maybe leak ?
maybe leak ?
Hi can someone answer this Question Please, I have a nasal mask and i am getting moisture round the edge when i am useing it does that mean a leak ? cause there is no sound of one HELP PLEASE Thankyou........Bob
Re: maybe leak ?
Your humidifier may be set too high
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
| Additional Comments: Back up is a new AS10. |
Re: maybe leak ?
Sounds more like moisture/rainout.
Do you use a humidifier? If so, is it up too high? Is your machine lower than your head (water can't drip up)?
You might care to register your equipment in your profile - helps us help you better.
cheers,
xena
Do you use a humidifier? If so, is it up too high? Is your machine lower than your head (water can't drip up)?
You might care to register your equipment in your profile - helps us help you better.
cheers,
xena
_________________
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: Dx 10/14/10. Also a T2 diabetic. High night/fasting numbers prompted a sleep study and here I am :-) |
Re: maybe leak ?
I agree that it sounds like rainout.
But it might not be as simple as turning the humidifier down: You may be getting rainout from the moisture you are exhaling into the mask: Moisture condenses when warm moist air hits something that is relatively cold: And compared to the temp of the air you are exhaling the mask and the air inside the mask are relatively cold.
But it might not be as simple as turning the humidifier down: You may be getting rainout from the moisture you are exhaling into the mask: Moisture condenses when warm moist air hits something that is relatively cold: And compared to the temp of the air you are exhaling the mask and the air inside the mask are relatively cold.
_________________
| Machine: DreamStation BiPAP® Auto Machine |
| Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: PR System DreamStation and Humidifier. Max IPAP = 9, Min EPAP=4, Rise time setting = 3, minPS = 3, maxPS=5 |
Re: maybe leak ?
Hi i dont have a humidifier as i only have a Res Med S8 Escape 11 Thankyou for Replys
- Perrybucsdad
- Posts: 834
- Joined: Mon Sep 12, 2011 7:09 am
- Location: Northeast Ohio
Re: maybe leak ?
Whats the humidity in your home? Our body naturally gives off humidity and augmented with the humidity in the air, that may be what is causing this. If it's not causing any issues, I wouldn't worry about it.
John
John
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: ResScan v5.9; Sleepyhead v1.0.0-beta |
Re: maybe leak ?
Unfortunately there is no way to monitor leaks with the ResMed Escape to make sure leaks aren't a problem but if you are sleeping well, feeling decent and that little bit of moisture in the mask (most likely rain out or condensation from your own breath as the others have said) isn't disturbing your sleep, then I wouldn't worry about it.
If it is bothersome and disturbing your sleep then even if it is not causing leaks, it is still unwanted because anything that disturbs our sleep is unwanted. Since you aren't using a humidifier there is nothing that can be adjusted on that end. So if it is disturbing sleep you need the room air warmer or fix some sort of cover that will insulate the mask (and not block vent holes) so condensation can be limited.
I know you don't use the mask that I use but this gives you an idea what I use to insulate my nasal pillows. If I didn't use this I would be snorting water all night and that does wake me up often.
http://www.padacheek.com/PACSwiftII_Barrel_cozy.html
One last thought. You can also use an independent heated hose.
I use this one. http://www.sleeprestfully.com/hybernite.asp I found it on EBay
Others use the Aussie heated hose http://www.sleepzone.com.au/showitems.a ... PAP%20Tube
There may be something similar in the UK.
Again, no real need to do anything if it isn't disturbing your sleep.
If it is bothersome and disturbing your sleep then even if it is not causing leaks, it is still unwanted because anything that disturbs our sleep is unwanted. Since you aren't using a humidifier there is nothing that can be adjusted on that end. So if it is disturbing sleep you need the room air warmer or fix some sort of cover that will insulate the mask (and not block vent holes) so condensation can be limited.
I know you don't use the mask that I use but this gives you an idea what I use to insulate my nasal pillows. If I didn't use this I would be snorting water all night and that does wake me up often.
http://www.padacheek.com/PACSwiftII_Barrel_cozy.html
One last thought. You can also use an independent heated hose.
I use this one. http://www.sleeprestfully.com/hybernite.asp I found it on EBay
Others use the Aussie heated hose http://www.sleepzone.com.au/showitems.a ... PAP%20Tube
There may be something similar in the UK.
Again, no real need to do anything if it isn't disturbing your sleep.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: maybe leak ?
Hi Thankyou all for your info........Bob
- chunkyfrog
- Posts: 34544
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: maybe leak ?
I perspire (in a ladylike way, of course) onto the cushion surface that touches my face.
It sometimes affects the seal--not always.
I keep unscented baby wipes handy so I can wipe the cushion and my face to make it more comfy.
It sometimes affects the seal--not always.
I keep unscented baby wipes handy so I can wipe the cushion and my face to make it more comfy.
_________________
| Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: Airsense 10 Autoset for Her |





