help understanding data from encore
help understanding data from encore
Hello everyone. I am interested in trying to understand some data from encore basic. I cant use sleepy head with my machine yet so this is what I have. I have an appointment next week to see an anrp or something like that at the doctors office I usually go to. I have an st machine I was trying to get an asv machine however they had ordered the st and since its only being rented I have hope that if it doesnt work out well then I can easily change. but since I am going next week to see someone who I feel is more compitent than my doctor I would like to understand a little about my data. what would the best way to upload it be? Screen shots?
Respironics Bipap S/T Model# 1060P
Remed Airfit F10
Remed Airfit F10
-
Sleeprider
- Posts: 1562
- Joined: Tue May 06, 2008 5:57 pm
- Location: Murrysville, PA
Re: help understanding data from encore
The EncoreBasic program lets you view detailed information, from which you could save screenshots and upload those to Imgur, Photobucket or other hosting site, or you can save a detailed report as a PDF and share that through a file sharing service like dropbox. Either will work, however much more information will be in a full report PDF than a single image. Also, EncoreBasic can produce a waveform chart for your last night of data. This has the most specific information about events and what is going on when they occur. Again, waveform data can be saved as a PDF report.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Sleepyhead software. Just changed from PRS1 BiPAP Auto DS760TS |
Re: help understanding data from encore
Sorry it took so long to update this post. here is the link to the data
https://www.dropbox.com/s/x7lngy471hltq ... d.pdf?dl=0
https://www.dropbox.com/s/x7lngy471hltq ... d.pdf?dl=0
Respironics Bipap S/T Model# 1060P
Remed Airfit F10
Remed Airfit F10
Re: help understanding data from encore
What you have posted is compliance summary info. Go to detail instead and pick a couple of pages with the days detail.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Sleepyhead Software |
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
-
Sleeprider
- Posts: 1562
- Joined: Tue May 06, 2008 5:57 pm
- Location: Murrysville, PA
Re: help understanding data from encore
That worked. I have no recommendations, but your AHI ranges from 1 to 4 and consists almost entirely of hypopnea events with some minor CA events (<1). Leaks are well within reason. Some of your sleeping seems fragmented, but we don't know why. Pressures IPAP and EPAP are fixed, so we can't really judge a response to different pressure settings. Overall, this seems to reflect effective therapy with some possible room for improvement of the hypopneas, which might respond to a higher EPAP.
What area of the data is something you'd like to know more about? Did you get any waveform data?
What area of the data is something you'd like to know more about? Did you get any waveform data?
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Sleepyhead software. Just changed from PRS1 BiPAP Auto DS760TS |
-
Sleeprider
- Posts: 1562
- Joined: Tue May 06, 2008 5:57 pm
- Location: Murrysville, PA
Re: help understanding data from encore
I downloaded 13 pages of data on a PDF...what did you see?OkyDoky wrote:What you have posted is compliance summary info. Go to detail instead and pick a couple of pages with the days detail.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Sleepyhead software. Just changed from PRS1 BiPAP Auto DS760TS |
Re: help understanding data from encore
How do I change the data? When I click download it says download compliance
Respironics Bipap S/T Model# 1060P
Remed Airfit F10
Remed Airfit F10
-
Sleeprider
- Posts: 1562
- Joined: Tue May 06, 2008 5:57 pm
- Location: Murrysville, PA
Re: help understanding data from encore
I don't understand. Your link has complete compliance, use patterns, long term trends, 7 daily charts of events, pressures, leaks etc, and summary data. https://www.dropbox.com/s/x7lngy471hltq ... d.pdf?dl=0
It looks to me like you saved the detailed data and uploaded it to dropbox.
It looks to me like you saved the detailed data and uploaded it to dropbox.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Sleepyhead software. Just changed from PRS1 BiPAP Auto DS760TS |
Re: help understanding data from encore
Yes it was the detailed data
Respironics Bipap S/T Model# 1060P
Remed Airfit F10
Remed Airfit F10
Re: help understanding data from encore
Ok, all I was getting was the first time I clicked on dropbox was the first 2 pages.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Sleepyhead Software |
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
