul 17, 2018 6:27 am

deerslayer wrote:
Tue Jul 17, 2018 6:15 am
Consistently get round 26-28 Leak Along With a Smiley Face .
The 26 to 28 is that from the machine LCD screen? If so, that's just the 95% number and all it means is for 95% of the time you were at that number OR BELOW for 95% of the time.
Mr Smiley will show up until you spend at least 30% of the time over 24 L/min and that actually takes a lot of time.

Are leaks waking you up? If not, I wouldn't worry about these numbers.
Are you feeling decent during the day? If so, I wouldn't worry about leak numbers like this. It takes very little excess leak to elevate 95% numbers making it look worse than it really is.

The machine is still fairly accurate in terms of reporting events up to around 35 L/min or so and after that it gets a bit iffy...so I think your AHI is probably accurate and the machine is unlikely to be missing events and if it is maybe 1 or 2 and not enough to greatly impact things.

If it were me I wouldn't give these numbers a second look as long as the leaks didn't wake me up and I was waking up feeling decent the next day.
And yes, it would be nice if cpap could make us feel like we were 30 again but the other stuff that comes with getting older just sometimes puts a monkey wrench into that idea. I still don't wake up rearing to go run a marathon but at least I don't wake up feeling like I just ran one and got run over by a bus at the finish line. :lol:
My main issue that cpap can't fix...pain and sleep maintenance insomnia from that pain. How I feel the next day is directly related to the hours of sleep I get and how many wake ups from pain that I have. Doesn't matter what the leak or AHI is for me.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
deerslayer
Posts: 1195
Joined: Tue Dec 11, 2007 10:46 am
Location: Mid Tn

Re: Acceptable Leak for Resmed Air fit P 10

Post by deerslayer » Tue Jul 17, 2018 7:11 am

Thank You Pugsy Much Appreciated ! Guess i'm trying to Over Think :( , Instead should count my Blessings *

_________________
MachineMask
Additional Comments: straight cpap 12.20 AHI avg.0.79
RESMED AUTOSET 11/ P 10 NASAL PILLOWS /straight cpap 11.50/ AHI 1.0 per hr

Feeling Blessed & firmly believe in The Holy Trinity 🙏

prodigyplace
Posts: 1795
Joined: Mon Mar 27, 2017 5:45 pm
Location: Central Virginia

Re: Acceptable Leak for Resmed Air fit P 10

Post by prodigyplace » Tue Jul 17, 2018 10:02 am

Pugsy, Your deer avatar needs to be careful around deerslayer... :mrgreen: :roll: :lol:

_________________
Machine: AirSense 11 Autoset
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: ClimateLineAir Heated Tube & Sleepyhead software
Please visit our sponsor, CPAP.com at https://www.cpap.com/ for all your CPAP needs.

alancalan
Posts: 121
Joined: Wed Dec 27, 2006 4:27 am

Re: Acceptable Leak for Resmed Air fit P 10

Post by alancalan » Tue Jul 17, 2018 12:19 pm

When I take off the P10 it can run for 10 minutes. I am averaging 15 on the leaks but on large leaks 160 and I think that comes from when I pull off the mask. if I disconnect the mask from the tube, it shuts off right away. I have a s9 auto vpap.

_________________
MachineMask
Additional Comments: also have mirage activa 2nasal masks but using the p10

User avatar
Pugsy
Posts: 65115
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Acceptable Leak for Resmed Air fit P 10

Post by Pugsy » Tue Jul 17, 2018 1:20 pm

alancalan wrote:
Tue Jul 17, 2018 12:19 pm
When I take off the P10 it can run for 10 minutes.
Yes...I have this happen now with my AirSense 10 machine and I had it happen with the S9 I had.
The auto on part of SmartStart works great but the auto off part doesn't work so great and in fact won't work at all.
For this reason I just manually always reach over and turn off the machine when I take the mask off.

