Encore Pro summary chart missing

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
Guest

Encore Pro summary chart missing

Post by Guest » Mon Apr 03, 2006 1:56 pm

Hi, I'm hoping someone out there can help. When I first started downloading data to Encore Pro, I could pull up the summary data for the last night only and at the bottom there would be a chart showing all the relevent data (AHI, flow, snores, pressure, etc.). Lately the chart is not showing up. I thought it might be because the card was full so I erased the card yesterday but the summary chart is still missing. I know the data is being downloaded because it all shows up in MyEncore. Any ideas?


Wulfman-

Post by Wulfman- » Mon Apr 03, 2006 2:34 pm

Are you selecting "Full Details" when you select and open up the night's download?

Den

Guest

Post by Guest » Mon Apr 03, 2006 7:36 pm

The chart is missing in both summary and detailed reports. They used to be there before

User avatar
Wulfman
Posts: 12316
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Post by Wulfman » Mon Apr 03, 2006 7:47 pm

Well, it doesn't have anything to do with the card being "full"......the older data is automatically over-written when it gets full. You don't have to erase it each time.

As long as you can see it in MyEncore, I would think that should tell you about all you need to know.

Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

User avatar
NightHawkeye
Posts: 2431
Joined: Thu Dec 29, 2005 11:55 am
Location: Iowa - The Hawkeye State

Re: Encore Pro summary chart missing

Post by NightHawkeye » Mon Apr 03, 2006 8:47 pm

Guest wrote:When I first started downloading data to Encore Pro, I could pull up the summary data for the last night only and at the bottom there would be a chart showing all the relevent data (AHI, flow, snores, pressure, etc.). Lately the chart is not showing up.
Guest, is this kinda what your chart used to look like in APAP mode?
Image

And is this what your chart now looks like in CPAP mode?
Image
If so, the explanation is that Encore Pro doesn't provide the summary chart when operated in CPAP mode, only in APAP mode.

Regards,
Bill


Guest

Post by Guest » Mon Apr 03, 2006 11:13 pm

"If so, the explanation is that Encore Pro doesn't provide the summary chart when operated in CPAP mode, only in APAP mode."


That's it!! I'd forgoten that I had switched from APAP to CPAP mode at the time the chart dissapeared. Thanks for clearing this up for me.[/quote]