SD Card Question
SD Card Question
Why would my SD card not show data for last night? It does for every other night this month.
Sigh....just when I think I have it all figured out....
Sigh....just when I think I have it all figured out....
~Mama is happy when she sleeps with Pap-py~
- Perrybucsdad
- Posts: 834
- Joined: Mon Sep 12, 2011 7:09 am
- Location: Northeast Ohio
Re: SD Card Question
Did you have it write protected? Some have a little slider on the card that locks the card from being written to (I know my Resmed card has this). Have you tried rebooting the pc and inserting the card again? Maybe it just didn't read the card correctly.
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: ResScan v5.9; Sleepyhead v1.0.0-beta |
Re: SD Card Question
Was the card all the way in?
Make sure you didn't have card in "read only" with the little switch on the SD card. If you didn't mess with this yesterday it won't be a factor.
Try this...reinsert card and make sure the machine recognizes it on the LCD screen. Wait 60 seconds. Remove the card and download the data again. See if it shows up. Data except for wave flow is stored on the machine and should write to the card if it wasn't there just a little while ago (as in card not fully inserted last night). You should not lose anything except wave flow.
I have left card out over night..realized it next morning...put card in the machine...give it a few seconds to recognize the card and write to it...removed card and put in computer and the only data lost is wave flow. Rest of the data is there.
Make sure you didn't have card in "read only" with the little switch on the SD card. If you didn't mess with this yesterday it won't be a factor.
Try this...reinsert card and make sure the machine recognizes it on the LCD screen. Wait 60 seconds. Remove the card and download the data again. See if it shows up. Data except for wave flow is stored on the machine and should write to the card if it wasn't there just a little while ago (as in card not fully inserted last night). You should not lose anything except wave flow.
I have left card out over night..realized it next morning...put card in the machine...give it a few seconds to recognize the card and write to it...removed card and put in computer and the only data lost is wave flow. Rest of the data is there.
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
- Lizistired
- Posts: 2835
- Joined: Tue Dec 14, 2010 10:47 pm
- Location: Indiana
Re: SD Card Question
It's possible that the card wasn't inserted in the cpap all the way. If you re-insert it in the cpap, it should write whatever data it has that is not on the card.
_________________
| Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
| Additional Comments: Swift FX sometimes, CMS-50F, Cervical collar sometimes, White noise, Zeo... I'm not well, but I'm better. |
ResScan: http://www.resmed.com/int/assets/html/s ... c=patients
ResScan Tutorial- http://montfordhouse.com/cpap/resscan_tutorial/
Machines Video: http://www.cpaplibrary.com/machine-education
ResScan Tutorial- http://montfordhouse.com/cpap/resscan_tutorial/
Machines Video: http://www.cpaplibrary.com/machine-education
Re: SD Card Question
Brilliant as usual!
Whew! Glad the fix was so simple.
Whew! Glad the fix was so simple.
~Mama is happy when she sleeps with Pap-py~
Re: SD Card Question
So what was your problem?
_________________
| Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
| Additional Comments: 14/8.4,PS=4, UMFF, 02@2L, |
"Do or Do Not-There Is No Try"-"Yoda"
"We are what we repeatedly do,so excellence
is not an act but a habit"-"Aristotle"
DEAR HUBBY BEGAN CPAP 9/2/08
"We are what we repeatedly do,so excellence
is not an act but a habit"-"Aristotle"
DEAR HUBBY BEGAN CPAP 9/2/08
Re: SD Card Question
I guess the card wasn't in the slot all the way last night. After pushing it in, leaving it for a minute, then reloading onto the computer it all came out fine
~Mama is happy when she sleeps with Pap-py~
Re: SD Card Question
Well you aren't the first and sure won't be the last to do that. I always watch the LCD screen when I insert the SD card to make sure the machine recognizes it. Of course doesn't do me any good when I leave the SD card in the computer over night. It is nice that only data we lose is the waveform flow data. Not a deal breaking loss.Resister wrote:I guess the card wasn't in the slot all the way last night
_________________
| Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
| Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
- Perrybucsdad
- Posts: 834
- Joined: Mon Sep 12, 2011 7:09 am
- Location: Northeast Ohio
Re: SD Card Question
"I hate it when you don't stick it in the slot all the way."
That's what she said
That's what she said
_________________
| Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
| Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
| Additional Comments: ResScan v5.9; Sleepyhead v1.0.0-beta |
Re: SD Card Question
Ohhhh ewwwww lol!Perrybucsdad wrote:"I hate it when you don't stick it in the slot all the way."
That's what she said
~Mama is happy when she sleeps with Pap-py~
Re: SD Card Question
Especially embarrassing when you knew you had the card in all the wayPerrybucsdad wrote:"I hate it when you don't stick it in the slot all the way."
That's what she said
ResMed S9 Autoset
ResMed AirFit F20 mask with headgear
ResMed AirFit F20 mask with headgear