For some reason at some pressure with some masks (especially nasal pillow) the auto off part doesn't work so great. The resistance by just the pillow alone is enough to keep the machine from sensing no one is at the other end of the hose.
This is mentioned in the manual ...it's that common.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
palerider
Posts: 32299
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: Acceptable Leak for Resmed Air fit P 10

Post by palerider » Tue Jul 17, 2018 1:56 pm

alancalan wrote:
Tue Jul 17, 2018 12:19 pm
When I take off the P10 it can run for 10 minutes. I am averaging 15 on the leaks but on large leaks 160 and I think that comes from when I pull off the mask. if I disconnect the mask from the tube, it shuts off right away. I have a s9 auto vpap.
Do make sure you've got the mask setting to 'pillows', on the machine.

I've got a S9, and when I first switched to the P10, first time I took the mask off, the machine didn't shut off... I was disappointed, because I love the smartstart auto on/off... then I remembered I hadn't changed the mask type... I set it to 'pillows', and since then, it's shut off within a few seconds, every time.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
Pugsy
Posts: 65115
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Acceptable Leak for Resmed Air fit P 10

Post by Pugsy » Tue Jul 17, 2018 2:05 pm

palerider wrote:
Tue Jul 17, 2018 1:56 pm
Do make sure you've got the mask setting to 'pillows', on the machine.

I've got a S9, and when I first switched to the P10, first time I took the mask off, the machine didn't shut off... I was disappointed, because I love the smartstart auto on/off... then I remembered I hadn't changed the mask type... I set it to 'pillows', and since then, it's shut off within a few seconds, every time.
Mine still doesn't but I think it is because of my minimum pressure and the small size of the pillows.
It might turn off if I used more pressure (but why would I want to do that) or maybe with a larger pillow but again I see no reason. It's not that big of a deal to reach over and just push the button. If it was a big deal...I would just unhook the mask from the long hose instead.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
palerider
Posts: 32299
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: Acceptable Leak for Resmed Air fit P 10

Post by palerider » Tue Jul 17, 2018 2:25 pm

Pugsy wrote:
Tue Jul 17, 2018 2:05 pm
palerider wrote:
Tue Jul 17, 2018 1:56 pm
Do make sure you've got the mask setting to 'pillows', on the machine.

I've got a S9, and when I first switched to the P10, first time I took the mask off, the machine didn't shut off... I was disappointed, because I love the smartstart auto on/off... then I remembered I hadn't changed the mask type... I set it to 'pillows', and since then, it's shut off within a few seconds, every time.
Mine still doesn't but I think it is because of my minimum pressure and the small size of the pillows.
It might turn off if I used more pressure (but why would I want to do that) or maybe with a larger pillow but again I see no reason. It's not that big of a deal to reach over and just push the button. If it was a big deal...I would just unhook the mask from the long hose instead.
With my headboard, and side table, the machine's not where it's handy to reach... so for me, the smartstart is glorious :D

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
deerslayer
Posts: 1195
Joined: Tue Dec 11, 2007 10:46 am
Location: Mid Tn

Re: Acceptable Leak for Resmed Air fit P 10

Post by deerslayer » Tue Jul 17, 2018 7:59 pm

prodigyplace wrote:
Tue Jul 17, 2018 10:02 am
Pugsy, Your deer avatar needs to be careful around deerslayer... :mrgreen: :roll: :lol:

No Worries, i haven't hunted in five years :wink:

was tweaking settings today on the S9 and saw options...Hmmm never noticed the medium or fast inhale after all these years. Going to try fast tonight, still keeping EPR at 3 and definitely no ramp .

_________________
MachineMask
Additional Comments: straight cpap 12.20 AHI avg.0.79
RESMED AUTOSET 11/ P 10 NASAL PILLOWS /straight cpap 11.50/ AHI 1.0 per hr

Feeling Blessed & firmly believe in The Holy Trinity 🙏

User avatar
deerslayer
Posts: 1195
Joined: Tue Dec 11, 2007 10:46 am
Location: Mid Tn

Re: Acceptable Leak for Resmed Air fit P 10

Post by deerslayer » Wed Jul 25, 2018 7:17 pm

3rd night with the dream station tonight.Definitely a learning curve from the S9 , but determined to get it dialed in *

_________________
MachineMask
Additional Comments: straight cpap 12.20 AHI avg.0.79
RESMED AUTOSET 11/ P 10 NASAL PILLOWS /straight cpap 11.50/ AHI 1.0 per hr

Feeling Blessed & firmly believe in The Holy Trinity 🙏